From: Steffen Maier Date: Tue, 26 Mar 2019 14:36:59 +0100 Subject: scsi: zfcp: fix scsi_eh host reset with port_forced ERP for non-NPIV FCP devices Git-commit: 242ec1455151267fe35a0834aa9038e4c4670884 Patch-mainline: v5.1-rc3 References: bsc#1051510 Suppose more than one non-NPIV FCP device is active on the same channel. Send I/O to storage and have some of the pending I/O run into a SCSI command timeout, e.g. due to bit errors on the fibre. Now the error situation stops. However, we saw FCP requests continue to timeout in the channel. The abort will be successful, but the subsequent TUR fails. Scsi_eh starts. The LUN reset fails. The target reset fails. The host reset only did an FCP device recovery. However, for non-NPIV FCP devices, this does not close and reopen ports on the SAN-side if other non-NPIV FCP device(s) share the same open ports. In order to resolve the continuing FCP request timeouts, we need to explicitly close and reopen ports on the SAN-side. This was missing since the beginning of zfcp in v2.6.0 history commit ea127f975424 ("[PATCH] s390 (7/7): zfcp host adapter."). Note: The FSF requests for forced port reopen could run into FSF request timeouts due to other reasons. This would trigger an internal FCP device recovery. Pending forced port reopen recoveries would get dismissed. So some ports might not get fully reopened during this host reset handler. However, subsequent I/O would trigger the above described escalation and eventually all ports would be forced reopen to resolve any continuing FCP request timeouts due to earlier bit errors. Signed-off-by: Steffen Maier Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: #3.0+ Reviewed-by: Jens Remus Reviewed-by: Benjamin Block Signed-off-by: Martin K. Petersen Acked-by: Petr Tesarik --- drivers/s390/scsi/zfcp_erp.c | 14 ++++++++++++++ drivers/s390/scsi/zfcp_ext.h | 2 ++ drivers/s390/scsi/zfcp_scsi.c | 4 ++++ 3 files changed, 20 insertions(+) --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -652,6 +652,20 @@ static void zfcp_erp_strategy_memwait(st add_timer(&erp_action->timer); } +void zfcp_erp_port_forced_reopen_all(struct zfcp_adapter *adapter, + int clear, char *dbftag) +{ + unsigned long flags; + struct zfcp_port *port; + + write_lock_irqsave(&adapter->erp_lock, flags); + read_lock(&adapter->port_list_lock); + list_for_each_entry(port, &adapter->port_list, list) + _zfcp_erp_port_forced_reopen(port, clear, dbftag); + read_unlock(&adapter->port_list_lock); + write_unlock_irqrestore(&adapter->erp_lock, flags); +} + static void _zfcp_erp_port_reopen_all(struct zfcp_adapter *adapter, int clear, char *id) { --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -68,6 +68,8 @@ extern void zfcp_erp_clear_port_status(s extern int zfcp_erp_port_reopen(struct zfcp_port *, int, char *); extern void zfcp_erp_port_shutdown(struct zfcp_port *, int, char *); extern void zfcp_erp_port_forced_reopen(struct zfcp_port *, int, char *); +extern void zfcp_erp_port_forced_reopen_all(struct zfcp_adapter *adapter, + int clear, char *dbftag); extern void zfcp_erp_set_lun_status(struct scsi_device *, u32); extern void zfcp_erp_clear_lun_status(struct scsi_device *, u32); extern void zfcp_erp_lun_reopen(struct scsi_device *, int, char *); --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -326,6 +326,10 @@ static int zfcp_scsi_eh_host_reset_handl struct zfcp_adapter *adapter = zfcp_sdev->port->adapter; int ret = SUCCESS, fc_ret; + if (!(adapter->connection_features & FSF_FEATURE_NPIV_MODE)) { + zfcp_erp_port_forced_reopen_all(adapter, 0, "schrh_p"); + zfcp_erp_wait(adapter); + } zfcp_erp_adapter_reopen(adapter, 0, "schrh_1"); zfcp_erp_wait(adapter); fc_ret = fc_block_scsi_eh(scpnt);