diff --git a/patches.suse/net-qrtr-support-suspend-hibernation.patch b/patches.suse/net-qrtr-support-suspend-hibernation.patch
new file mode 100644
index 0000000..fbf76d1
--- /dev/null
+++ b/patches.suse/net-qrtr-support-suspend-hibernation.patch
@@ -0,0 +1,88 @@
+From: Baochen Qiang <quic_bqiang@quicinc.com>
+Subject: [PATCH 2/3] net: qrtr: support suspend/hibernation
+Date: Wed, 21 Feb 2024 11:00:25 +0800
+Message-id: <20240221030026.10553-3-quic_bqiang@quicinc.com>
+Patch-mainline: Submitted, linux-wireless ML
+References: bsc#1207948
+
+MHI devices may not be destroyed during suspend/hibernation, so need
+to unprepare/prepare MHI channels throughout the transition.
+
+The RFC version adds new API to MHI stack with which an MHI controller
+driver can do unprepare/prepare directly by itself, see
+
+https://patchwork.kernel.org/project/linux-wireless/patch/20231127162022.518834-3-kvalo@kernel.org/
+
+Although it works well Mani pointed out that the design is not good
+because MHI channels are managed by MHI client driver thus should not
+be touched by others. See the discussion
+
+https://lore.kernel.org/mhi/20231127162022.518834-1-kvalo@kernel.org/
+
+This version changes to add suspend/resume callbacks to achieve the
+same purpose. The suspend callback is called in the late suspend stage,
+this means MHI channels are still alive at suspend stage, and that makes
+it possible for an MHI controller driver to communicate with others over
+those channels at suspend stage. While the resume callback is called in
+the early resume stage, for a similar reason.
+
+Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
+
+Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
+Acked-by: Takashi Iwai <tiwai@suse.de>
+
+---
+ net/qrtr/mhi.c | 29 +++++++++++++++++++++++++++++
+ 1 file changed, 29 insertions(+)
+
+diff --git a/net/qrtr/mhi.c b/net/qrtr/mhi.c
+index 9ced13c0627a..b54a6c2113e9 100644
+--- a/net/qrtr/mhi.c
++++ b/net/qrtr/mhi.c
+@@ -118,6 +118,32 @@ static const struct mhi_device_id qcom_mhi_qrtr_id_table[] = {
+ };
+ MODULE_DEVICE_TABLE(mhi, qcom_mhi_qrtr_id_table);
+ 
++static int qcom_mhi_qrtr_pm_suspend_late(struct device *dev)
++{
++	struct mhi_device *mhi_dev = container_of(dev, struct mhi_device, dev);
++
++	mhi_unprepare_from_transfer(mhi_dev);
++
++	return 0;
++}
++
++static int qcom_mhi_qrtr_pm_resume_early(struct device *dev)
++{
++	struct mhi_device *mhi_dev = container_of(dev, struct mhi_device, dev);
++	int rc;
++
++	rc = mhi_prepare_for_transfer_autoqueue(mhi_dev);
++	if (rc)
++		dev_err(dev, "failed to prepare for autoqueue transfer %d\n", rc);
++
++	return rc;
++}
++
++static const struct dev_pm_ops __maybe_unused qcom_mhi_qrtr_pm_ops = {
++	SET_LATE_SYSTEM_SLEEP_PM_OPS(qcom_mhi_qrtr_pm_suspend_late,
++				     qcom_mhi_qrtr_pm_resume_early)
++};
++
+ static struct mhi_driver qcom_mhi_qrtr_driver = {
+ 	.probe = qcom_mhi_qrtr_probe,
+ 	.remove = qcom_mhi_qrtr_remove,
+@@ -126,6 +152,9 @@ static struct mhi_driver qcom_mhi_qrtr_driver = {
+ 	.id_table = qcom_mhi_qrtr_id_table,
+ 	.driver = {
+ 		.name = "qcom_mhi_qrtr",
++#ifdef CONFIG_PM
++		.pm = &qcom_mhi_qrtr_pm_ops,
++#endif
+ 	},
+ };
+ 
+-- 
+2.25.1
+
+
diff --git a/series.conf b/series.conf
index ed164f9..c87c0f1 100644
--- a/series.conf
+++ b/series.conf
@@ -196,6 +196,7 @@
 	patches.suse/wifi-ath11k-fix-warning-on-DMA-ring-capabilities-eve.patch
 	patches.suse/wifi-ath11k-thermal-don-t-try-to-register-multiple-t.patch
 	patches.suse/bus-mhi-host-add-mhi_power_down_no_destroy.patch
+	patches.suse/net-qrtr-support-suspend-hibernation.patch
 
 	########################################################
 	# USB