From 25edf91501b878f548ff1c96692e54684b0f586a Mon Sep 17 00:00:00 2001 From: Shashank Sharma Date: Fri, 21 Jul 2017 20:55:07 +0530 Subject: [PATCH] drm/i915: prepare csc unit for YCBCR420 output Git-commit: 25edf91501b878f548ff1c96692e54684b0f586a Patch-mainline: v4.14-rc1 References: FATE#322643 bsc#1055900 To support ycbcr output, we need a pipe CSC block to do RGB->YCBCR conversion. Current Intel platforms have only one pipe CSC unit, so we can either do color correction using it, or we can perform RGB->YCBCR conversion. This function adds a csc handler, which uses recommended bspec values to perform RGB->YCBCR conversion (target color space BT709) V2: Rebase V3: Rebase V4: Rebase V5: Addressed review comments from Ander - Remove extra line added in the patch - Add the spec details in the commit message - Combine two if(cond) while calling intel_crtc_compute_config V6: Handle YCBCR420 outputs only (Ville) V7: Addressed review comments from Ville: - Add description about target colorspace - Remove the comments from CSC function - DRM_DEBUG->DEBUG_KMS for atomic failure due to CSC unit busy - Remove unnecessary debug message about YCBCR420 possibe V8: Addressed review comments from Ville: - Remove extra comment, not required. - Do not add extra variable for CTM, reuse pipe_config Added r-b from Ville V9: Remove extra whitespace (Imre) V10: Added r-b from Imre Cc: Ville Syrjala Cc: Daniel Vetter Cc: Ander Conselvan de Oliveira Cc: Imre Deak Reviewed-by: Ville Syrjala Reviewed-by: Imre Deak Signed-off-by: Shashank Sharma Signed-off-by: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-5-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter Acked-by: Takashi Iwai --- drivers/gpu/drm/i915/intel_color.c | 45 ++++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_display.c | 10 +++++++ 2 files changed, 54 insertions(+), 1 deletion(-) --- a/drivers/gpu/drm/i915/intel_color.c +++ b/drivers/gpu/drm/i915/intel_color.c @@ -41,6 +41,22 @@ #define LEGACY_LUT_LENGTH (sizeof(struct drm_color_lut) * 256) +/* Post offset values for RGB->YCBCR conversion */ +#define POSTOFF_RGB_TO_YUV_HI 0x800 +#define POSTOFF_RGB_TO_YUV_ME 0x100 +#define POSTOFF_RGB_TO_YUV_LO 0x800 + +/* + * These values are direct register values specified in the Bspec, + * for RGB->YUV conversion matrix (colorspace BT709) + */ +#define CSC_RGB_TO_YUV_RU_GU 0x2ba809d8 +#define CSC_RGB_TO_YUV_BU 0x37e80000 +#define CSC_RGB_TO_YUV_RY_GY 0x1e089cc0 +#define CSC_RGB_TO_YUV_BY 0xb5280000 +#define CSC_RGB_TO_YUV_RV_GV 0xbce89ad8 +#define CSC_RGB_TO_YUV_BV 0x1e080000 + /* * Extract the CSC coefficient from a CTM coefficient (in U32.32 fixed point * format). This macro takes the coefficient we want transformed and the @@ -91,6 +107,30 @@ static void ctm_mult_by_limited(uint64_t } } +void i9xx_load_ycbcr_conversion_matrix(struct intel_crtc *intel_crtc) +{ + int pipe = intel_crtc->pipe; + struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev); + + I915_WRITE(PIPE_CSC_PREOFF_HI(pipe), 0); + I915_WRITE(PIPE_CSC_PREOFF_ME(pipe), 0); + I915_WRITE(PIPE_CSC_PREOFF_LO(pipe), 0); + + I915_WRITE(PIPE_CSC_COEFF_RU_GU(pipe), CSC_RGB_TO_YUV_RU_GU); + I915_WRITE(PIPE_CSC_COEFF_BU(pipe), CSC_RGB_TO_YUV_BU); + + I915_WRITE(PIPE_CSC_COEFF_RY_GY(pipe), CSC_RGB_TO_YUV_RY_GY); + I915_WRITE(PIPE_CSC_COEFF_BY(pipe), CSC_RGB_TO_YUV_BY); + + I915_WRITE(PIPE_CSC_COEFF_RV_GV(pipe), CSC_RGB_TO_YUV_RV_GV); + I915_WRITE(PIPE_CSC_COEFF_BV(pipe), CSC_RGB_TO_YUV_BV); + + I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), POSTOFF_RGB_TO_YUV_HI); + I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), POSTOFF_RGB_TO_YUV_ME); + I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), POSTOFF_RGB_TO_YUV_LO); + I915_WRITE(PIPE_CSC_MODE(pipe), 0); +} + /* Set up the pipe CSC unit. */ static void i9xx_load_csc_matrix(struct drm_crtc_state *crtc_state) { @@ -101,7 +141,10 @@ static void i9xx_load_csc_matrix(struct uint16_t coeffs[9] = { 0, }; struct intel_crtc_state *intel_crtc_state = to_intel_crtc_state(crtc_state); - if (crtc_state->ctm) { + if (intel_crtc_state->ycbcr420) { + i9xx_load_ycbcr_conversion_matrix(intel_crtc); + return; + } else if (crtc_state->ctm) { struct drm_color_ctm *ctm = (struct drm_color_ctm *)crtc_state->ctm->data; uint64_t input[9] = { 0, }; --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6147,6 +6147,16 @@ static int intel_crtc_compute_config(str return -EINVAL; } + if (pipe_config->ycbcr420 && pipe_config->base.ctm) { + /* + * There is only one pipe CSC unit per pipe, and we need that + * for output conversion from RGB->YCBCR. So if CTM is already + * applied we can't support YCBCR420 output. + */ + DRM_DEBUG_KMS("YCBCR420 and CTM together are not possible\n"); + return -EINVAL; + } + /* * Pipe horizontal size must be even in: * - DVO ganged mode