-------------------------------------------------------------------
Thu Feb 2 14:31:01 UTC 2023 - Hans-Peter Jansen <hpj@urpla.net>
- Catch another invalid state in %post: DRIVEDB_H_RELEASE_SAVED
might end up empty
-------------------------------------------------------------------
Thu Apr 21 11:48:36 UTC 2022 - Dirk Müller <dmueller@suse.com>
- refresh keyring with new signing key
-------------------------------------------------------------------
Fri Apr 15 15:04:26 UTC 2022 - Stefan Seyfried <seife+obs@b1-systems.com>
- update to version 7.3
- see NEWS and ChangeLog file for full details
- Remove smartmontools-drivedb.h. Up to date version is included
in release tarball
- packaging: try to fix smartmontools-drivedb_h-update.sh
-------------------------------------------------------------------
Thu Feb 17 14:50:19 UTC 2022 - Stanislav Brabec <sbrabec@suse.com>
- Restart smartd and generate smartd_opts only if there are real
sysconfig changes; do not trigger generate_smartd_opts by YaST,
systemd is enough (bsc#1195785).
-------------------------------------------------------------------
Mon Nov 29 23:43:53 UTC 2021 - Stanislav Brabec <sbrabec@suse.com>
- Update smartmontools-drivedb.h to the latest version from the
upstream branch RELEASE_7_2_DRIVEDB.
-------------------------------------------------------------------
Wed Nov 17 10:18:54 UTC 2021 - Johannes Segitz <jsegitz@suse.com>
- Added hardening to systemd service(s) (bsc#1181400). Added patch(es):
* harden_smartd.service.patch
Modified:
* smartd_generate_opts.service
-------------------------------------------------------------------
Tue Aug 24 14:32:48 UTC 2021 - Stanislav Brabec <sbrabec@suse.com>
- smartmontools-drivedb_h-update.sh: Fix update needed logic.
- Add smartmontools-drivedb.h, the latest version from the upstream
branch RELEASE_7_2_DRIVEDB.
-------------------------------------------------------------------
Wed Jan 6 12:10:43 UTC 2021 - Dirk Müller <dmueller@suse.com>
- update to 7.2:
- smartctl: New option '--json=y[c]' selects YAML output.
- smartctl '-i': Prints ATA TRIM and Zoned Device capabilities.
- smartctl '-j': Fixed 'scsi_grown_defect_list' value.
- smartctl '-a': Prints SCSI 'Accumulated power on time'.
- smartctl '-n POWERMODE': SCSI support.
- smartctl '-s standby,now' and '-s standby,off': SCSI support.
- smartctl '-c': NVMe 1.4 additions.
- smartd: Support for staggered self-tests.
- smartd: No longer writes attribute log if no attributes were read
due to standby mode or other error.
- smartd: Now resolves symlinks before device names are checked for
duplicates.
- smartd: Fixed SMARTD_DEVICETYPE environment variable if DEVICESCAN is
used without '-d TYPE'.
- ATA: Device type '-d jmb39x-q,N' for JMB39x protocol variant used by
some QNAP NAS devices.
- ATA: Device type '-d jms56x,N' for JMS562 USB to SATA RAID bridges.
- SCSI: Improved heuristics for log subpages of new and very old disks.
- NVMe: Log transfer size limited to avoid device or kernel crashes.
- NVMEe/USB: Device type '-d sntrealtek' for Realtek RTL9210 USB to
NVMe bridges.
- update-smart-drivedb: New option '--branch X.Y'.
- HDD, SSD and USB additions to drive database.
- Dropped support for pre-C99 snprintf().
- configure: Dropped option '--without-working-snprintf'.
- configure: Fixed '-fstack-protector*' detection.
- Linux: Various fixes of smartd.service file (bsc#1183699).
- Darwin: NVMe log support.
- FreeBSD: Device scan does no longer include T_ENCLOSURE devices.
- NetBSD: Fixed timeout handling.
- NetBSD big endian: Fixed ATA register handling.
- OpenBSD: Fixed timeout handling.
- Windows: Dropped backward compatibility fixes for very old compilers.
- drop smartd-service-novm.patch (upstream)
- drop smartmontools-smartd-service.patch
(SLE+Leap, now in upstream, bsc#1183699)
-------------------------------------------------------------------
Sat Jan 4 01:53:52 UTC 2020 - Stanislav Brabec <sbrabec@suse.com>
- Update to version 7.1:
* smartctl: Fixed bogus exception on unknown form factor value.
* smartctl '--json=cg': Suppresses extra spaces also in 'g'
format.
* smartctl '-i': ATA ACS-4 and ACS-5 enhancements.
* smartd: No longer truncates very long device names in warning
emails.
* smartd: No longer skips scheduled tests if system clock has
been adjusted to the past.
* smartd '-A': Attribute logs now use local time instead of UTC.
* ATA: Device type '-d jmb39x,N' for drives behind JMicron JMB39x
RAID port multipliers.
* SCSI: Workaround for incomplete Log subpages response from some
SAS SSDs.
* HDD, SSD and USB additions to drive database.
* Autodetection of '-d sntjmicron' type for JMicron USB to NVMe
bridges.
* Fixed segfault on CCISS transfer sizes > 512 bytes.
* Fixed smartd.service 'Type' if libsystemd-dev is not available.
* Fixed '/dev/megaraid_sas_ioctl_node' fd leak.
* Fixed GPL licensing problem of 'linux_nvme_ioctl.h'
(smartmontools#1226,
drop smartmontools-nvme_ioctl_h-license.patch).
- Update smartmontools.keyring. Developers use new key.
- smartmontools-drivedb_h-update.sh: Recognize equal files in
different commits.
- Drop smartmontools-nvme_ioctl_h-license.patch (SLE+Leap,
now in upstream, https://www.smartmontools.org/ticket/1226)
- Remove smartmontools-drivedb.h. No update available in the
upstream branch RELEASE_7_0_DRIVEDB.
-------------------------------------------------------------------
Thu Dec 19 14:52:51 UTC 2019 - Dominique Leuenberger <dimstar@opensuse.org>
- BuildRequire pkgconfig(libsystemd) instead of systemd-devel:
Allow OBS to shortcut through the -mini flavors.
-------------------------------------------------------------------
Tue Aug 6 18:50:22 CEST 2019 - sbrabec@suse.com
- Fix license of nvme_ioctl.h
(https://www.smartmontools.org/ticket/1226,
smartmontools-nvme_ioctl_h-license.patch).
-------------------------------------------------------------------
Tue Jun 4 09:42:28 UTC 2019 - rw@suse.com
- Update to 7.0 version
- smartctl
* New options '-j' and '--json[=giosu]' to enable experimental
JSON output mode. Also supports an alternative flat format
suitable for grep ('--json=g').
* '-l devstat': Fix for logs with 256 sectors.
* '-l error': Prints SCSI Pending Defects log page if supported.
* '-H': Prints SCSI Format Status log page if supported.
* '-x': Now includes '-l defects'.
* New option '-d scsi+TYPE' to disable SAT auto detection for
'aacraid' and 'cciss'.
- NVMe/USB: Device type '-d sntjmicron' for NVMe drives behind
JMicron USB to NVMe bridges.
- NVMe: SMART/Health Information and Error Information are always
read with broadcast NSID.
- SCSI: Various improvements for the decoding of log pages.
- SCSI: Improved handling of READ CAPACITY command.
- SCSI: Support for SAS host managed drives.
- update-smart-drivedb: New option '-u github'.
- update-smart-drivedb: New signing key.
- HDD, SSD and USB additions to drive database.
- Always use '-d sat' for USB vendor IDs with known SAT support.
- Linux
* Device scan with '-d by-id' scans '/dev/disk/by-id/*' symlinks.
* Dropped device scan support for devfs.
* Fixed device scan with multiple '-d TYPE' options.
* Fixed device scan crash on missing '/proc/devices'.
* USB ID detection also for '/dev/sgN'.
* smartd: Could now run as systemd service with 'Type=notify' set.
- Drop upstreamed patches:
* smartmontools-scsiata-scsi_only.patch
* smartmontools-systemd-no-syslog.patch
- Update smartmontools-drivedb.h to the latest version from the
upstream branch RELEASE_7_0_DRIVEDB.
-------------------------------------------------------------------
Tue Sep 25 19:52:10 CEST 2018 - sbrabec@suse.com
- Fix smartd.service EnvironmentFile (boo#1095662).
-------------------------------------------------------------------
Fri Jun 22 13:33:42 CEST 2018 - kukuk@suse.de
- Add smartd_generate_opts.path and smartd_generate_opts.service
to update smartd_opts if sysconfig is modified. Needed for
[FATE#325524].
-------------------------------------------------------------------
Tue Apr 17 22:33:03 CEST 2018 - sbrabec@suse.com
- Fix SUSE default of S.M.A.R.T. checks: really enable nightly
short tests (bsc#1073918).
-------------------------------------------------------------------
Thu Feb 8 19:49:07 CET 2018 - sbrabec@suse.com
- Make possible to disable broken SAT support by -d scsi+cciss,N
(bsc#1038271, smartmontools-scsiata-scsi_only.patch,
https://www.smartmontools.org/ticket/871).
- Update smartmontools.keyring.
-------------------------------------------------------------------
Mon Dec 18 04:03:10 UTC 2017 - avindra@opensuse.org
- update to 6.6 version (FATE#321901, FATE#322874)
- smartctl:
* -i' and '--identify': ATA ACS-4 and SATA 3.3 enhancements.
* Control ATA write cache through SCT Feature Control
with '-s wcache-sct,ata|on|off[,p]' and '-g wcache-sct'.
* Print ATA Pending Defects log with '-l defects'.
* '-s wcreorder,on|off': New persistent flag ',p'.
* '-s standby': Prevent temporary drive spinup.
* '-n POWERMODE': New parameter to set exit status.
* '-g security': ATA Security Level check fixed.
* '-l scttemp*': Print minimum supported ERC Time Limit.
* '-q noserial': Now also suppresses "SAS address" output.
* '-i': Print IEEE EUI-64 of NVMe namespace.
* '-c': Print NVMe 1.3 feature flags.
* '-A': Print NVMe 1.3 thermal temperature transition
statistic.
* '-g/s dsn': Get/set ATA DSN.
- smartd
* Uses also device identify information to detect for duplicate
devices.
* '-e dsn' directive: Set ATA DSN.
* Improved SCSI/SAS temperature logging.
* Silence emails and log messages on open errors of
'-d removable' devices.
* Exit on device open error unless '-q never' or '-d removable'
is specified (regression).
- update-smart-drivedb: Now authenticates downloaded file with GnuPG.
- update-smart-drivedb: New options '--trunk', '--no-verify' and
'--export-key'.
- Device type '-d intelliprop,N' for IntelliProp controllers.
- SCSI: Default timeout increased to 1 minute.
- HDD, SSD and USB additions to drive database.
- New smartmontools-* mailing list addresses.
- Man page formatting reworked.
- Linux:
* Uses SG_IO V4 API if supported.
* Devices behind hpsa driver are no longer detected as regular
SCSI devices.
- switch to new url
- drop upstreamed patches:
* smartmontools-scsi-suppress-no-temperature.patch
* smartmontools-scsi-temperature-check.patch
* smartmontools-log-scsi-temperature.patch
- regen smartmontools-drivedb.h
-------------------------------------------------------------------
Thu Nov 23 13:42:04 UTC 2017 - rbrown@suse.com
- Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468)
-------------------------------------------------------------------
Fri Jul 14 21:04:35 CEST 2017 - sbrabec@suse.com
- SCSI temperature error fixes (bsc#1047198,
smartmontools-scsi-suppress-no-temperature.patch,
smartmontools-scsi-temperature-check.patch,
smartmontools-log-scsi-temperature.patch).
-------------------------------------------------------------------
Mon Dec 19 14:49:48 CET 2016 - sbrabec@suse.com
- Drop systemd dependency on syslog.target (bsc#983938,
smartmontools-systemd-no-syslog.patch).
https://lists.opensuse.org/opensuse-packaging/2013-05/msg00102.html
-------------------------------------------------------------------
Wed Dec 7 14:57:37 CET 2016- aginies@suse.com
- update to 6.5 version
* Experimental support for NVMe devices on FreeBSD, Linux and Windows.
* smartctl '-i', '-c', '-H' and '-l error': NVMe support.
* smartctl '-l nvmelog': New option for NVMe.
* smartd.conf '-H', '-l error' and '-W': NVMe support.
* Optional NVMe device scanning support on Linux and Windows.
* configure option '--with-nvme-devicescan' to include NVMe in
default device scanning result.
* Device scanning now allows to specify multiple '-d TYPE' options.
* ATA: Added new POWER MODE values introduced in ATA ACS-2.
* ATA: SCT commands are no longer issued if ATA Security is locked.
* SCSI: LB provisioning improvements.
* SCSI: Fixed GLTSD bit set/cleared info messages.
* SCSI: Solid State media log page is no longer checked for tapes.
* SCSI: Improved handling when no tape cartridge in drive.
* SCSI: Workaround for buggy Seagate firmware.
* SAT: Improved heuristics to detect bogus sense data from SAT layer.
* smartd: Fixed crash on missing argument to '-s' directive.
update-smart-drivedb: Now uses HTTPS for download by default.
* update-smart-drivedb: New options to select URL and download tool.
* update-smart-drivedb: New download tool 'svn'.
* Drive database file now also includes the DEFAULT setting
for each attribute.
* HDD, SSD and USB additions to drive database.
* Various code changes suggested by Clang Static Analyser and Cppcheck.
- enable "--with-nvme-devicescan" option
- update smartmontools-drivedb.h file
- use --with-savestates, --with-attributelog, --docdir instead of old options
-------------------------------------------------------------------
Thu Jan 14 09:06:55 UTC 2016 - meissner@suse.com
- replaced keyring with 2015/2016 key.
pub rsa2048/0xDF0F1A49C4A4903A 2014-12-31 [expires: 2016-12-31]
Key fingerprint = F41F 01FC 0784 4958 4FFC CF57 DF0F 1A49 C4A4 903A
uid [ unkown] Smartmontools Signing Key (through 2016) <smartmontools-support@lists.sourceforge.net>
-------------------------------------------------------------------
Sun Jan 10 14:09:14 UTC 2016 - p.drouand@gmail.com
- Update to version 6.0.4
* Device type '-d usbprolific' for Prolific PL2571/277x USB bridges.
* SAT: Support for ATA registers returned in fixed format sense data.
* smartctl '-i' and '--identify': ATA ACS-4 and SATA 3.2 enhancements.
* smartctl '-l xerror': Support for logs with more than 255 pages.
* smartctl '-l devstat': Prints ACS-3 DSN flags.
* smartctl '-l devstat': Read via SMART command if GP log is not
available.
* smartctl '-l scttempsts': Prints SCT SMART STATUS (ACS-4) and
vendor specific SCT bytes.
* HDD, SSD and USB additions to drive database.
* Linux: AACRAID fixes, SMART STATUS should work now.
* Linux: '/dev/megaraid_sas_ioctl_node' fd leak fix.
- Update smartmontools-drivedb.h to the latest version from the
upstream branch RELEASE_6_4_DRIVEDB.
- Cleanup and remove conditional macros; the package doesn't build
for SLE anyway
- Remove smartmontools-default-enabled.patch; not needed anymore
-------------------------------------------------------------------
Tue Mar 10 14:49:55 CET 2015 - sbrabec@suse.cz
- Run Self Tests:
* Short Self Test every night
* Extended Self Test every month
* Discussion:
http://lists.opensuse.org/opensuse-factory/2015-03/msg00040.html
- Dropped smartmontools-removable.patch
- Created smartmontools-suse-default.patch
-------------------------------------------------------------------
Mon Mar 9 17:29:15 CET 2015 - sbrabec@suse.cz
- Package empty /etc/smartd_warning.d for warning plugins.
- smartmontools-drivedb_h-update.sh: Fix default branch name.
- Comment fixes.
-------------------------------------------------------------------
Tue Mar 3 17:35:15 CET 2015 - sbrabec@suse.cz
- Improve drivedb.h update scriptlets: Detect update across
branches.
- Check state of smartmontools-drivedb.h in %prep.
- Add ghost records for files created by update-smart-drivedb.
- Improve smartmontools-drivedb_h-update.sh script: Perform spec
file changess.
- Clean up on uninstall.
- Update smartmontools-drivedb.h to the latest version from the
upstream branch RELEASE_6_3_DRIVEDB.
-------------------------------------------------------------------
Fri Nov 14 09:19:11 UTC 2014 - dimstar@opensuse.org
- No longer perform gpg validation; osc source_validator does it
implicit:
+ Drop gpg-offline BuildRequires.
+ No longer execute gpg_verify.
-------------------------------------------------------------------
Tue Oct 7 22:55:04 CEST 2014 - sbrabec@suse.cz
- Re-add /usr/sbin/rcsmards symlink (bnc#900099).
- Fix service restart in smartmontools.generate_smartd_opts.in
(bnc#900099).
-------------------------------------------------------------------
Wed Sep 3 13:27:11 CEST 2014 - ro@suse.de
- re-add sysvinit support in specfile (fix build on sles11)
-------------------------------------------------------------------
Wed Sep 3 13:01:54 CEST 2014 - ro@suse.de
- update to version 6.3
- smartctl: Fixed bogus error messages from '-g/-s wcreorder'.
- smartctl prints ATA form factor.
- SCSI: Improved support of modern disks (SAS SSDs).
- SCSI: Fixed sense data noise from old disks.
- update-smart-drivedb man page.
- configure option '--with-smartdscriptdir'.
- configure option '--with-smartdplugindir'.
- configure option '--with-systemdenvfile'.
- configure option '--with-working-snprintf'.
- Removed build time stamps to support reproducible builds.
- Compile fixes for C++11.
- HDD, SSD and USB additions to drive database.
- Linux: Support for controllers behind AACRAID driver.
- Linux: Fixed DEVICESCAN max path count.
- FreeBSD: Fixed possible crash caused by wrong SCSI error handling.
- FreeBSD: Compile fix for kFreeBSD.
- Windows: Reworked CSMI port scanning.
- QNX: Compile fix.
- dropped patches:
smartmontools-nobuild-date.patch (code removed upstream)
-------------------------------------------------------------------
Mon May 26 15:26:24 UTC 2014 - crrodriguez@opensuse.org
- Build with large file support in 32 bit systems.
-------------------------------------------------------------------
Thu Dec 5 18:52:44 UTC 2013 - sbrabec@suse.com
- Add supplementary drivedb.h update script
(smartmontools-drivedb_h-update.sh, bnc#851276).
- Skip drivedb.h verification by rpm -V (bnc#851276).
- Implement intelligent drivedb.h update not overwriting newer
drivedb.h releases.
- Update smartmontools-drivedb.h to the latest version from the
upstream branch trunk.
-------------------------------------------------------------------
Mon Jul 29 18:12:00 CEST 2013 - sbrabec@suse.cz
- Update to version 6.2:
* smartctl: Added ATA write cache reordering control using
'-g wcreorder' and '-s wcreorder,[on|off]' options.
* update-smart-drivedb: Updated for new SVN repository.
* HDD, SSD and USB additions to drive database.
* Areca RAID support: Fixed possible segfault on empty port.
* HPT RAID support: Maximum disk number increased to 128.
-------------------------------------------------------------------
Fri Apr 5 11:24:43 UTC 2013 - idonmez@suse.com
- Add Source URL, see https://en.opensuse.org/SourceUrls
-------------------------------------------------------------------
Wed Apr 3 23:53:45 UTC 2013 - crrodriguez@opensuse.org
- remove all sysvinit support.
-------------------------------------------------------------------
Mon Mar 18 18:28:10 CET 2013 - sbrabec@suse.cz
- Update to version 6.1:
* smartctl -l improved.
* smartctl -s/-g wcache and rcache for SCSI devices.
* smartctl prints more info for ATA and SCSI devices.
* smartctl '--identify' updated for latest ATA ACS-3 spec.
* smartd runs /etc/smartd_warning.sh to generate warning emails.
* smartd '-w PATH' option to specify this executable.
* smartd '-d ignore' directive.
* smartd DEVICESCAN ignores devices already specified.
* smartd: added support for -s and -A for SCSI devices.
* smartd '-W' directive uses ATA attribute 190 if 194 is missing.
* Support of larger SCSI defect lists via READ DEFECT(12).
* Device type '-d usbjmicron,p' for Prolific USB bridges.
* Many HDD, SSD and USB additions to drive database.
* Support for SAS disks behind Areca controllers.
* Improved support for SATA disks on LSI/Megaraid controllers.
* Disks on MegaRaid controllers are automatically scanned.
- smartmontools.keyring: New signing key for the next 2 years.
-------------------------------------------------------------------
Wed Dec 12 19:47:57 CET 2012 - sbrabec@suse.cz
- Use sysconfig variables (sed on smartd.service.in) and generate
smartd_opts for systemd smartd.service.
- Remove obsolete parsing of /etc/default/smartmontools
(it is no more in upstream installation).
-------------------------------------------------------------------
Thu Nov 29 19:09:35 CET 2012 - sbrabec@suse.cz
- Verify GPG signature.
-------------------------------------------------------------------
Tue Nov 20 19:19:59 CET 2012 - sbrabec@suse.cz
- Re-introduce smartmontools-sysconfig.patch with
SMARTD_SAVESTATES, SMARTD_ATTRLOG and SMARTD_EXTRA_OPTS sysconfig
variables (bnc#790044).
-------------------------------------------------------------------
Thu Nov 15 17:10:02 CET 2012 - sbrabec@suse.cz
- Update to version 6.0 (bnc#789204):
* option/directive '-F nologdir' and '-F xerrorlba'.
* smartctl '--identify' option.
* smartctl prints nominal media rotation rate (ATA).
* smartctl prints SATA version and speed.
* smartctl '-l sataphy' works for CD/DVD drives also.
* smartctl '-x' includes ATA Device Statistics.
* smartd warning emails include device identify info.
* smartd '-d' output is flushed to support redirection.
* Many HDD, SSD and USB additions to drive database.
* smartctl options '-g, --get' and '-s, --set' to get/set various
ATA settings: AAM, APM, Read look-ahead, Write cache, Security
(freeze), Standby mode/timer.
* smartd directive '-e' to set (most of) the above settings on
startup.
* smartctl options '-f hex' and '-f hex,[id|val]'.
* smartctl does not start ATA self-test if another test is
already running. Override with new option '-t force'.
* smartctl supports extended self-test polling times greater
than 255 minutes.
* Controller-independent SAT detection: '-d sat,auto[+TYPE]'.
* smartd.conf DEFAULT directive.
* Support for SATA disks behind Areca SAS RAID controllers and
HP Smart Array controllers.
-------------------------------------------------------------------
Tue Nov 6 14:30:35 UTC 2012 - coolo@suse.com
- do no longer require syslog on 12.3, journal is enough for
some installations
-------------------------------------------------------------------
Tue Sep 11 14:25:07 UTC 2012 - coolo@suse.com
- buildrequire systemd to have working rpm macros
-------------------------------------------------------------------
Thu May 31 20:25:44 UTC 2012 - sweet_f_a@gmx.de
- update to the _latest_ smartmontools-5.42 tarball, see
http://sourceforge.net/mailarchive/message.php?msg_id=28262364
"The PKG_PROG_PKG_CONFIG macro was not expanded in configure"
- remove automake dependency
-------------------------------------------------------------------
Tue Feb 21 19:32:51 CET 2012 - sbrabec@suse.cz
- Disable PIE for SLE9.
-------------------------------------------------------------------
Wed Nov 30 10:23:56 UTC 2011 - coolo@suse.com
- add automake as buildrequire to avoid implicit dependency
-------------------------------------------------------------------
Tue Nov 22 21:30:08 UTC 2011 - crrodriguez@opensuse.org
- When in a virtualized envirnment, hard disk monitoring
with smartd is a task for the host, make systemd to skip
the service if found running in such setup.
-------------------------------------------------------------------
Fri Oct 21 15:54:22 CEST 2011 - sbrabec@suse.cz
- Upgrade to version 5.42 (bnc#725631):
* smartctl option '-l devstat' (Device Statistics).
* smartctl option '-l ssd' (SSD endurance indicator).
* smartd logs identify information of each SCSI/SAS device.
* smartd resends warning emails if problem reappears.
* smartd directives '-l offlinests' and '-l selfteststs'.
* Many HDD, SSD and USB additions to drive database.
* Platform-specific man pages.
* smartd.8 man page no longer includes smartd.conf.5.
* Support for Areca controllers enhanced.
- Fixed pid file location (bnc#714647).
-------------------------------------------------------------------
Mon Oct 10 14:24:33 UTC 2011 - bruno@ioda-net.ch
- reuse of %makeinstall to build for SLES11_SP1-
-------------------------------------------------------------------
Sun Oct 9 17:17:45 UTC 2011 - bruno@ioda-net.ch
- upgrade to 5.41 Date 2011-06-09
- Failed self-tests outdated by a newer successful extended
self-test are no longer reported as errors.
- Support for ATA Long Logical/Physical Sectors (LLS/LPS).
- 'smartctl --scan-open' can create a draft smartd.conf.
- smartctl prints World Wide Name (WWN) of ATA device.
- smartctl option '-f brief' to select new attribute output
format which includes more flags and fits in 80 columns.
- smartd logs identify information and WWN of each ATA device.
- smartd logs warning from drive database if present.
- smartd logs changes of offline data collection status.
- smartd directive '-l scterc,READTIME,WRITETIME'.
- smartd preserves last scheduled selective self-tests span.
- 'smartd.service' file for systemd.
- configure option '--with-systemdsystemunitdir'
- configure option '--with-exampledir'.
- configure searches for init.d or rc.d directory.
- 'make install' does no longer overwrite an existing
smartd.conf file.
- 'update-smart-drivedb' does no longer require GNU sed.
- Many HDD, SSD and USB additions to drive database.
- Linux USB autodetection: Enable '-d sat,16' for newer kernels.
- Linux megaraid: Fix segfault on non-data SCSI commands.
- Linux megaraid: Fix pass-through of non-data ATA commands.
- clean up old patches included in upstream
- added systemd upstream configure option
- added patch for FSF-address
- clean up spec with spec-cleaner-
-------------------------------------------------------------------
Wed Jun 8 20:17:25 CEST 2011 - sbrabec@suse.cz
- Added sysconfig options to set arbitrary smartd options and
disable persistent state writes and attribute log (FATE#310460).
- Decrease log message on unsupported state writes to DEBUG
(FATE#310460).
- Change sysconfig ServiceReload to ServiceRestart, otherwise
sysconfig changes will not take effect until restart.
-------------------------------------------------------------------
Mon Mar 21 16:48:36 UTC 2011 - coolo@novell.com
- licenses package is about to die
-------------------------------------------------------------------
Thu Feb 3 17:22:27 CET 2011 - pgajdos@suse.cz
- fixed smartctl -V command to show version [bnc#647521]
* modified nobuild-date.patch
-------------------------------------------------------------------
Thu Jan 13 16:03:00 CET 2011 - sbrabec@suse.cz
- Removed support for SLE9 and older.
-------------------------------------------------------------------
Tue Dec 7 21:39:33 UTC 2010 - coolo@novell.com
- prereq init script syslog
-------------------------------------------------------------------
Thu Oct 21 18:29:39 CEST 2010 - ro@suse.de
- update to final 5.40
- configure: '--enable-drivedb' is now the default.
- Improved support for Intel SSDs.
- Improved support for SandForce based SSDs.
- Many additions to drive database.
- smartctl option '-t vendor,N'.
- Linux: Support SATA drives on LSI 3ware 9750 controllers.
- Fix regression in smartd SMARTD_DEVICE and SMARTD_DEVICETYPE
environment variables.
-------------------------------------------------------------------
Wed Oct 6 16:55:28 CEST 2010 - sbrabec@suse.cz
- Added rpmlintrc.
- Removed Obsoletes for ancient packages.
- Enabled attribute log.
-------------------------------------------------------------------
Tue Sep 28 17:20:37 UTC 2010 - cristian.rodriguez@opensuse.org
- Fix patch to remove build Dates
- Update to a newer version of 5.39.1 branch in order
to support libcap-ng so smartd can drop privileges
-------------------------------------------------------------------
Sun Aug 29 18:56:43 UTC 2010 - cristian.rodriguez@opensuse.org
- Do not include build enviroment infon in the binaries
including date and time of compilation, makes build-compare
happier.
-------------------------------------------------------------------
Mon Jun 28 06:38:35 UTC 2010 - jengelh@medozas.de
- use %_smp_mflags
-------------------------------------------------------------------
Wed Feb 10 15:26:37 CET 2010 - sbrabec@suse.cz
- Updated to version 5.39.1:
* Fix regression in smartctl option '-q, --quietmode'.
* Fix regression in smartd directive '-l selftest'.
* Linux: Allow smartd 'DEVICESCAN -d sat'.
* Linux: Fix spin-up of SATA drive if '-n standby' is used
(bnc#576662).
* Support for up to 128 devices on 3ware controllers
* smartctl option '-l xerror' to print ATA SMART Extended
Comprehensive Error Log
* Option '-d sat+TYPE' to use SAT with controllers which require
'-d TYPE'
* Option '-v ID,RAW_FORMAT,ATTR_NAME' to add new vendor specific
attributes
* Support for SSD drives using 64-bit raw attributes
* Many additions to drive database
* New simplified syntax for drive database
* Configure option to add drive database file to distribution
* smartd can now handle attributes 197 and 198 with increasing
raw values
* smartd logs changes of self-test execution status
* smartd directive '-n powermode,N' to limit the number of
skipped checks
* smartd flag '!' for '-r' and '-R' directives to log changes as
critical
* Self-tests scheduled during system downtime or disk standby are
run after next startup (bnc#469859).
* smartd option '-s PREFIX' to store smartd internal state until
next startup
* smartd option '-A PREFIX' to log attributes at each check cycle
* Configure options to enable the above by default
* Change to an object oriented interface to access ATA and SCSI
devices
* Modules migrated to new interface
* Rework of smartd data structures
* Checkin date and SVN revision and optional BUILD_INFO printed
in version info
* SELinux fixes to 3ware device node creation
* Use getaddrinfo() instead of gethostbyname() to support IPv6
* Additional support for Samsung MLC flash drives
-------------------------------------------------------------------
Tue Feb 9 18:40:31 CET 2010 - sbrabec@suse.cz
- Changed daemon start policy from "force yes" to "default start"
(bnc#567416).
-------------------------------------------------------------------
Mon Aug 10 19:07:54 CEST 2009 - sbrabec@suse.cz
- Updated to the latest SVN snapshot:
* More drives recognized: Fujitsu MHW2 BJ series, WD Caviar Black
family, Western Digital AV-GP series, Transcend Solid-State
Drive and Transcend Solid-State Drive V series, Seagate
Momentus 5400.5 series.
* Fix data type bug in checksum test for multi sector logs.
* Add USB ID of Seagate FreeAgent Go.
* Add experimental feature to log attribute values at each check
cycle (ATA only).
* Heads up about a non backwardly compatible change introduced in
draft SAT-2 (sat2r8b.pdf) that will break our existing SAT
processing code. Action needed if change stands.
* smartctl: Don't report an attribute as failed if threshold is
0.
* Print only one warning on checksum errors in multi sector log.
* Require to specify PORT parameter of '-d usbjmicron' if two
disks are connected.
* smartctl: Limit default number of printed entries for '-l
xerror' to 8, for '-l xselftest' to 25.
* smartctl: Fix number of entries in '-l xselftest' output.
* Add USB IDs of a SunplusIT bridge, three WD drives, and an
unsupported Iomega drive.
* smartd: Add '!' flag to '-r' and '-R' directives. If specified,
message is logged as LOG_CRIT and warning mail is sent if
attribute normalized or raw value changes.
* Add names for some attributes used in Samsung MLC drives:
178-180 & 183
* smartctl: Add option '-x, --xall' to print all info including
extended SMART logs and non-SMART info.
* smartctl: Add '-l xerror,error' and '-l xselftest,selftest' to
print the old logs if the extended logs are not supported.
* Disable 48-bit ATA commands for JMicron USB bridges by default.
* smartd: Don't ignore the '-n' directive when a self-test is
scheduled.
* SCSI (SAS): implement '-l sasphy,reset'.
* SCSI (SAS): add '-l sasphy' and '-l sasphy,reset' into smartctl.
* Print General Purpose Logs even if GPL feature bit is missing.
-------------------------------------------------------------------
Sat Jul 18 20:22:38 CEST 2009 - dominique-obs@leuenberger.net
- bootstrap with automake-1.11
-------------------------------------------------------------------
Wed Jun 3 19:19:55 CEST 2009 - sbrabec@suse.cz
- Updated to the latest CVS snapshot:
* SCSI: Fetch load-unload cycle counts
* smartd: Fix '-M test' directive in conjunction with '-s'
* knowndrives updates
* Add '+' modifier to smartd '-C' and '-U' directives
* Add experimental option '-d usbsunplus' for drives behind
SunplusIT USB bridges.
* Add smartctl '-d test' option
* Add experimental USB device type autodetection
* Add new SMART STATUS check command for JMicron USB bridges
* Add smartctl option '-l xerror[,NUM]'
* Accept half healthy (and half unhealthy) indication from the
SMART RETURN STATUS.
* Workaround for huge raw values of Reallocated_Sector_Ct and
Reallocated_Event_Ct for newer Fujitsu disks.
-------------------------------------------------------------------
Wed Feb 11 17:01:58 CET 2009 - sbrabec@suse.cz
- Enabled selinux support only for supported platforms.
- Removed support for SLE9 (no more compilable).
-------------------------------------------------------------------
Thu Nov 27 14:35:11 CET 2008 - sbrabec@suse.cz
- smartd_opts migrated to sysconfig (bnc#448205).
-------------------------------------------------------------------
Fri Oct 24 18:12:18 CEST 2008 - sbrabec@suse.cz
- Updated to the latest CVS snapshot:
* DEVICESCAN works again with SATA (bnc#436567)
* knowndrives updates, now using full regexps
* support for local drive database entries from optional file
* support for scheduled self tests
* smartd persistent state and delayed test scheduling support
* support for disks behind MegaRAID controllers
* Improve min/max temperature recording in conjunction with '-s'.
* new options to -l
* code cleanup and other fixes
- Init script updated to support "unused" state (bnc#436567).
- Added "rescan" to the init script to force rescanning of devices.
- Enabled selinux support to create /dev/tw[ae] with correct
contexts.
-------------------------------------------------------------------
Tue Sep 2 14:44:40 CEST 2008 - sbrabec@suse.cz
- Desktop neutral powersave-notify is no longer available.
Use "wall" to report expected disc failures.
-------------------------------------------------------------------
Mon Aug 18 17:26:44 CEST 2008 - sbrabec@suse.cz
- Updated to the latest CVS snapshot:
* Areca device support.
* More discs recognized.
* Code improvements to simplify adding new platforms and devices.
-------------------------------------------------------------------
Fri May 23 14:06:32 CEST 2008 - sbrabec@suse.cz
- Updated to the latest CVS snapshot:
* USB Cypress device support in smartd (bnc#387094).
- Fixed help strings regarding the USB Cypress support.
- Do not report errors after disconnecting of removable discs
(bnc#308557).
-------------------------------------------------------------------
Tue May 6 12:43:16 CEST 2008 - sbrabec@suse.cz
- Updated to the latest CVS snapshot (bnc#387094):
* USB Cypress device support.
* 3ware support improvements.
-------------------------------------------------------------------
Mon Mar 10 12:42:15 CET 2008 - sbrabec@suse.cz
- Updated to version 5.38:
* smartd.initd.in addition
* On Linux, DEVICESCAN now automatically recognizes SATA devices
behind libata, and SATA devices behind the Marvell driver.
* On Linux, a '-d sat' or '-d marvell' is automatically added
if libata or the marvell driver are recognized behind a SCSI
device type
* SAT device type + SCSI generic devices work properly with
smartd under Linux
* Many additions to drive database
* Some ATA-8 updates
* Dragonfly support
* Fixed some ATA identity byte swap problems on big endian CPUs
* No-fork option added to smartd
* 3ware support for controllers with more disks (32 max)
* Improved SMART Attribute list and descriptions
* Fix to smartctl return codes
* Fix to scheduled tests on Highpoint RAID controllers
* New samsung firmware bug workaround option
* Auto-offline and Auto-save fixed in Linux + libata
* Solaris: better SCSI support
* Fixed and improvements to CCISS support
* More options for SCSI temperature monitoring and history
* Additional command line options for selective self-tests
* Compilation fixes for various platforms.
-------------------------------------------------------------------
Tue Oct 9 11:46:01 CEST 2007 - sbrabec@suse.cz
- Updated to the CVS version (#326738):
* Supports SAS discs behind CCISS RAID.
- Removed bogus patch breaking HighPoint RAID (#225639).
-------------------------------------------------------------------
Wed Aug 22 13:14:42 CEST 2007 - sbrabec@suse.cz
- Worked around missing %restart_on_update in older versions.
- Build correctly in older SuSE versions.
-------------------------------------------------------------------
Tue Jul 24 18:34:34 CEST 2007 - sbrabec@suse.cz
- Updated to version 5.37:
* Rely on general SAT code instead of Linux specific.
* Increased max line length 128 to 256 characters.
* Added new items into drive database.
* Fixed inclusion of PRI?64 macros from inttypes.h.
* Fix selective self test log revision number.
* Compile fix for SuSE.
- Really start smartd by default on new enough kernels (#201715).
- Fixed behavior for SATA discs (#225639).
-------------------------------------------------------------------
Mon Mar 5 11:54:35 CET 2007 - pgajdos@suse.cz
- fixed 'array subscript is above array bounds' (#239956)
-------------------------------------------------------------------
Mon Jan 22 10:33:05 CET 2007 - ssommer@suse.de
- fix build for automake-0.9b
-------------------------------------------------------------------
Thu Jan 18 15:09:45 CET 2007 - ssommer@suse.de
- support building with automake-1.10
-------------------------------------------------------------------
Wed Oct 25 12:11:17 CEST 2006 - sbrabec@suse.cz
- Updated to the today CVS version:
* Supports SATA devices scanning out of the box (#201715#c9).
* Supports SATA devices behind SCSI ATA Translation layer.
* Supports SATA drives behind HighPoint Raid controllers.
* Supports HP SmartArray RAID controller (cciss) (#186013).
- Updated SATA support stuff.
- Start smartd by default on new enough kernels (#201715).
-------------------------------------------------------------------
Wed Sep 13 17:56:12 CEST 2006 - sbrabec@suse.cz
- Integrated with powersave.
- Use upstream init script.
-------------------------------------------------------------------
Thu Sep 7 17:24:49 CEST 2006 - sbrabec@suse.cz
- Updated to version 5.36:
* Additions to the table of known drives.
* Works 'out of the box' with Linux SATA libata.
* smartd option added to list test schedules.
* smartctl option added to list part of drive database.
* Various improvements for SCSI disks and logs.
* Printing of drive family info.
* SCSI disks: output size of grown defect list.
* Added info about drive family to 'smartctl -i' output.
* Added option ',q' for smartd '-n' directive to suppress
'skipping checks' message which may spin up laptop disk.
* Added message if smartd '-n' check power mode spins up disk.
-------------------------------------------------------------------
Wed Jan 25 21:41:41 CET 2006 - mls@suse.de
- converted neededforbuild to BuildRequires
-------------------------------------------------------------------
Tue Jun 21 01:17:39 CEST 2005 - ro@suse.de
- use RPM_OPT_FLAGS
- build with fPIE/pie
-------------------------------------------------------------------
Fri Mar 18 14:49:58 CET 2005 - sbrabec@suse.cz
- Additional information on SATA support.
-------------------------------------------------------------------
Tue Feb 22 14:18:47 CET 2005 - sbrabec@suse.cz
- Added comments on temperature data in smartd.conf (#50156).
-------------------------------------------------------------------
Mon Jan 24 16:30:15 CET 2005 - sbrabec@suse.cz
- Updated to version 5.33.
-------------------------------------------------------------------
Mon Jan 03 15:14:31 CET 2005 - sbrabec@suse.cz
- Fixed missing pid reference in init script (#49546).
- Updated README.SATA.
-------------------------------------------------------------------
Fri Aug 27 15:25:36 CEST 2004 - sbrabec@suse.cz
- Updated to version 5.32.
-------------------------------------------------------------------
Sun Jun 6 13:23:35 CEST 2004 - lmuelle@suse.de
- Update to version 5.31.
- Add stop_on_removal to preun and restart_on_update to postun.
-------------------------------------------------------------------
Sun Apr 25 16:40:02 CEST 2004 - lmuelle@suse.de
- Add reload and condrestart to init script; [#39425].
-------------------------------------------------------------------
Mon Mar 08 11:46:56 CET 2004 - sbrabec@suse.cz
- Updated to version 5.30.
-------------------------------------------------------------------
Fri Mar 05 17:26:02 CET 2004 - sbrabec@suse.cz
- Added README.SATA.
- Added %build section.
-------------------------------------------------------------------
Tue Mar 02 11:09:18 CET 2004 - sbrabec@suse.cz
- Updated to version 5.29.
-------------------------------------------------------------------
Mon Jan 12 10:50:27 CET 2004 - adrian@suse.de
- build as user
-------------------------------------------------------------------
Fri Jan 9 20:11:08 CET 2004 - mmj@suse.de
- Updated to version 5.26
-------------------------------------------------------------------
Fri Aug 22 13:20:40 CEST 2003 - sbrabec@suse.cz
- Updated to version 5.1-18.
-------------------------------------------------------------------
Thu Aug 21 17:14:08 CEST 2003 - sbrabec@suse.cz
- Updated to version 5.1-17.
-------------------------------------------------------------------
Mon Aug 11 09:53:05 CEST 2003 - sbrabec@suse.cz
- Added $sendmail to X-UnitedLinux-Should-Start.
-------------------------------------------------------------------
Thu Aug 07 14:45:17 CEST 2003 - sbrabec@suse.cz
- Updated to version 5.1.16.
-------------------------------------------------------------------
Wed May 21 11:59:42 CEST 2003 - sbrabec@suse.cz
- Updated to version 5.1.9.
- Fixed RPM file attributes.
-------------------------------------------------------------------
Wed Mar 26 12:33:38 CET 2003 - sbrabec@suse.cz
- Updated to version 5.1.9.
-------------------------------------------------------------------
Mon Jan 27 11:08:57 CET 2003 - sbrabec@suse.cz
- Updated to version 5.1.4.
-------------------------------------------------------------------
Mon Jan 13 16:06:59 CET 2003 - sbrabec@suse.cz
- Updated to version 5.1.1.
-------------------------------------------------------------------
Tue Dec 10 18:11:21 CET 2002 - sbrabec@suse.cz
- Updated to version 5.0.49.
-------------------------------------------------------------------
Mon Nov 25 14:01:29 CET 2002 - sbrabec@suse.cz
- Fixed SuSE specific things in docs and manual pages.
-------------------------------------------------------------------
Mon Nov 18 12:02:24 CET 2002 - sbrabec@suse.cz
- New package.