From: Heiner Kallweit <hkallweit1@gmail.com>
Date: Wed, 10 Jan 2018 21:21:31 +0100
Subject: net: phy: remove parameter new_link from phy_mac_interrupt()
Patch-mainline: v4.16-rc1
Git-commit: 28b2e0d2cd132284ad69fcea4b7cf6b7d0662c2f
References: bsc#1119113 FATE#326472
I see two issues with parameter new_link:
1. It's not needed. See also phy_interrupt(), works w/o this parameter.
phy_mac_interrupt sets the state to PHY_CHANGELINK and triggers the
state machine which then calls phy_read_status. And phy_read_status
updates the link state.
2. phy_mac_interrupt is used in interrupt context and getting the link
state may sleep (at least when having to access the PHY registers
via MDIO bus).
So let's remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 7 ++++---
drivers/net/phy/phy.c | 10 +++-------
include/linux/phy.h | 2 +-
3 files changed, 8 insertions(+), 11 deletions(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2536,9 +2536,10 @@ static void bcmgenet_irq_task(struct wor
spin_unlock_irqrestore(&priv->lock, flags);
/* Link UP/DOWN event */
- if (status & UMAC_IRQ_LINK_EVENT)
- phy_mac_interrupt(priv->phydev,
- !!(status & UMAC_IRQ_LINK_UP));
+ if (status & UMAC_IRQ_LINK_EVENT) {
+ priv->dev->phydev->link = !!(status & UMAC_IRQ_LINK_UP);
+ phy_mac_interrupt(priv->dev->phydev);
+ }
}
/* bcmgenet_isr1: handle Rx and Tx priority queues */
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1057,16 +1057,12 @@ void phy_state_machine(struct work_struc
/**
* phy_mac_interrupt - MAC says the link has changed
* @phydev: phy_device struct with changed link
- * @new_link: Link is Up/Down.
*
- * Description: The MAC layer is able indicate there has been a change
- * in the PHY link status. Set the new link status, and trigger the
- * state machine, work a work queue.
+ * The MAC layer is able to indicate there has been a change in the PHY link
+ * status. Trigger the state machine and work a work queue.
*/
-void phy_mac_interrupt(struct phy_device *phydev, int new_link)
+void phy_mac_interrupt(struct phy_device *phydev)
{
- phydev->link = new_link;
-
/* Trigger a state machine change */
queue_work(system_power_efficient_wq, &phydev->phy_queue);
}
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -961,7 +961,7 @@ int phy_drivers_register(struct phy_driv
void phy_state_machine(struct work_struct *work);
void phy_change(struct phy_device *phydev);
void phy_change_work(struct work_struct *work);
-void phy_mac_interrupt(struct phy_device *phydev, int new_link);
+void phy_mac_interrupt(struct phy_device *phydev);
void phy_start_machine(struct phy_device *phydev);
void phy_stop_machine(struct phy_device *phydev);
void phy_trigger_machine(struct phy_device *phydev, bool sync);