From: Andrey Smirnov <andrew.smirnov@gmail.com>
Date: Tue, 3 Sep 2019 19:35:04 -0700
Subject: crypto: caam - make sure clocks are enabled first
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Git-commit: 796114f5c5224c210127e5e62f915a76caad05cd
Patch-mainline: v5.4-rc1
References: jsc#SLE-16106

In order to access IP block's registers we need to enable appropriate
clocks first, otherwise we are risking hanging the CPU.

The problem becomes very apparent when trying to use CAAM driver built
as a kernel module. In that case caam_probe() gets called after
clk_disable_unused() which means all of the necessary clocks are
guaranteed to be disabled.

Coincidentally, this change also fixes iomap leak introduced by early
return (instead of "goto iounmap_ctrl") in commit
41fc54afae70 ("crypto: caam - simplfy clock initialization")

Tested on ZII i.MX6Q+ RDU2

Fixes: 176435ad2ac7 ("crypto: caam - defer probing until QMan is available")
Fixes: 41fc54afae70 ("crypto: caam - simplfy clock initialization")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 drivers/crypto/caam/ctrl.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
index 3c059d0e4207..db22777d59b4 100644
--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -594,6 +594,21 @@ static int caam_probe(struct platform_device *pdev)
 	dev_set_drvdata(dev, ctrlpriv);
 	nprop = pdev->dev.of_node;
 
+	imx_soc_match = soc_device_match(caam_imx_soc_table);
+	caam_imx = (bool)imx_soc_match;
+
+	if (imx_soc_match) {
+		if (!imx_soc_match->data) {
+			dev_err(dev, "No clock data provided for i.MX SoC");
+			return -EINVAL;
+		}
+
+		ret = init_clocks(dev, imx_soc_match->data);
+		if (ret)
+			return ret;
+	}
+
+
 	/* Get configuration properties from device tree */
 	/* First, get register page */
 	ctrl = of_iomap(nprop, 0);
@@ -604,9 +619,6 @@ static int caam_probe(struct platform_device *pdev)
 
 	caam_little_end = !(bool)(rd_reg32(&ctrl->perfmon.status) &
 				  (CSTA_PLEND | CSTA_ALT_PLEND));
-	imx_soc_match = soc_device_match(caam_imx_soc_table);
-	caam_imx = (bool)imx_soc_match;
-
 	comp_params = rd_reg32(&ctrl->perfmon.comp_parms_ms);
 	if (comp_params & CTPR_MS_PS && rd_reg32(&ctrl->mcr) & MCFGR_LONG_PTR)
 		caam_ptr_sz = sizeof(u64);
@@ -640,18 +652,6 @@ static int caam_probe(struct platform_device *pdev)
 	}
 #endif
 
-	if (imx_soc_match) {
-		if (!imx_soc_match->data) {
-			dev_err(dev, "No clock data provided for i.MX SoC");
-			return -EINVAL;
-		}
-
-		ret = init_clocks(dev, imx_soc_match->data);
-		if (ret)
-			return ret;
-	}
-
-
 	/* Allocating the BLOCK_OFFSET based on the supported page size on
 	 * the platform
 	 */