From: Richard Cochran <richardcochran@gmail.com>
Date: Wed, 25 Dec 2019 18:16:19 -0800
Subject: net: Introduce peer to peer one step PTP time stamping.
Patch-mainline: v5.6-rc1
Git-commit: b6fd7b96366769651ab23988607ce9c5c9042cdb
References: bsc#1176447

The 1588 standard defines one step operation for both Sync and
PDelay_Resp messages.  Up until now, hardware with P2P one step has
been rare, and kernel support was lacking.  This patch adds support of
the mode in anticipation of new hardware developments.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c   |    1 +
 drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c |    1 +
 drivers/net/ethernet/microchip/lan743x_ptp.c       |    3 +++
 drivers/net/ethernet/qlogic/qede/qede_ptp.c        |    1 +
 include/uapi/linux/net_tstamp.h                    |    8 ++++++++
 net/core/dev_ioctl.c                               |    1 +
 6 files changed, 15 insertions(+)

--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -15410,6 +15410,7 @@ int bnx2x_configure_ptp_filters(struct b
 		REG_WR(bp, rule, BNX2X_PTP_TX_ON_RULE_MASK);
 		break;
 	case HWTSTAMP_TX_ONESTEP_SYNC:
+	case HWTSTAMP_TX_ONESTEP_P2P:
 		BNX2X_ERR("One-step timestamping is not supported\n");
 		return -ERANGE;
 	}
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c
@@ -920,6 +920,7 @@ static int mlxsw_sp_ptp_get_message_type
 		egr_types = 0xff;
 		break;
 	case HWTSTAMP_TX_ONESTEP_SYNC:
+	case HWTSTAMP_TX_ONESTEP_P2P:
 		return -ERANGE;
 	}
 
--- a/drivers/net/ethernet/microchip/lan743x_ptp.c
+++ b/drivers/net/ethernet/microchip/lan743x_ptp.c
@@ -1148,6 +1148,9 @@ int lan743x_ptp_ioctl(struct net_device
 
 		lan743x_ptp_set_sync_ts_insert(adapter, true);
 		break;
+	case HWTSTAMP_TX_ONESTEP_P2P:
+		ret = -ERANGE;
+		break;
 	default:
 		netif_warn(adapter, drv, adapter->netdev,
 			   "  tx_type = %d, UNKNOWN\n", config.tx_type);
--- a/drivers/net/ethernet/qlogic/qede/qede_ptp.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_ptp.c
@@ -247,6 +247,7 @@ static int qede_ptp_cfg_filters(struct q
 		break;
 
 	case HWTSTAMP_TX_ONESTEP_SYNC:
+	case HWTSTAMP_TX_ONESTEP_P2P:
 		DP_ERR(edev, "One-step timestamping is not supported\n");
 		return -ERANGE;
 	}
--- a/include/uapi/linux/net_tstamp.h
+++ b/include/uapi/linux/net_tstamp.h
@@ -90,6 +90,14 @@ enum hwtstamp_tx_types {
 	 * queue.
 	 */
 	HWTSTAMP_TX_ONESTEP_SYNC,
+
+	/*
+	 * Same as HWTSTAMP_TX_ONESTEP_SYNC, but also enables time
+	 * stamp insertion directly into PDelay_Resp packets. In this
+	 * case, neither transmitted Sync nor PDelay_Resp packets will
+	 * receive a time stamp via the socket error queue.
+	 */
+	HWTSTAMP_TX_ONESTEP_P2P,
 };
 
 /* possible values for hwtstamp_config->rx_filter */
--- a/net/core/dev_ioctl.c
+++ b/net/core/dev_ioctl.c
@@ -187,6 +187,7 @@ static int net_hwtstamp_validate(struct
 	case HWTSTAMP_TX_OFF:
 	case HWTSTAMP_TX_ON:
 	case HWTSTAMP_TX_ONESTEP_SYNC:
+	case HWTSTAMP_TX_ONESTEP_P2P:
 		tx_type_valid = 1;
 		break;
 	}