From: Martin KaFai Lau <kafai@fb.com>
Date: Mon, 18 May 2020 17:13:34 -0700
Subject: net: inet_csk: Fix so_reuseport bind-address cache in tb->fast*
Git-commit: 88d7fcfa3b1fe670f0412b95be785aafca63352b
Patch-mainline: 5.7-rc7
References: networking-stable-20_05_27
The commit 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk")
added a bind-address cache in tb->fast*. The tb->fast* caches the address
of a sk which has successfully been binded with SO_REUSEPORT ON. The idea
is to avoid the expensive conflict search in inet_csk_bind_conflict().
There is an issue with wildcard matching where sk_reuseport_match() should
have returned false but it is currently returning true. It ends up
hiding bind conflict. For example,
bind("[::1]:443"); /* without SO_REUSEPORT. Succeed. */
bind("[::2]:443"); /* with SO_REUSEPORT. Succeed. */
bind("[::]:443"); /* with SO_REUSEPORT. Still Succeed where it shouldn't */
The last bind("[::]:443") with SO_REUSEPORT on should have failed because
it should have a conflict with the very first bind("[::1]:443") which
has SO_REUSEPORT off. However, the address "[::2]" is cached in
tb->fast* in the second bind. In the last bind, the sk_reuseport_match()
returns true because the binding sk's wildcard addr "[::]" matches with
the "[::2]" cached in tb->fast*.
The correct bind conflict is reported by removing the second
bind such that tb->fast* cache is not involved and forces the
bind("[::]:443") to go through the inet_csk_bind_conflict():
bind("[::1]:443"); /* without SO_REUSEPORT. Succeed. */
bind("[::]:443"); /* with SO_REUSEPORT. -EADDRINUSE */
The expected behavior for sk_reuseport_match() is, it should only allow
the "cached" tb->fast* address to be used as a wildcard match but not
the address of the binding sk. To do that, the current
"bool match_wildcard" arg is split into
"bool match_sk1_wildcard" and "bool match_sk2_wildcard".
This change only affects the sk_reuseport_match() which is only
used by inet_csk (e.g. TCP).
The other use cases are calling inet_rcv_saddr_equal() and
this patch makes it pass the same "match_wildcard" arg twice to
the "ipv[46]_rcv_saddr_equal(..., match_wildcard, match_wildcard)".
Cc: Josef Bacik <jbacik@fb.com>
Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
net/ipv4/inet_connection_sock.c | 43 ++++++++++++++++++++++------------------
1 file changed, 24 insertions(+), 19 deletions(-)
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -32,17 +32,19 @@ EXPORT_SYMBOL(inet_csk_timer_bug_msg);
#endif
#if IS_ENABLED(CONFIG_IPV6)
-/* match_wildcard == true: IPV6_ADDR_ANY equals to any IPv6 addresses if IPv6
- * only, and any IPv4 addresses if not IPv6 only
- * match_wildcard == false: addresses must be exactly the same, i.e.
- * IPV6_ADDR_ANY only equals to IPV6_ADDR_ANY,
- * and 0.0.0.0 equals to 0.0.0.0 only
+/* match_sk*_wildcard == true: IPV6_ADDR_ANY equals to any IPv6 addresses
+ * if IPv6 only, and any IPv4 addresses
+ * if not IPv6 only
+ * match_sk*_wildcard == false: addresses must be exactly the same, i.e.
+ * IPV6_ADDR_ANY only equals to IPV6_ADDR_ANY,
+ * and 0.0.0.0 equals to 0.0.0.0 only
*/
static int ipv6_rcv_saddr_equal(const struct in6_addr *sk1_rcv_saddr6,
const struct in6_addr *sk2_rcv_saddr6,
__be32 sk1_rcv_saddr, __be32 sk2_rcv_saddr,
bool sk1_ipv6only, bool sk2_ipv6only,
- bool match_wildcard)
+ bool match_sk1_wildcard,
+ bool match_sk2_wildcard)
{
int addr_type = ipv6_addr_type(sk1_rcv_saddr6);
int addr_type2 = sk2_rcv_saddr6 ? ipv6_addr_type(sk2_rcv_saddr6) : IPV6_ADDR_MAPPED;
@@ -52,8 +54,8 @@ static int ipv6_rcv_saddr_equal(const st
if (!sk2_ipv6only) {
if (sk1_rcv_saddr == sk2_rcv_saddr)
return 1;
- if (!sk1_rcv_saddr || !sk2_rcv_saddr)
- return match_wildcard;
+ return (match_sk1_wildcard && !sk1_rcv_saddr) ||
+ (match_sk2_wildcard && !sk2_rcv_saddr);
}
return 0;
}
@@ -61,11 +63,11 @@ static int ipv6_rcv_saddr_equal(const st
if (addr_type == IPV6_ADDR_ANY && addr_type2 == IPV6_ADDR_ANY)
return 1;
- if (addr_type2 == IPV6_ADDR_ANY && match_wildcard &&
+ if (addr_type2 == IPV6_ADDR_ANY && match_sk2_wildcard &&
!(sk2_ipv6only && addr_type == IPV6_ADDR_MAPPED))
return 1;
- if (addr_type == IPV6_ADDR_ANY && match_wildcard &&
+ if (addr_type == IPV6_ADDR_ANY && match_sk1_wildcard &&
!(sk1_ipv6only && addr_type2 == IPV6_ADDR_MAPPED))
return 1;
@@ -77,18 +79,19 @@ static int ipv6_rcv_saddr_equal(const st
}
#endif
-/* match_wildcard == true: 0.0.0.0 equals to any IPv4 addresses
- * match_wildcard == false: addresses must be exactly the same, i.e.
- * 0.0.0.0 only equals to 0.0.0.0
+/* match_sk*_wildcard == true: 0.0.0.0 equals to any IPv4 addresses
+ * match_sk*_wildcard == false: addresses must be exactly the same, i.e.
+ * 0.0.0.0 only equals to 0.0.0.0
*/
static int ipv4_rcv_saddr_equal(__be32 sk1_rcv_saddr, __be32 sk2_rcv_saddr,
- bool sk2_ipv6only, bool match_wildcard)
+ bool sk2_ipv6only, bool match_sk1_wildcard,
+ bool match_sk2_wildcard)
{
if (!sk2_ipv6only) {
if (sk1_rcv_saddr == sk2_rcv_saddr)
return 1;
- if (!sk1_rcv_saddr || !sk2_rcv_saddr)
- return match_wildcard;
+ return (match_sk1_wildcard && !sk1_rcv_saddr) ||
+ (match_sk2_wildcard && !sk2_rcv_saddr);
}
return 0;
}
@@ -104,10 +107,12 @@ int inet_rcv_saddr_equal(const struct so
sk2->sk_rcv_saddr,
ipv6_only_sock(sk),
ipv6_only_sock(sk2),
+ match_wildcard,
match_wildcard);
#endif
return ipv4_rcv_saddr_equal(sk->sk_rcv_saddr, sk2->sk_rcv_saddr,
- ipv6_only_sock(sk2), match_wildcard);
+ ipv6_only_sock(sk2), match_wildcard,
+ match_wildcard);
}
EXPORT_SYMBOL(inet_rcv_saddr_equal);
@@ -269,10 +274,10 @@ static inline int sk_reuseport_match(str
tb->fast_rcv_saddr,
sk->sk_rcv_saddr,
tb->fast_ipv6_only,
- ipv6_only_sock(sk), true);
+ ipv6_only_sock(sk), true, false);
#endif
return ipv4_rcv_saddr_equal(tb->fast_rcv_saddr, sk->sk_rcv_saddr,
- ipv6_only_sock(sk), true);
+ ipv6_only_sock(sk), true, false);
}
/* Obtain a reference to a local port for the given sock,