From: dillon min <dillon.minfei@gmail.com>
Date: Tue, 14 Jul 2020 14:35:07 +0800
Subject: ARM: dts: Fix dcan driver probe failed on am437x platform
Git-commit: 2a4117df9b436a0e4c79d211284ab2097bcd00dc
Patch-mainline: v5.8-rc6
References: git-fixes
Got following d_can probe errors with kernel 5.8-rc1 on am437x
[ 10.730822] CAN device driver interface
Starting Wait for Network to be Configured...
[ OK ] Reached target Network.
[ 10.787363] c_can_platform 481cc000.can: probe failed
[ 10.792484] c_can_platform: probe of 481cc000.can failed with error -2
[ 10.799457] c_can_platform 481d0000.can: probe failed
[ 10.804617] c_can_platform: probe of 481d0000.can failed with error -2
actually, Tony has fixed this issue on am335x with the patch [3]
Since am437x has the same clock structure with am335x
[1][2], so reuse the code from Tony Lindgren's patch [3] to fix it.
[1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
Integration
[2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
Integration
[3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on
am335x")
Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision")
Signed-off-by: dillon min <dillon.minfei@gmail.com>
[tony@atomide.com: aligned commit message a bit for readability]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Ivan T. Ivanov <iivanov@suse.de>
---
arch/arm/boot/dts/am437x-l4.dtsi | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -1578,8 +1578,9 @@
reg-names = "rev";
ti,hwmods = "d_can0";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
- clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
- clock-names = "fck";
+ clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>,
+ <&dcan0_fck>;
+ clock-names = "fck", "osc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xcc000 0x2000>;
@@ -1587,6 +1588,8 @@
dcan0: can@0 {
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
reg = <0x0 0x2000>;
+ clocks = <&dcan0_fck>;
+ clock-names = "fck";
syscon-raminit = <&scm_conf 0x644 0>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -1599,8 +1602,9 @@
reg-names = "rev";
ti,hwmods = "d_can1";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
- clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
- clock-names = "fck";
+ clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>,
+ <&dcan1_fck>;
+ clock-names = "fck", "osc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xd0000 0x2000>;
@@ -1608,6 +1612,8 @@
dcan1: can@0 {
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
reg = <0x0 0x2000>;
+ clocks = <&dcan1_fck>;
+ clock-name = "fck";
syscon-raminit = <&scm_conf 0x644 1>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";