From: Pablo Greco <pgreco@centosproject.org>
Date: Mon, 2 Nov 2020 11:19:14 -0300
Subject: ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator
Git-commit: bd5cdcdc66e1f7179ff6d172d1e5f55e43403aa8
Patch-mainline: v5.10
References: git-fixes

DCDC1 regulator powers many different subsystems. While some of them can
work at 3.0 V, some of them can not. For example, VCC-HDMI can only work
between 3.24 V and 3.36 V. According to OS images provided by the board
manufacturer this regulator should be set to 3.3 V.

Set DCDC1 and DCDC1SW to 3.3 V in order to fix this.

Fixes: 23edc168bd98 ("ARM: dts: sun8i: Add board dts file for Banana Pi M2 Berry")
Fixes: 27e81e1970a8 ("ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller")
Signed-off-by: Pablo Greco <pgreco@centosproject.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/1604326755-39742-1-git-send-email-pgreco@centosproject.org

Acked-by: Ivan T. Ivanov <iivanov@suse.de>
---
 arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -198,16 +198,16 @@
 };
 
 &reg_dc1sw {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
 	regulator-name = "vcc-gmac-phy";
 };
 
 &reg_dcdc1 {
 	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
 };
 
 &reg_dcdc2 {