From: James Smart <jsmart2021@gmail.com>
Date: Wed, 18 Dec 2019 15:58:01 -0800
Subject: [PATCH] scsi: lpfc: Fix missing check for CSF in Write Object Mbox
Git-commit: f3d0a8acc5a88435186d242376db05788a891516
Patch-mainline: v5.6-rc1
References: bsc#1156632,jsc#SLE-8654
Rsp
When the WriteObject mailbox response has change_status set to is 0x2
(Firmware Reset) or 0x04 (Port Migration Reset), the CSF field should also
be checked to see if a fw reset is sufficient to enable all new features in
the updated firmware image. If not, a fw reset would start the new
firmware, but with a feature level equal to existing firmware. To enable
the new features, a chip reset/pci slot reset would be required.
Check the CSF bit when change_status is 0x2 or 0x4 to know whether to
perform a pci bus reset or fw reset.
Link: https://lore.kernel.org/r/20191218235808.31922-4-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/lpfc/lpfc_hw4.h | 3 +++
drivers/scsi/lpfc/lpfc_sli.c | 12 +++++++++++-
2 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 25cdcbc2b02f..9a064b96e570 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -3925,6 +3925,9 @@ struct lpfc_mbx_wr_object {
#define LPFC_CHANGE_STATUS_FW_RESET 0x02
#define LPFC_CHANGE_STATUS_PORT_MIGRATION 0x04
#define LPFC_CHANGE_STATUS_PCI_RESET 0x05
+#define lpfc_wr_object_csf_SHIFT 8
+#define lpfc_wr_object_csf_MASK 0x00000001
+#define lpfc_wr_object_csf_WORD word5
} response;
} u;
};
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index c82b5792da98..12319f63cb45 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -19449,7 +19449,7 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
struct lpfc_mbx_wr_object *wr_object;
LPFC_MBOXQ_t *mbox;
int rc = 0, i = 0;
- uint32_t shdr_status, shdr_add_status, shdr_change_status;
+ uint32_t shdr_status, shdr_add_status, shdr_change_status, shdr_csf;
uint32_t mbox_tmo;
struct lpfc_dmabuf *dmabuf;
uint32_t written = 0;
@@ -19506,6 +19506,16 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
if (check_change_status) {
shdr_change_status = bf_get(lpfc_wr_object_change_status,
&wr_object->u.response);
+
+ if (shdr_change_status == LPFC_CHANGE_STATUS_FW_RESET ||
+ shdr_change_status == LPFC_CHANGE_STATUS_PORT_MIGRATION) {
+ shdr_csf = bf_get(lpfc_wr_object_csf,
+ &wr_object->u.response);
+ if (shdr_csf)
+ shdr_change_status =
+ LPFC_CHANGE_STATUS_PCI_RESET;
+ }
+
switch (shdr_change_status) {
case (LPFC_CHANGE_STATUS_PHYS_DEV_RESET):
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
--
2.16.4