From: Heiner Kallweit <hkallweit1@gmail.com>
Date: Sat, 21 Jul 2018 15:48:47 +0200
Subject: net: phy: add GBit master / slave error detection
Patch-mainline: v4.19-rc1
Git-commit: b8f8c8eb408b36ad55dd41a616b3f51998880fb6
References: bsc#1119113 FATE#326472
Certain PHY's have issues when operating in GBit slave mode and can
be forced to master mode. Examples are RTL8211C, also the Micrel PHY
driver has a DT setting to force master mode.
If two such chips are link partners the autonegotiation will fail.
Standard defines a self-clearing on read, latched-high bit to
indicate this error. Check this bit to inform the user.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/phy/phy_device.c | 8 ++++++++
include/uapi/linux/mii.h | 1 +
2 files changed, 9 insertions(+)
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1555,6 +1555,14 @@ int genphy_read_status(struct phy_device
if (adv < 0)
return adv;
+ if (lpagb & LPA_1000MSFAIL) {
+ if (adv & CTL1000_ENABLE_MASTER)
+ phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n");
+ else
+ phydev_err(phydev, "Master/Slave resolution failed\n");
+ return -ENOLINK;
+ }
+
phydev->lp_advertising =
mii_stat1000_to_ethtool_lpa_t(lpagb);
common_adv_gb = lpagb & adv << 2;
--- a/include/uapi/linux/mii.h
+++ b/include/uapi/linux/mii.h
@@ -135,6 +135,7 @@
#define CTL1000_ENABLE_MASTER 0x1000
/* 1000BASE-T Status register */
+#define LPA_1000MSFAIL 0x8000 /* Master/Slave resolution failure */
#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */
#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */
#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */