From 8fd03f9541c032d36c9d0836f23ac558bf3a7301 Mon Sep 17 00:00:00 2001
From: Voon Weifeng <weifeng.voon@intel.com>
Date: Tue, 31 Mar 2020 01:05:10 +0800
Subject: [PATCH 5/8] net: stmmac: create dwmac-intel.c to contain all Intel
platform
Git-commit: 58da0cfa6cf1200b81b65aef36dfa6130b577ef6
Patch-mainline: v5.7-rc1
References: bsc#1192691
As stmmac_pci.c file is getting bigger and more complex, it is reasonable
to separate all the Intel specific dwmac pci device to a different file.
This move includes Intel Quark, TGL and EHL. A new kernel config
CONFIG_DWMAC_INTEL is introduced and depends on X86. For this initial
patch, all the necessary function such as probe() and exit() are identical
besides the function name.
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Denis Kirjanov <denis.kirjanov@suse.com>
---
drivers/net/ethernet/stmicro/stmmac/Kconfig | 9 +
drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 507 ++++++++++++++++++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 317 +-------------
4 files changed, 524 insertions(+), 310 deletions(-)
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 2325b40dff6e..0f8a0d0e6362 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -197,6 +197,15 @@ config DWMAC_SUN8I
EMAC ethernet controller.
endif
+config DWMAC_INTEL
+ tristate "Intel GMAC support"
+ default X86
+ depends on X86 && STMMAC_ETH && PCI
+ depends on COMMON_CLK
+ ---help---
+ This selects the Intel platform specific bus support for the
+ stmmac driver. This driver is used for Intel Quark/EHL/TGL.
+
config STMMAC_PCI
tristate "STMMAC PCI bus support"
depends on STMMAC_ETH && PCI
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index c59926d96bcc..5a6f265bc540 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -30,5 +30,6 @@ obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o
stmmac-platform-objs:= stmmac_platform.o
dwmac-altr-socfpga-objs := altr_tse_pcs.o dwmac-socfpga.o
+obj-$(CONFIG_DWMAC_INTEL) += dwmac-intel.o
obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o
stmmac-pci-objs:= stmmac_pci.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
new file mode 100644
index 000000000000..ade17cfc9fa1
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -0,0 +1,507 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2020, Intel Corporation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/pci.h>
+#include <linux/dmi.h>
+#include "stmmac.h"
+
+/* This struct is used to associate PCI Function of MAC controller on a board,
+ * discovered via DMI, with the address of PHY connected to the MAC. The
+ * negative value of the address means that MAC controller is not connected
+ * with PHY.
+ */
+struct stmmac_pci_func_data {
+ unsigned int func;
+ int phy_addr;
+};
+
+struct stmmac_pci_dmi_data {
+ const struct stmmac_pci_func_data *func;
+ size_t nfuncs;
+};
+
+struct stmmac_pci_info {
+ int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
+};
+
+static int stmmac_pci_find_phy_addr(struct pci_dev *pdev,
+ const struct dmi_system_id *dmi_list)
+{
+ const struct stmmac_pci_func_data *func_data;
+ const struct stmmac_pci_dmi_data *dmi_data;
+ const struct dmi_system_id *dmi_id;
+ int func = PCI_FUNC(pdev->devfn);
+ size_t n;
+
+ dmi_id = dmi_first_match(dmi_list);
+ if (!dmi_id)
+ return -ENODEV;
+
+ dmi_data = dmi_id->driver_data;
+ func_data = dmi_data->func;
+
+ for (n = 0; n < dmi_data->nfuncs; n++, func_data++)
+ if (func_data->func == func)
+ return func_data->phy_addr;
+
+ return -ENODEV;
+}
+
+static void common_default_data(struct plat_stmmacenet_data *plat)
+{
+ plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
+ plat->has_gmac = 1;
+ plat->force_sf_dma_mode = 1;
+
+ plat->mdio_bus_data->needs_reset = true;
+
+ /* Set default value for multicast hash bins */
+ plat->multicast_filter_bins = HASH_TABLE_SIZE;
+
+ /* Set default value for unicast filter entries */
+ plat->unicast_filter_entries = 1;
+
+ /* Set the maxmtu to a default of JUMBO_LEN */
+ plat->maxmtu = JUMBO_LEN;
+
+ /* Set default number of RX and TX queues to use */
+ plat->tx_queues_to_use = 1;
+ plat->rx_queues_to_use = 1;
+
+ /* Disable Priority config by default */
+ plat->tx_queues_cfg[0].use_prio = false;
+ plat->rx_queues_cfg[0].use_prio = false;
+
+ /* Disable RX queues routing by default */
+ plat->rx_queues_cfg[0].pkt_route = 0x0;
+}
+
+static int intel_mgbe_common_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ int i;
+
+ plat->clk_csr = 5;
+ plat->has_gmac = 0;
+ plat->has_gmac4 = 1;
+ plat->force_sf_dma_mode = 0;
+ plat->tso_en = 1;
+
+ plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
+
+ for (i = 0; i < plat->rx_queues_to_use; i++) {
+ plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
+ plat->rx_queues_cfg[i].chan = i;
+
+ /* Disable Priority config by default */
+ plat->rx_queues_cfg[i].use_prio = false;
+
+ /* Disable RX queues routing by default */
+ plat->rx_queues_cfg[i].pkt_route = 0x0;
+ }
+
+ for (i = 0; i < plat->tx_queues_to_use; i++) {
+ plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
+
+ /* Disable Priority config by default */
+ plat->tx_queues_cfg[i].use_prio = false;
+ }
+
+ /* FIFO size is 4096 bytes for 1 tx/rx queue */
+ plat->tx_fifo_size = plat->tx_queues_to_use * 4096;
+ plat->rx_fifo_size = plat->rx_queues_to_use * 4096;
+
+ plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
+ plat->tx_queues_cfg[0].weight = 0x09;
+ plat->tx_queues_cfg[1].weight = 0x0A;
+ plat->tx_queues_cfg[2].weight = 0x0B;
+ plat->tx_queues_cfg[3].weight = 0x0C;
+ plat->tx_queues_cfg[4].weight = 0x0D;
+ plat->tx_queues_cfg[5].weight = 0x0E;
+ plat->tx_queues_cfg[6].weight = 0x0F;
+ plat->tx_queues_cfg[7].weight = 0x10;
+
+ plat->dma_cfg->pbl = 32;
+ plat->dma_cfg->pblx8 = true;
+ plat->dma_cfg->fixed_burst = 0;
+ plat->dma_cfg->mixed_burst = 0;
+ plat->dma_cfg->aal = 0;
+
+ plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi),
+ GFP_KERNEL);
+ if (!plat->axi)
+ return -ENOMEM;
+
+ plat->axi->axi_lpi_en = 0;
+ plat->axi->axi_xit_frm = 0;
+ plat->axi->axi_wr_osr_lmt = 1;
+ plat->axi->axi_rd_osr_lmt = 1;
+ plat->axi->axi_blen[0] = 4;
+ plat->axi->axi_blen[1] = 8;
+ plat->axi->axi_blen[2] = 16;
+
+ /* Set system clock */
+ plat->stmmac_clk = clk_register_fixed_rate(&pdev->dev,
+ "stmmac-clk", NULL, 0,
+ plat->clk_ptp_rate);
+
+ if (IS_ERR(plat->stmmac_clk)) {
+ dev_warn(&pdev->dev, "Fail to register stmmac-clk\n");
+ plat->stmmac_clk = NULL;
+ }
+ clk_prepare_enable(plat->stmmac_clk);
+
+ /* Set default value for multicast hash bins */
+ plat->multicast_filter_bins = HASH_TABLE_SIZE;
+
+ /* Set default value for unicast filter entries */
+ plat->unicast_filter_entries = 1;
+
+ /* Set the maxmtu to a default of JUMBO_LEN */
+ plat->maxmtu = JUMBO_LEN;
+
+ return 0;
+}
+
+static int ehl_common_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ int ret;
+
+ plat->rx_queues_to_use = 8;
+ plat->tx_queues_to_use = 8;
+ plat->clk_ptp_rate = 200000000;
+ ret = intel_mgbe_common_data(pdev, plat);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ehl_sgmii_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->bus_id = 1;
+ plat->phy_addr = 0;
+ plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+
+ return ehl_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info ehl_sgmii1g_pci_info = {
+ .setup = ehl_sgmii_data,
+};
+
+static int ehl_rgmii_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->bus_id = 1;
+ plat->phy_addr = 0;
+ plat->phy_interface = PHY_INTERFACE_MODE_RGMII;
+
+ return ehl_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info ehl_rgmii1g_pci_info = {
+ .setup = ehl_rgmii_data,
+};
+
+static int tgl_common_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ int ret;
+
+ plat->rx_queues_to_use = 6;
+ plat->tx_queues_to_use = 4;
+ plat->clk_ptp_rate = 200000000;
+ ret = intel_mgbe_common_data(pdev, plat);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int tgl_sgmii_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->bus_id = 1;
+ plat->phy_addr = 0;
+ plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ return tgl_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info tgl_sgmii1g_pci_info = {
+ .setup = tgl_sgmii_data,
+};
+
+static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = {
+ {
+ .func = 6,
+ .phy_addr = 1,
+ },
+};
+
+static const struct stmmac_pci_dmi_data galileo_stmmac_dmi_data = {
+ .func = galileo_stmmac_func_data,
+ .nfuncs = ARRAY_SIZE(galileo_stmmac_func_data),
+};
+
+static const struct stmmac_pci_func_data iot2040_stmmac_func_data[] = {
+ {
+ .func = 6,
+ .phy_addr = 1,
+ },
+ {
+ .func = 7,
+ .phy_addr = 1,
+ },
+};
+
+static const struct stmmac_pci_dmi_data iot2040_stmmac_dmi_data = {
+ .func = iot2040_stmmac_func_data,
+ .nfuncs = ARRAY_SIZE(iot2040_stmmac_func_data),
+};
+
+static const struct dmi_system_id quark_pci_dmi[] = {
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"),
+ },
+ .driver_data = (void *)&galileo_stmmac_dmi_data,
+ },
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
+ },
+ .driver_data = (void *)&galileo_stmmac_dmi_data,
+ },
+ /* There are 2 types of SIMATIC IOT2000: IOT2020 and IOT2040.
+ * The asset tag "6ES7647-0AA00-0YA2" is only for IOT2020 which
+ * has only one pci network device while other asset tags are
+ * for IOT2040 which has two.
+ */
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
+ DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
+ "6ES7647-0AA00-0YA2"),
+ },
+ .driver_data = (void *)&galileo_stmmac_dmi_data,
+ },
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
+ },
+ .driver_data = (void *)&iot2040_stmmac_dmi_data,
+ },
+ {}
+};
+
+static int quark_default_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ int ret;
+
+ /* Set common default data first */
+ common_default_data(plat);
+
+ /* Refuse to load the driver and register net device if MAC controller
+ * does not connect to any PHY interface.
+ */
+ ret = stmmac_pci_find_phy_addr(pdev, quark_pci_dmi);
+ if (ret < 0) {
+ /* Return error to the caller on DMI enabled boards. */
+ if (dmi_get_system_info(DMI_BOARD_NAME))
+ return ret;
+
+ /* Galileo boards with old firmware don't support DMI. We always
+ * use 1 here as PHY address, so at least the first found MAC
+ * controller would be probed.
+ */
+ ret = 1;
+ }
+
+ plat->bus_id = pci_dev_id(pdev);
+ plat->phy_addr = ret;
+ plat->phy_interface = PHY_INTERFACE_MODE_RMII;
+
+ plat->dma_cfg->pbl = 16;
+ plat->dma_cfg->pblx8 = true;
+ plat->dma_cfg->fixed_burst = 1;
+ /* AXI (TODO) */
+
+ return 0;
+}
+
+static const struct stmmac_pci_info quark_pci_info = {
+ .setup = quark_default_data,
+};
+
+/**
+ * intel_eth_pci_probe
+ *
+ * @pdev: pci device pointer
+ * @id: pointer to table of device id/id's.
+ *
+ * Description: This probing function gets called for all PCI devices which
+ * match the ID table and are not "owned" by other driver yet. This function
+ * gets passed a "struct pci_dev *" for each device whose entry in the ID table
+ * matches the device. The probe functions returns zero when the driver choose
+ * to take "ownership" of the device or an error code(-ve no) otherwise.
+ */
+static int intel_eth_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data;
+ struct plat_stmmacenet_data *plat;
+ struct stmmac_resources res;
+ int i;
+ int ret;
+
+ plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
+ if (!plat)
+ return -ENOMEM;
+
+ plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
+ sizeof(*plat->mdio_bus_data),
+ GFP_KERNEL);
+ if (!plat->mdio_bus_data)
+ return -ENOMEM;
+
+ plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg),
+ GFP_KERNEL);
+ if (!plat->dma_cfg)
+ return -ENOMEM;
+
+ /* Enable pci device */
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n",
+ __func__);
+ return ret;
+ }
+
+ /* Get the base address of device */
+ for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+ if (pci_resource_len(pdev, i) == 0)
+ continue;
+ ret = pcim_iomap_regions(pdev, BIT(i), pci_name(pdev));
+ if (ret)
+ return ret;
+ break;
+ }
+
+ pci_set_master(pdev);
+
+ ret = info->setup(pdev, plat);
+ if (ret)
+ return ret;
+
+ pci_enable_msi(pdev);
+
+ memset(&res, 0, sizeof(res));
+ res.addr = pcim_iomap_table(pdev)[i];
+ res.wol_irq = pdev->irq;
+ res.irq = pdev->irq;
+
+ return stmmac_dvr_probe(&pdev->dev, plat, &res);
+}
+
+/**
+ * intel_eth_pci_remove
+ *
+ * @pdev: platform device pointer
+ * Description: this function calls the main to free the net resources
+ * and releases the PCI resources.
+ */
+static void intel_eth_pci_remove(struct pci_dev *pdev)
+{
+ struct net_device *ndev = dev_get_drvdata(&pdev->dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int i;
+
+ stmmac_dvr_remove(&pdev->dev);
+
+ if (priv->plat->stmmac_clk)
+ clk_unregister_fixed_rate(priv->plat->stmmac_clk);
+
+ for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+ if (pci_resource_len(pdev, i) == 0)
+ continue;
+ pcim_iounmap_regions(pdev, BIT(i));
+ break;
+ }
+
+ pci_disable_device(pdev);
+}
+
+static int __maybe_unused intel_eth_pci_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int ret;
+
+ ret = stmmac_suspend(dev);
+ if (ret)
+ return ret;
+
+ ret = pci_save_state(pdev);
+ if (ret)
+ return ret;
+
+ pci_disable_device(pdev);
+ pci_wake_from_d3(pdev, true);
+ return 0;
+}
+
+static int __maybe_unused intel_eth_pci_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int ret;
+
+ pci_restore_state(pdev);
+ pci_set_power_state(pdev, PCI_D0);
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ pci_set_master(pdev);
+
+ return stmmac_resume(dev);
+}
+
+static SIMPLE_DEV_PM_OPS(intel_eth_pm_ops, intel_eth_pci_suspend,
+ intel_eth_pci_resume);
+
+#define PCI_DEVICE_ID_INTEL_QUARK_ID 0x0937
+#define PCI_DEVICE_ID_INTEL_EHL_RGMII1G_ID 0x4b30
+#define PCI_DEVICE_ID_INTEL_EHL_SGMII1G_ID 0x4b31
+#define PCI_DEVICE_ID_INTEL_TGL_SGMII1G_ID 0xa0ac
+
+static const struct pci_device_id intel_eth_pci_id_table[] = {
+ { PCI_DEVICE_DATA(INTEL, QUARK_ID, &quark_pci_info) },
+ { PCI_DEVICE_DATA(INTEL, EHL_RGMII1G_ID, &ehl_rgmii1g_pci_info) },
+ { PCI_DEVICE_DATA(INTEL, EHL_SGMII1G_ID, &ehl_sgmii1g_pci_info) },
+ { PCI_DEVICE_DATA(INTEL, TGL_SGMII1G_ID, &tgl_sgmii1g_pci_info) },
+ {}
+};
+
+MODULE_DEVICE_TABLE(pci, intel_eth_pci_id_table);
+
+static struct pci_driver intel_eth_pci_driver = {
+ .name = "intel-eth-pci",
+ .id_table = intel_eth_pci_id_table,
+ .probe = intel_eth_pci_probe,
+ .remove = intel_eth_pci_remove,
+ .driver = {
+ .pm = &intel_eth_pm_ops,
+ },
+};
+
+module_pci_driver(intel_eth_pci_driver);
+
+MODULE_DESCRIPTION("INTEL 10/100/1000 Ethernet PCI driver");
+MODULE_AUTHOR("Voon Weifeng <weifeng.voon@intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index b8c2489e4e23..a7a08c7f05d7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -14,49 +14,10 @@
#include "stmmac.h"
-/*
- * This struct is used to associate PCI Function of MAC controller on a board,
- * discovered via DMI, with the address of PHY connected to the MAC. The
- * negative value of the address means that MAC controller is not connected
- * with PHY.
- */
-struct stmmac_pci_func_data {
- unsigned int func;
- int phy_addr;
-};
-
-struct stmmac_pci_dmi_data {
- const struct stmmac_pci_func_data *func;
- size_t nfuncs;
-};
-
struct stmmac_pci_info {
int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
};
-static int stmmac_pci_find_phy_addr(struct pci_dev *pdev,
- const struct dmi_system_id *dmi_list)
-{
- const struct stmmac_pci_func_data *func_data;
- const struct stmmac_pci_dmi_data *dmi_data;
- const struct dmi_system_id *dmi_id;
- int func = PCI_FUNC(pdev->devfn);
- size_t n;
-
- dmi_id = dmi_first_match(dmi_list);
- if (!dmi_id)
- return -ENODEV;
-
- dmi_data = dmi_id->driver_data;
- func_data = dmi_data->func;
-
- for (n = 0; n < dmi_data->nfuncs; n++, func_data++)
- if (func_data->func == func)
- return func_data->phy_addr;
-
- return -ENODEV;
-}
-
static void common_default_data(struct plat_stmmacenet_data *plat)
{
plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
@@ -108,257 +69,6 @@ static const struct stmmac_pci_info stmmac_pci_info = {
.setup = stmmac_default_data,
};
-static int intel_mgbe_common_data(struct pci_dev *pdev,
- struct plat_stmmacenet_data *plat)
-{
- int i;
-
- plat->clk_csr = 5;
- plat->has_gmac = 0;
- plat->has_gmac4 = 1;
- plat->force_sf_dma_mode = 0;
- plat->tso_en = 1;
-
- plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
-
- for (i = 0; i < plat->rx_queues_to_use; i++) {
- plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
- plat->rx_queues_cfg[i].chan = i;
-
- /* Disable Priority config by default */
- plat->rx_queues_cfg[i].use_prio = false;
-
- /* Disable RX queues routing by default */
- plat->rx_queues_cfg[i].pkt_route = 0x0;
- }
-
- for (i = 0; i < plat->tx_queues_to_use; i++) {
- plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
-
- /* Disable Priority config by default */
- plat->tx_queues_cfg[i].use_prio = false;
- }
-
- /* FIFO size is 4096 bytes for 1 tx/rx queue */
- plat->tx_fifo_size = plat->tx_queues_to_use * 4096;
- plat->rx_fifo_size = plat->rx_queues_to_use * 4096;
-
- plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
- plat->tx_queues_cfg[0].weight = 0x09;
- plat->tx_queues_cfg[1].weight = 0x0A;
- plat->tx_queues_cfg[2].weight = 0x0B;
- plat->tx_queues_cfg[3].weight = 0x0C;
- plat->tx_queues_cfg[4].weight = 0x0D;
- plat->tx_queues_cfg[5].weight = 0x0E;
- plat->tx_queues_cfg[6].weight = 0x0F;
- plat->tx_queues_cfg[7].weight = 0x10;
-
- plat->mdio_bus_data->phy_mask = 0;
-
- plat->dma_cfg->pbl = 32;
- plat->dma_cfg->pblx8 = true;
- plat->dma_cfg->fixed_burst = 0;
- plat->dma_cfg->mixed_burst = 0;
- plat->dma_cfg->aal = 0;
-
- plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi),
- GFP_KERNEL);
- if (!plat->axi)
- return -ENOMEM;
-
- plat->axi->axi_lpi_en = 0;
- plat->axi->axi_xit_frm = 0;
- plat->axi->axi_wr_osr_lmt = 1;
- plat->axi->axi_rd_osr_lmt = 1;
- plat->axi->axi_blen[0] = 4;
- plat->axi->axi_blen[1] = 8;
- plat->axi->axi_blen[2] = 16;
-
- /* Set default value for multicast hash bins */
- plat->multicast_filter_bins = HASH_TABLE_SIZE;
-
- /* Set default value for unicast filter entries */
- plat->unicast_filter_entries = 1;
-
- /* Set the maxmtu to a default of JUMBO_LEN */
- plat->maxmtu = JUMBO_LEN;
-
- return 0;
-}
-
-static int ehl_common_data(struct pci_dev *pdev,
- struct plat_stmmacenet_data *plat)
-{
- int ret;
-
- plat->rx_queues_to_use = 8;
- plat->tx_queues_to_use = 8;
- ret = intel_mgbe_common_data(pdev, plat);
- if (ret)
- return ret;
-
- return 0;
-}
-
-static int ehl_sgmii_data(struct pci_dev *pdev,
- struct plat_stmmacenet_data *plat)
-{
- plat->bus_id = 1;
- plat->phy_addr = 0;
- plat->interface = PHY_INTERFACE_MODE_SGMII;
- return ehl_common_data(pdev, plat);
-}
-
-static struct stmmac_pci_info ehl_sgmii1g_pci_info = {
- .setup = ehl_sgmii_data,
-};
-
-static int ehl_rgmii_data(struct pci_dev *pdev,
- struct plat_stmmacenet_data *plat)
-{
- plat->bus_id = 1;
- plat->phy_addr = 0;
- plat->interface = PHY_INTERFACE_MODE_RGMII;
- return ehl_common_data(pdev, plat);
-}
-
-static struct stmmac_pci_info ehl_rgmii1g_pci_info = {
- .setup = ehl_rgmii_data,
-};
-
-static int tgl_common_data(struct pci_dev *pdev,
- struct plat_stmmacenet_data *plat)
-{
- int ret;
-
- plat->rx_queues_to_use = 6;
- plat->tx_queues_to_use = 4;
- ret = intel_mgbe_common_data(pdev, plat);
- if (ret)
- return ret;
-
- return 0;
-}
-
-static int tgl_sgmii_data(struct pci_dev *pdev,
- struct plat_stmmacenet_data *plat)
-{
- plat->bus_id = 1;
- plat->phy_addr = 0;
- plat->interface = PHY_INTERFACE_MODE_SGMII;
- return tgl_common_data(pdev, plat);
-}
-
-static struct stmmac_pci_info tgl_sgmii1g_pci_info = {
- .setup = tgl_sgmii_data,
-};
-
-static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = {
- {
- .func = 6,
- .phy_addr = 1,
- },
-};
-
-static const struct stmmac_pci_dmi_data galileo_stmmac_dmi_data = {
- .func = galileo_stmmac_func_data,
- .nfuncs = ARRAY_SIZE(galileo_stmmac_func_data),
-};
-
-static const struct stmmac_pci_func_data iot2040_stmmac_func_data[] = {
- {
- .func = 6,
- .phy_addr = 1,
- },
- {
- .func = 7,
- .phy_addr = 1,
- },
-};
-
-static const struct stmmac_pci_dmi_data iot2040_stmmac_dmi_data = {
- .func = iot2040_stmmac_func_data,
- .nfuncs = ARRAY_SIZE(iot2040_stmmac_func_data),
-};
-
-static const struct dmi_system_id quark_pci_dmi[] = {
- {
- .matches = {
- DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"),
- },
- .driver_data = (void *)&galileo_stmmac_dmi_data,
- },
- {
- .matches = {
- DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
- },
- .driver_data = (void *)&galileo_stmmac_dmi_data,
- },
- /*
- * There are 2 types of SIMATIC IOT2000: IOT2020 and IOT2040.
- * The asset tag "6ES7647-0AA00-0YA2" is only for IOT2020 which
- * has only one pci network device while other asset tags are
- * for IOT2040 which has two.
- */
- {
- .matches = {
- DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
- DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
- "6ES7647-0AA00-0YA2"),
- },
- .driver_data = (void *)&galileo_stmmac_dmi_data,
- },
- {
- .matches = {
- DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
- },
- .driver_data = (void *)&iot2040_stmmac_dmi_data,
- },
- {}
-};
-
-static int quark_default_data(struct pci_dev *pdev,
- struct plat_stmmacenet_data *plat)
-{
- int ret;
-
- /* Set common default data first */
- common_default_data(plat);
-
- /*
- * Refuse to load the driver and register net device if MAC controller
- * does not connect to any PHY interface.
- */
- ret = stmmac_pci_find_phy_addr(pdev, quark_pci_dmi);
- if (ret < 0) {
- /* Return error to the caller on DMI enabled boards. */
- if (dmi_get_system_info(DMI_BOARD_NAME))
- return ret;
-
- /*
- * Galileo boards with old firmware don't support DMI. We always
- * use 1 here as PHY address, so at least the first found MAC
- * controller would be probed.
- */
- ret = 1;
- }
-
- plat->bus_id = pci_dev_id(pdev);
- plat->phy_addr = ret;
- plat->phy_interface = PHY_INTERFACE_MODE_RMII;
-
- plat->dma_cfg->pbl = 16;
- plat->dma_cfg->pblx8 = true;
- plat->dma_cfg->fixed_burst = 1;
- /* AXI (TODO) */
-
- return 0;
-}
-
-static const struct stmmac_pci_info quark_pci_info = {
- .setup = quark_default_data,
-};
-
static int snps_gmac5_default_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
@@ -559,28 +269,15 @@ static int __maybe_unused stmmac_pci_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_pci_suspend, stmmac_pci_resume);
/* synthetic ID, no official vendor */
-#define PCI_VENDOR_ID_STMMAC 0x700
-
-#define STMMAC_QUARK_ID 0x0937
-#define STMMAC_DEVICE_ID 0x1108
-#define STMMAC_EHL_RGMII1G_ID 0x4b30
-#define STMMAC_EHL_SGMII1G_ID 0x4b31
-#define STMMAC_TGL_SGMII1G_ID 0xa0ac
-#define STMMAC_GMAC5_ID 0x7102
-
-#define STMMAC_DEVICE(vendor_id, dev_id, info) { \
- PCI_VDEVICE(vendor_id, dev_id), \
- .driver_data = (kernel_ulong_t)&info \
- }
+#define PCI_VENDOR_ID_STMMAC 0x0700
+
+#define PCI_DEVICE_ID_STMMAC_STMMAC 0x1108
+#define PCI_DEVICE_ID_SYNOPSYS_GMAC5_ID 0x7102
static const struct pci_device_id stmmac_id_table[] = {
- STMMAC_DEVICE(STMMAC, STMMAC_DEVICE_ID, stmmac_pci_info),
- STMMAC_DEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_MAC, stmmac_pci_info),
- STMMAC_DEVICE(INTEL, STMMAC_QUARK_ID, quark_pci_info),
- STMMAC_DEVICE(INTEL, STMMAC_EHL_RGMII1G_ID, ehl_rgmii1g_pci_info),
- STMMAC_DEVICE(INTEL, STMMAC_EHL_SGMII1G_ID, ehl_sgmii1g_pci_info),
- STMMAC_DEVICE(INTEL, STMMAC_TGL_SGMII1G_ID, tgl_sgmii1g_pci_info),
- STMMAC_DEVICE(SYNOPSYS, STMMAC_GMAC5_ID, snps_gmac5_pci_info),
+ { PCI_DEVICE_DATA(STMMAC, STMMAC, &stmmac_pci_info) },
+ { PCI_DEVICE_DATA(STMICRO, MAC, &stmmac_pci_info) },
+ { PCI_DEVICE_DATA(SYNOPSYS, GMAC5_ID, &snps_gmac5_pci_info) },
{}
};
--
2.16.4