From: James Smart <jsmart2021@gmail.com>
Date: Sun, 11 Apr 2021 18:31:25 -0700
Subject: scsi: lpfc: Eliminate use of LPFC_DRIVER_NAME in lpfc_attr.c
Patch-mainline: v5.13-rc1
Git-commit: 5b1f5089b6e65a8a146ae9d0c69708d369c349e4
References: bsc#1185472
During code inspection, several cases of creating a dynamic attribute names
in logs messages using a define was found. This is unnecessary.
Place the native symbol name in the log messages.
Link: https://lore.kernel.org/r/20210412013127.2387-15-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Daniel Wagner <dwagner@suse.de>
---
drivers/scsi/lpfc/lpfc_attr.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -2272,14 +2272,14 @@ lpfc_enable_bbcr_set(struct lpfc_hba *ph
{
if (lpfc_rangecheck(val, 0, 1) && phba->sli_rev == LPFC_SLI_REV4) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "3068 %s_enable_bbcr changed from %d to %d\n",
- LPFC_DRIVER_NAME, phba->cfg_enable_bbcr, val);
+ "3068 lpfc_enable_bbcr changed from %d to "
+ "%d\n", phba->cfg_enable_bbcr, val);
phba->cfg_enable_bbcr = val;
return 0;
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0451 %s_enable_bbcr cannot set to %d, range is 0, 1\n",
- LPFC_DRIVER_NAME, val);
+ "0451 lpfc_enable_bbcr cannot set to %d, range is 0, "
+ "1\n", val);
return -EINVAL;
}
@@ -2722,8 +2722,8 @@ lpfc_soft_wwn_enable_store(struct device
*/
if (vvvl == 1 && cpu_to_be32(*fawwpn_key) == FAPWWN_KEY_VENDOR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0051 "LPFC_DRIVER_NAME" soft wwpn can not"
- " be enabled: fawwpn is enabled\n");
+ "0051 lpfc soft wwpn can not be enabled: "
+ "fawwpn is enabled\n");
return -EINVAL;
}
@@ -5208,8 +5208,8 @@ lpfc_cq_max_proc_limit_init(struct lpfc_
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0371 "LPFC_DRIVER_NAME"_cq_max_proc_limit: "
- "%d out of range, using default\n",
+ "0371 lpfc_cq_max_proc_limit: %d out of range, using "
+ "default\n",
phba->cfg_cq_max_proc_limit);
return 0;
@@ -6043,8 +6043,8 @@ lpfc_sg_seg_cnt_init(struct lpfc_hba *ph
return 0;
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0409 "LPFC_DRIVER_NAME"_sg_seg_cnt attribute cannot "
- "be set to %d, allowed range is [%d, %d]\n",
+ "0409 lpfc_sg_seg_cnt attribute cannot be set to %d, "
+ "allowed range is [%d, %d]\n",
val, LPFC_MIN_SG_SEG_CNT, LPFC_MAX_SG_SEG_CNT);
phba->cfg_sg_seg_cnt = LPFC_DEFAULT_SG_SEG_CNT;
return -EINVAL;