From b2ffc75e2e990b09903f9d15ccd53bc5f3a4217c Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Fri, 19 Jun 2020 11:47:47 -0700
Subject: [PATCH] net: phy: Check harder for errors in get_phy_id()
Git-commit: b2ffc75e2e990b09903f9d15ccd53bc5f3a4217c
Patch-mainline: v5.8-rc3
References: bsc#1111666
Commit 02a6efcab675 ("net: phy: allow scanning busses with missing
phys") added a special condition to return -ENODEV in case -ENODEV or
-EIO was returned from the first read of the MII_PHYSID1 register.
In case the MDIO bus data line pull-up is not strong enough, the MDIO
bus controller will not flag this as a read error. This can happen when
a pluggable daughter card is not connected and weak internal pull-ups
are used (since that is the only option, otherwise the pins are
floating).
The second read of MII_PHYSID2 will be correctly flagged an error
though, but now we will return -EIO which will be treated as a hard
error, thus preventing MDIO bus scanning loops to continue succesfully.
Apply the same logic to both register reads, thus allowing the scanning
logic to proceed.
Fixes: 02a6efcab675 ("net: phy: allow scanning busses with missing phys")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Takashi Iwai <tiwai@suse.de>
---
drivers/net/phy/phy_device.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -602,8 +602,10 @@ static int get_phy_id(struct mii_bus *bu
/* Grab the bits from PHYIR2, and put them in the lower half */
phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
- if (phy_reg < 0)
- return -EIO;
+ if (phy_reg < 0) {
+ /* returning -ENODEV doesn't stop bus scanning */
+ return (phy_reg == -EIO || phy_reg == -ENODEV) ? -ENODEV : -EIO;
+ }
*phy_id |= (phy_reg & 0xffff);