From: Lucas Stach <l.stach@pengutronix.de>
Date: Fri, 10 Nov 2017 17:10:00 +0100
Subject: drm/imx: add FB modifier support
Git-commit: 9222f768f7b09fea4f12914b376ec975ef758a60
Patch-mainline: v4.16-rc1
References: FATE#326289 FATE#326079 FATE#326049 FATE#322398 FATE#326166
This adds FB modifier support for the Vivante single buffer tiled formats,
when the PRG/PRE engines are present.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Petr Tesarik <ptesarik@suse.com>
---
drivers/gpu/drm/imx/imx-drm-core.c | 1
drivers/gpu/drm/imx/ipuv3-plane.c | 67 +++++++++++++++++++++++++++++++++----
2 files changed, 61 insertions(+), 7 deletions(-)
--- a/drivers/gpu/drm/imx/imx-drm-core.c
+++ b/drivers/gpu/drm/imx/imx-drm-core.c
@@ -257,6 +257,7 @@ static int imx_drm_bind(struct device *d
drm->mode_config.max_height = 4096;
drm->mode_config.funcs = &imx_drm_mode_config_funcs;
drm->mode_config.helper_private = &imx_drm_mode_config_helpers;
+ drm->mode_config.allow_fb_modifiers = true;
drm_mode_config_init(drm);
--- a/drivers/gpu/drm/imx/ipuv3-plane.c
+++ b/drivers/gpu/drm/imx/ipuv3-plane.c
@@ -550,8 +550,8 @@ static void ipu_plane_atomic_update(stru
ipu_prg_channel_configure(ipu_plane->ipu_ch, axi_id,
drm_rect_width(&state->src) >> 16,
drm_rect_height(&state->src) >> 16,
- fb->pitches[0], fb->format->format,
- 0, &eba);
+ fb->pitches[0], fb->format->format,
+ fb->modifier, &eba);
}
if (old_state->fb && !drm_atomic_crtc_needs_modeset(crtc_state)) {
@@ -700,18 +700,71 @@ static const struct drm_plane_helper_fun
int ipu_planes_assign_pre(struct drm_device *dev,
struct drm_atomic_state *state)
{
+ struct drm_crtc_state *old_crtc_state, *crtc_state;
struct drm_plane_state *plane_state;
+ struct ipu_plane_state *ipu_state;
+ struct ipu_plane *ipu_plane;
struct drm_plane *plane;
+ struct drm_crtc *crtc;
int available_pres = ipu_prg_max_active_channels();
- int i;
+ int ret, i;
+ for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, crtc_state, i) {
+ ret = drm_atomic_add_affected_planes(state, crtc);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * We are going over the planes in 2 passes: first we assign PREs to
+ * planes with a tiling modifier, which need the PREs to resolve into
+ * linear. Any failure to assign a PRE there is fatal. In the second
+ * pass we try to assign PREs to linear FBs, to improve memory access
+ * patterns for them. Failure at this point is non-fatal, as we can
+ * scan out linear FBs without a PRE.
+ */
for_each_new_plane_in_state(state, plane, plane_state, i) {
- struct ipu_plane_state *ipu_state =
- to_ipu_plane_state(plane_state);
- struct ipu_plane *ipu_plane = to_ipu_plane(plane);
+ ipu_state = to_ipu_plane_state(plane_state);
+ ipu_plane = to_ipu_plane(plane);
+
+ if (!plane_state->fb) {
+ ipu_state->use_pre = false;
+ continue;
+ }
+
+ if (!(plane_state->fb->flags & DRM_MODE_FB_MODIFIERS) ||
+ plane_state->fb->modifier == DRM_FORMAT_MOD_LINEAR)
+ continue;
+
+ if (!ipu_prg_present(ipu_plane->ipu) || !available_pres)
+ return -EINVAL;
+
+ if (!ipu_prg_format_supported(ipu_plane->ipu,
+ plane_state->fb->format->format,
+ plane_state->fb->modifier))
+ return -EINVAL;
+
+ ipu_state->use_pre = true;
+ available_pres--;
+ }
+
+ for_each_new_plane_in_state(state, plane, plane_state, i) {
+ ipu_state = to_ipu_plane_state(plane_state);
+ ipu_plane = to_ipu_plane(plane);
+
+ if (!plane_state->fb) {
+ ipu_state->use_pre = false;
+ continue;
+ }
+
+ if ((plane_state->fb->flags & DRM_MODE_FB_MODIFIERS) &&
+ plane_state->fb->modifier != DRM_FORMAT_MOD_LINEAR)
+ continue;
+
+ /* make sure that modifier is initialized */
+ plane_state->fb->modifier = DRM_FORMAT_MOD_LINEAR;
if (ipu_prg_present(ipu_plane->ipu) && available_pres &&
- plane_state->fb &&
ipu_prg_format_supported(ipu_plane->ipu,
plane_state->fb->format->format,
plane_state->fb->modifier)) {