From: Philippe CORNU <philippe.cornu@st.com>
Date: Mon, 23 Apr 2018 16:10:51 +0200
Subject: drm/panel: otm8009a: Fix glitches by moving backlight enable to
otm8009a_enable()
Git-commit: 36830ce4eb2b5f6fe796c457b4043160c0e1e1fe
Patch-mainline: v4.19-rc1
References: FATE#326289 FATE#326079 FATE#326049 FATE#322398 FATE#326166
The backlight 1st update was in the otm8009a_prepare() function for a
bad reason: backlight was not working in video mode and the
otm8009a_prepare() is in command mode for the init sequence. As the
backlight is now fixed (no low-power mode), it is good to put it back
in the otm8009a_enable() function, avoiding also image glitches visible
on some "slow" devices.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423141054.13128-3-philippe.cornu@st.com
Acked-by: Petr Tesarik <ptesarik@suse.com>
---
drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
--- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -330,13 +330,6 @@ static int otm8009a_prepare(struct drm_p
ctx->prepared = true;
- /*
- * Power on the backlight. Note: end-user still controls brightness
- * Note: ctx->prepared must be true before updating the backlight.
- */
- ctx->bl_dev->props.power = FB_BLANK_UNBLANK;
- backlight_update_status(ctx->bl_dev);
-
return 0;
}
@@ -344,6 +337,16 @@ static int otm8009a_enable(struct drm_pa
{
struct otm8009a *ctx = panel_to_otm8009a(panel);
+ if (ctx->enabled)
+ return 0;
+
+ /*
+ * Power on the backlight. Note: end-user still controls brightness
+ * Note: ctx->prepared must be true before updating the backlight.
+ */
+ ctx->bl_dev->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(ctx->bl_dev);
+
ctx->enabled = true;
return 0;