From 38b50aa44495d5eb4218f0b82fc2da76505cec53 Mon Sep 17 00:00:00 2001
From: Shay Drory <shayd@nvidia.com>
Date: Wed, 28 Dec 2022 14:56:09 +0200
Subject: [PATCH 1/1] RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for device
Git-commit: 38b50aa44495d5eb4218f0b82fc2da76505cec53
Patch-mainline: v6.2-rc3
References: git-fixes
Currently, when mlx5_ib_get_hw_stats() is used for device (port_num = 0),
there is a special handling in order to use the correct counters, but,
port_num is being passed down the stack without any change. Also, some
functions assume that port_num >=1. As a result, the following oops can
occur.
BUG: unable to handle page fault for address: ffff89510294f1a8
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP
CPU: 8 PID: 1382 Comm: devlink Tainted: G W 6.1.0-rc4_for_upstream_base_2022_11_10_16_12 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock+0xc/0x20
Call Trace:
<TASK>
mlx5_ib_get_native_port_mdev+0x73/0xe0 [mlx5_ib]
do_get_hw_stats.constprop.0+0x109/0x160 [mlx5_ib]
mlx5_ib_get_hw_stats+0xad/0x180 [mlx5_ib]
ib_setup_device_attrs+0xf0/0x290 [ib_core]
ib_register_device+0x3bb/0x510 [ib_core]
? atomic_notifier_chain_register+0x67/0x80
__mlx5_ib_add+0x2b/0x80 [mlx5_ib]
mlx5r_probe+0xb8/0x150 [mlx5_ib]
? auxiliary_match_id+0x6a/0x90
auxiliary_bus_probe+0x3c/0x70
? driver_sysfs_add+0x6b/0x90
really_probe+0xcd/0x380
__driver_probe_device+0x80/0x170
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
? driver_allows_async_probing+0x60/0x60
? driver_allows_async_probing+0x60/0x60
bus_for_each_drv+0x7b/0xc0
__device_attach+0xbc/0x200
bus_probe_device+0x87/0xa0
device_add+0x404/0x940
? dev_set_name+0x53/0x70
__auxiliary_device_add+0x43/0x60
add_adev+0x99/0xe0 [mlx5_core]
mlx5_attach_device+0xc8/0x120 [mlx5_core]
mlx5_load_one_devl_locked+0xb2/0xe0 [mlx5_core]
devlink_reload+0x133/0x250
devlink_nl_cmd_reload+0x480/0x570
? devlink_nl_pre_doit+0x44/0x2b0
genl_family_rcv_msg_doit.isra.0+0xc2/0x110
genl_rcv_msg+0x180/0x2b0
? devlink_nl_cmd_region_read_dumpit+0x540/0x540
? devlink_reload+0x250/0x250
? devlink_put+0x50/0x50
? genl_family_rcv_msg_doit.isra.0+0x110/0x110
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1f6/0x2c0
netlink_sendmsg+0x237/0x490
sock_sendmsg+0x33/0x40
__sys_sendto+0x103/0x160
? handle_mm_fault+0x10e/0x290
? do_user_addr_fault+0x1c0/0x5f0
__x64_sys_sendto+0x25/0x30
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fix it by setting port_num to 1 in order to get device status and remove
unused variable.
Fixes: aac4492ef23a ("IB/mlx5: Update counter implementation for dual port RoCE")
Link: https://lore.kernel.org/r/98b82994c3cd3fa593b8a75ed3f3901e208beb0f.1672231736.git.leonro@nvidia.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Nicolas Morey <nmorey@suse.com>
---
drivers/infiniband/hw/mlx5/counters.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/counters.c b/drivers/infiniband/hw/mlx5/counters.c
index 945758f39523..3e1272695d99 100644
--- a/drivers/infiniband/hw/mlx5/counters.c
+++ b/drivers/infiniband/hw/mlx5/counters.c
@@ -278,7 +278,6 @@ static int do_get_hw_stats(struct ib_device *ibdev,
const struct mlx5_ib_counters *cnts = get_counters(dev, port_num - 1);
struct mlx5_core_dev *mdev;
int ret, num_counters;
- u32 mdev_port_num;
if (!stats)
return -EINVAL;
@@ -299,8 +298,9 @@ static int do_get_hw_stats(struct ib_device *ibdev,
}
if (MLX5_CAP_GEN(dev->mdev, cc_query_allowed)) {
- mdev = mlx5_ib_get_native_port_mdev(dev, port_num,
- &mdev_port_num);
+ if (!port_num)
+ port_num = 1;
+ mdev = mlx5_ib_get_native_port_mdev(dev, port_num, NULL);
if (!mdev) {
/* If port is not affiliated yet, its in down state
* which doesn't have any counters yet, so it would be
--
2.38.0.1.gee35aeee4b76