From d67ddd17dedd1b7f1c287a9f32f5db084a7c85eb Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Sat, 26 Feb 2022 23:50:32 +0300
Subject: [PATCH] arm64: dts: qcom: pm8350c: stop depending on thermal_zones label
Git-commit: d67ddd17dedd1b7f1c287a9f32f5db084a7c85eb
Patch-mainline: v5.19-rc1
References: git-fixes
Most of SoC device trees do not provide the thermal_zones label. Thus
stop depending on it and use the full path to the thermal zones nodes.
Fixes: 3795fe7d497b ("arm64: dts: qcom: pm8350c: Add temp-alarm support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226205035.1826360-5-dmitry.baryshkov@linaro.org
Acked-by: Takashi Iwai <tiwai@suse.de>
---
arch/arm64/boot/dts/qcom/pm8350c.dtsi | 32 ++++++++++++++-------------
1 file changed, 17 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
index e1b75ae0a823..9bc6464477bd 100644
--- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
@@ -32,23 +32,25 @@ pm8350c_gpios: gpio@8800 {
};
};
-&thermal_zones {
- pm8350c_thermal: pm8350c-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
- thermal-sensors = <&pm8350c_temp_alarm>;
+/ {
+ thermal-zones {
+ pm8350c_thermal: pm8350c-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8350c_temp_alarm>;
- trips {
- pm8350c_trip0: trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+ trips {
+ pm8350c_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
- pm8350c_crit: pm8350c-crit {
- temperature = <115000>;
- hysteresis = <0>;
- type = "critical";
+ pm8350c_crit: pm8350c-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
};
};
};
--
2.35.3