From: Ramalingam C <ramalingam.c@intel.com>
Date: Thu, 18 Jan 2018 11:18:08 +0530
Subject: drm/i915: Check for downstream topology errors
Git-commit: 49d85d034268ab9d9156ff6f81cc07d4caad03f6
Patch-mainline: v4.17-rc1
References: FATE#326289 FATE#326079 FATE#326049 FATE#322398 FATE#326166
HDCP compliant Repeaters can support max of 127 devices and max
depth of 7 for downstream topology.
If these max limits are exceeded, repeater will set the
topology error flags MAX_CASCADE_EXCEEDED and/or MAX_DEVS_EXCEEDED
in Bstatus followed by asserting READY/CP_IRQ for HDCP transmitter.
This patch check for these error flags as soon as READY bit is asserted.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
[seanpaul fixed checkpatch alignment issue]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1516254488-4971-5-git-send-email-ramalingam.c@intel.com
Acked-by: Petr Tesarik <ptesarik@suse.com>
---
drivers/gpu/drm/i915/intel_hdcp.c | 6 ++++++
include/drm/drm_hdcp.h | 2 ++
2 files changed, 8 insertions(+)
--- a/drivers/gpu/drm/i915/intel_hdcp.c
+++ b/drivers/gpu/drm/i915/intel_hdcp.c
@@ -160,6 +160,12 @@ int intel_hdcp_auth_downstream(struct in
if (ret)
return ret;
+ if (DRM_HDCP_MAX_DEVICE_EXCEEDED(bstatus[0]) ||
+ DRM_HDCP_MAX_CASCADE_EXCEEDED(bstatus[1])) {
+ DRM_ERROR("Max Topology Limit Exceeded\n");
+ return -EPERM;
+ }
+
/* If there are no downstream devices, we're all done. */
num_downstream = DRM_HDCP_NUM_DOWNSTREAM(bstatus[0]);
if (num_downstream == 0) {
--- a/include/drm/drm_hdcp.h
+++ b/include/drm/drm_hdcp.h
@@ -20,6 +20,8 @@
#define DRM_HDCP_V_PRIME_PART_LEN 4
#define DRM_HDCP_V_PRIME_NUM_PARTS 5
#define DRM_HDCP_NUM_DOWNSTREAM(x) (x & 0x3f)
+#define DRM_HDCP_MAX_CASCADE_EXCEEDED(x) (x & BIT(3))
+#define DRM_HDCP_MAX_DEVICE_EXCEEDED(x) (x & BIT(7))
/* Slave address for the HDCP registers in the receiver */
#define DRM_HDCP_DDC_ADDR 0x3A