From: Anson Huang <Anson.Huang@nxp.com>
Date: Mon, 30 Dec 2019 09:41:08 +0800
Subject: ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
Git-commit: d4918ebb5c256d26696a13e78ac68c146111191a
Patch-mainline: v5.5-rc7
References: bsc#1164165

The vdd3p0 LDO's input should be from external USB VBUS directly, NOT
PMIC's power supply, the vdd3p0 LDO's target output voltage can be
controlled by SW, and it requires input voltage to be high enough, with
incorrect power supply assigned, if the power supply's voltage is lower
than the LDO target output voltage, it will return fail and skip the LDO
voltage adjustment, so remove the power supply assignment for vdd3p0 to
avoid such scenario.

Fixes: 37a4bdead109 ("ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
---
 arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 ----
 arch/arm/boot/dts/imx6sx-sdb.dts      | 4 ----
 2 files changed, 8 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index f1830ed387a5..91a7548fdb8d 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -159,10 +159,6 @@ &reg_vdd1p1 {
 	vin-supply = <&vgen6_reg>;
 };
 
-&reg_vdd3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &reg_vdd2p5 {
 	vin-supply = <&vgen6_reg>;
 };
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index a8ee7087af5a..5a63ca615722 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -141,10 +141,6 @@ &reg_vdd1p1 {
 	vin-supply = <&vgen6_reg>;
 };
 
-&reg_vdd3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &reg_vdd2p5 {
 	vin-supply = <&vgen6_reg>;
 };
-- 
2.25.0