From: Vidya Sagar <vidyas@nvidia.com>
Date: Tue, 13 Aug 2019 17:06:22 +0530
Subject: PCI: dwc: Add support to enable CDM register check
Git-commit: 07f123def73e07e398537be7a5b43a244cb0cbf3
Patch-mainline: v5.4-rc1
References: jsc#SLE-9391,jsc#SLE-9388,jsc#SLE-10608
Add support to enable CDM (Configuration Dependent Module) register
check for any data corruption based on the DT property
'snps,enable-cdm-check'.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com>
---
drivers/pci/controller/dwc/pcie-designware.c | 7 +++++++
drivers/pci/controller/dwc/pcie-designware.h | 9 +++++++++
2 files changed, 16 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 1d87e823de21..59eaeeb21dbe 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -547,4 +547,11 @@ void dw_pcie_setup(struct dw_pcie *pci)
break;
}
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+
+ if (of_property_read_bool(np, "snps,enable-cdm-check")) {
+ val = dw_pcie_readl_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS);
+ val |= PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS |
+ PCIE_PL_CHK_REG_CHK_REG_START;
+ dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, val);
+ }
}
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 11c223471416..5a18e94e52c8 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -86,6 +86,15 @@
#define PCIE_MISC_CONTROL_1_OFF 0x8BC
#define PCIE_DBI_RO_WR_EN BIT(0)
+#define PCIE_PL_CHK_REG_CONTROL_STATUS 0xB20
+#define PCIE_PL_CHK_REG_CHK_REG_START BIT(0)
+#define PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS BIT(1)
+#define PCIE_PL_CHK_REG_CHK_REG_COMPARISON_ERROR BIT(16)
+#define PCIE_PL_CHK_REG_CHK_REG_LOGIC_ERROR BIT(17)
+#define PCIE_PL_CHK_REG_CHK_REG_COMPLETE BIT(18)
+
+#define PCIE_PL_CHK_REG_ERR_ADDR 0xB28
+
/*
* iATU Unroll-specific register definitions
* From 4.80 core version the address translation will be made by unroll
--
2.16.4