From: Edwin Peer <edwin.peer@broadcom.com>
Date: Mon, 4 May 2020 04:50:33 -0400
Subject: bnxt_en: fix ethtool_reset_flags ABI violations
Patch-mainline: v5.8-rc1
Git-commit: 7a13240e371891d90cd51e3ea55ea04f4b2065dc
References: jsc#SLE-15075

The ethtool ABI specifies that the reset operation should only clear
the flags that were actually reset. Setting the flags to zero after
a chip reset violates this because it does not include resetting the
application processor complex. Similarly, components that are not yet
defined are also not necessarily being reset.

The fact that chip reset does not cover the AP also means that it is
inappropriate to treat these two components exclusively of one another.
The ABI provides a mechanism to report a failure to reset independent
components via the returned bitmask, so it is also wrong to fail hard
if one of a set of independent resets is not possible.

It is incorrect to rely on the passed by reference flags in bnxt_reset(),
which are being updated as components are reset. The initially requested
value should be used instead so that hard errors do not propagate if any
earlier components could have been reset successfully.

Note, AP and chip resets are global in nature. Dedicated resets are
thus not currently supported.

Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c |   47 +++++++++++-----------
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h |    8 ++-
 2 files changed, 31 insertions(+), 24 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -3001,7 +3001,10 @@ static void bnxt_self_test(struct net_de
 static int bnxt_reset(struct net_device *dev, u32 *flags)
 {
 	struct bnxt *bp = netdev_priv(dev);
-	int rc = 0;
+	u32 req = *flags;
+
+	if (!req)
+		return -EINVAL;
 
 	if (!BNXT_PF(bp)) {
 		netdev_err(dev, "Reset is not supported from a VF\n");
@@ -3015,33 +3018,33 @@ static int bnxt_reset(struct net_device
 		return -EBUSY;
 	}
 
-	if (*flags == ETH_RESET_ALL) {
+	if ((req & BNXT_FW_RESET_CHIP) == BNXT_FW_RESET_CHIP) {
 		/* This feature is not supported in older firmware versions */
-		if (bp->hwrm_spec_code < 0x10803)
-			return -EOPNOTSUPP;
-
-		rc = bnxt_firmware_reset_chip(dev);
-		if (!rc) {
-			netdev_info(dev, "Reset request successful.\n");
-			if (!(bp->fw_cap & BNXT_FW_CAP_HOT_RESET))
-				netdev_info(dev, "Reload driver to complete reset\n");
-			*flags = 0;
+		if (bp->hwrm_spec_code >= 0x10803) {
+			if (!bnxt_firmware_reset_chip(dev)) {
+				netdev_info(dev, "Firmware reset request successful.\n");
+				if (!(bp->fw_cap & BNXT_FW_CAP_HOT_RESET))
+					netdev_info(dev, "Reload driver to complete reset\n");
+				*flags &= ~BNXT_FW_RESET_CHIP;
+			}
+		} else if (req == BNXT_FW_RESET_CHIP) {
+			return -EOPNOTSUPP; /* only request, fail hard */
 		}
-	} else if (*flags == ETH_RESET_AP) {
-		/* This feature is not supported in older firmware versions */
-		if (bp->hwrm_spec_code < 0x10803)
-			return -EOPNOTSUPP;
+	}
 
-		rc = bnxt_firmware_reset_ap(dev);
-		if (!rc) {
-			netdev_info(dev, "Reset Application Processor request successful.\n");
-			*flags = 0;
+	if (req & BNXT_FW_RESET_AP) {
+		/* This feature is not supported in older firmware versions */
+		if (bp->hwrm_spec_code >= 0x10803) {
+			if (!bnxt_firmware_reset_ap(dev)) {
+				netdev_info(dev, "Reset application processor successful.\n");
+				*flags &= ~BNXT_FW_RESET_AP;
+			}
+		} else if (req == BNXT_FW_RESET_AP) {
+			return -EOPNOTSUPP; /* only request, fail hard */
 		}
-	} else {
-		rc = -EINVAL;
 	}
 
-	return rc;
+	return 0;
 }
 
 static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg, int msg_len,
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
@@ -77,8 +77,12 @@ struct hwrm_dbg_cmn_output {
 #define BNXT_LED_DFLT_ENABLES(x)			\
 	cpu_to_le32(BNXT_LED_DFLT_ENA << (BNXT_LED_DFLT_ENA_SHIFT * (x)))
 
-#define BNXT_FW_RESET_AP	0xfffe
-#define BNXT_FW_RESET_CHIP	0xffff
+#define BNXT_FW_RESET_AP	(ETH_RESET_AP << ETH_RESET_SHARED_SHIFT)
+#define BNXT_FW_RESET_CHIP	((ETH_RESET_MGMT | ETH_RESET_IRQ |	\
+				  ETH_RESET_DMA | ETH_RESET_FILTER |	\
+				  ETH_RESET_OFFLOAD | ETH_RESET_MAC |	\
+				  ETH_RESET_PHY | ETH_RESET_RAM)	\
+				 << ETH_RESET_SHARED_SHIFT)
 
 extern const struct ethtool_ops bnxt_ethtool_ops;