From b424808115cb0141da851082d84ede20caa2215c Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sat, 11 Jul 2020 23:01:50 +0200
Subject: [PATCH] brcm80211: brcmsmac: Move LEDs to GPIO descriptors
Git-commit: b424808115cb0141da851082d84ede20caa2215c
Patch-mainline: v5.9-rc1
References: jsc#SLE-13430

The code in the BRCM80211 BRCMSMAC driver is using the legacy
GPIO API to to a complex check of the validity of the base of
the GPIO chip and whether it is present at all and then adding
an offset to the base of the chip.

Use the existing function to obtain a GPIO line internally
from a GPIO chip so we can use the offset directly and
modernize the code to use GPIO descriptors instead of integers
from the global GPIO numberspace.

Cc: Wright Feng <wright.feng@cypress.com>
Cc: Frank Kao <frank.kao@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200711210150.4943-1-linus.walleij@linaro.org
Acked-by: Takashi Iwai <tiwai@suse.de>

---
 .../net/wireless/broadcom/brcm80211/brcmsmac/led.c | 62 +++++++++-------------
 .../net/wireless/broadcom/brcm80211/brcmsmac/led.h |  6 ++-
 2 files changed, 29 insertions(+), 39 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.c
index c0a5449ed72c..c1b9ac692d26 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.c
@@ -1,7 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <net/mac80211.h>
 #include <linux/bcma/bcma_driver_chipcommon.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
 
 #include "mac80211_if.h"
 #include "pub.h"
@@ -19,16 +21,13 @@
 
 static void brcms_radio_led_ctrl(struct brcms_info *wl, bool state)
 {
-	if (wl->radio_led.gpio == -1)
+	if (!wl->radio_led.gpiod)
 		return;
 
-	if (wl->radio_led.active_low)
-		state = !state;
-
 	if (state)
-		gpio_set_value(wl->radio_led.gpio, 1);
+		gpiod_set_value(wl->radio_led.gpiod, 1);
 	else
-		gpio_set_value(wl->radio_led.gpio, 0);
+		gpiod_set_value(wl->radio_led.gpiod, 0);
 }
 
 
@@ -45,8 +44,8 @@ void brcms_led_unregister(struct brcms_info *wl)
 {
 	if (wl->led_dev.dev)
 		led_classdev_unregister(&wl->led_dev);
-	if (wl->radio_led.gpio != -1)
-		gpio_free(wl->radio_led.gpio);
+	if (wl->radio_led.gpiod)
+		gpiochip_free_own_desc(wl->radio_led.gpiod);
 }
 
 int brcms_led_register(struct brcms_info *wl)
@@ -61,12 +60,8 @@ int brcms_led_register(struct brcms_info *wl)
 		&sprom->gpio1,
 		&sprom->gpio2,
 		&sprom->gpio3 };
-	unsigned gpio = -1;
-	bool active_low = false;
-
-	/* none by default */
-	radio_led->gpio = -1;
-	radio_led->active_low = false;
+	int hwnum = -1;
+	enum gpio_lookup_flags lflags = GPIO_ACTIVE_HIGH;
 
 	if (!bcma_gpio || !gpio_is_valid(bcma_gpio->base))
 		return -ENODEV;
@@ -75,30 +70,26 @@ int brcms_led_register(struct brcms_info *wl)
 	for (i = 0; i < BRCMS_LED_NO; i++) {
 		u8 led = *leds[i];
 		if ((led & BRCMS_LED_BEH_MASK) == BRCMS_LED_RADIO) {
-			gpio = bcma_gpio->base + i;
+			hwnum = i;
 			if (led & BRCMS_LED_AL_MASK)
-				active_low = true;
+				lflags = GPIO_ACTIVE_LOW;
 			break;
 		}
 	}
 
-	if (gpio == -1 || !gpio_is_valid(gpio))
+	/* No LED, bail out */
+	if (hwnum == -1)
 		return -ENODEV;
 
-	/* request and configure LED gpio */
-	err = gpio_request_one(gpio,
-				active_low ? GPIOF_OUT_INIT_HIGH
-					: GPIOF_OUT_INIT_LOW,
-				"radio on");
-	if (err) {
-		wiphy_err(wl->wiphy, "requesting led gpio %d failed (err: %d)\n",
-			  gpio, err);
-		return err;
-	}
-	err = gpio_direction_output(gpio, 1);
-	if (err) {
-		wiphy_err(wl->wiphy, "cannot set led gpio %d to output (err: %d)\n",
-			  gpio, err);
+	/* Try to obtain this LED GPIO line */
+	radio_led->gpiod = gpiochip_request_own_desc(bcma_gpio, hwnum,
+						     "radio on", lflags,
+						     GPIOD_OUT_LOW);
+
+	if (IS_ERR(radio_led->gpiod)) {
+		err = PTR_ERR(radio_led->gpiod);
+		wiphy_err(wl->wiphy, "requesting led GPIO failed (err: %d)\n",
+			  err);
 		return err;
 	}
 
@@ -117,11 +108,8 @@ int brcms_led_register(struct brcms_info *wl)
 		return err;
 	}
 
-	wiphy_info(wl->wiphy, "registered radio enabled led device: %s gpio: %d\n",
-		   wl->radio_led.name,
-		   gpio);
-	radio_led->gpio = gpio;
-	radio_led->active_low = active_low;
+	wiphy_info(wl->wiphy, "registered radio enabled led device: %s\n",
+		   wl->radio_led.name);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h
index 17a0b1f5dbcf..d65f5c268fd7 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h
@@ -16,10 +16,12 @@
 
 #ifndef _BRCM_LED_H_
 #define _BRCM_LED_H_
+
+struct gpio_desc;
+
 struct brcms_led {
 	char name[32];
-	unsigned gpio;
-	bool active_low;
+	struct gpio_desc *gpiod;
 };
 
 #ifdef CONFIG_BCMA_DRIVER_GPIO
-- 
2.16.4