From: Jacob Keller <jacob.e.keller@intel.com>
Date: Thu, 9 Jan 2020 14:46:16 -0800
Subject: devlink: convert driver-specific files to reStructuredText
Patch-mainline: v5.6-rc1
Git-commit: 6c39e015f87fb46f68532d063d4fd337d094fdeb
References: jsc#SLE-12878
Several drivers document what parameters they support in
a devlink-params-*.txt file. This file is supposed to contain both the
list of generic parameters implemented by the driver, as well as a list
of driver-specific parameters and their descriptions.
It would also be good if the driver documentation included other
driver-specific implementations, such as info versions, devlink
regions, and so forth.
Convert all of these documentation files to reStructuredText, and rename
them to just the driver name. Future changes will include other
driver-specific implementations. Each file will contain a table for the
generic parameters implemented, as well as a separate table for the
driver-specific parameters.
Future sections such as for devlink info versions will be added to these
files. This avoids creating additional devlink-<feature>-<driver> files
for each devlink feature, reducing clutter in the documentation folder.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
Documentation/networking/devlink/bnxt.rst | 41 ++++++++++++++
Documentation/networking/devlink/devlink-params-bnxt.txt | 18 ------
Documentation/networking/devlink/devlink-params-mlx5.txt | 17 -----
Documentation/networking/devlink/devlink-params-mlxsw.txt | 10 ---
Documentation/networking/devlink/devlink-params-nfp.txt | 5 -
Documentation/networking/devlink/index.rst | 22 +++++++
Documentation/networking/devlink/mlx5.rst | 41 ++++++++++++++
Documentation/networking/devlink/mlxsw.rst | 38 ++++++++++++
Documentation/networking/devlink/mv88e6xxx.rst | 28 +++++++++
Documentation/networking/devlink/nfp.rst | 20 ++++++
Documentation/networking/devlink/ti-cpsw-switch.rst | 31 ++++++++++
MAINTAINERS | 1
12 files changed, 221 insertions(+), 51 deletions(-)
create mode 100644 Documentation/networking/devlink/bnxt.rst
delete mode 100644 Documentation/networking/devlink/devlink-params-bnxt.txt
delete mode 100644 Documentation/networking/devlink/devlink-params-mlx5.txt
delete mode 100644 Documentation/networking/devlink/devlink-params-mlxsw.txt
delete mode 100644 Documentation/networking/devlink/devlink-params-mv88e6xxx.txt
delete mode 100644 Documentation/networking/devlink/devlink-params-nfp.txt
delete mode 100644 Documentation/networking/devlink/devlink-params-ti-cpsw-switch.txt
create mode 100644 Documentation/networking/devlink/mlx5.rst
create mode 100644 Documentation/networking/devlink/mlxsw.rst
create mode 100644 Documentation/networking/devlink/mv88e6xxx.rst
create mode 100644 Documentation/networking/devlink/nfp.rst
create mode 100644 Documentation/networking/devlink/ti-cpsw-switch.rst
--- /dev/null
+++ b/Documentation/networking/devlink/bnxt.rst
@@ -0,0 +1,41 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+bnxt devlink support
+====================
+
+This document describes the devlink features implemented by the ``bnxt``
+device driver.
+
+Parameters
+==========
+
+.. list-table:: Generic parameters implemented
+
+ * - Name
+ - Mode
+ * - ``enable_sriov``
+ - Permanent
+ * - ``ignore_ari``
+ - Permanent
+ * - ``msix_vec_per_pf_max``
+ - Permanent
+ * - ``msix_vec_per_pf_min``
+ - Permanent
+
+The ``bnxt`` driver also implements the following driver-specific
+parameters.
+
+.. list-table:: Driver-specific parameters implemented
+ :widths: 5 5 5 85
+
+ * - Name
+ - Type
+ - Mode
+ - Description
+ * - ``gre_ver_check``
+ - Boolean
+ - Permanent
+ - Generic Routing Encapsulation (GRE) version check will be enabled in
+ the device. If disabled, the device will skip the version check for
+ incoming packets.
--- a/Documentation/networking/devlink/devlink-params-bnxt.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-enable_sriov [DEVICE, GENERIC]
- Configuration mode: Permanent
-
-ignore_ari [DEVICE, GENERIC]
- Configuration mode: Permanent
-
-msix_vec_per_pf_max [DEVICE, GENERIC]
- Configuration mode: Permanent
-
-msix_vec_per_pf_min [DEVICE, GENERIC]
- Configuration mode: Permanent
-
-gre_ver_check [DEVICE, DRIVER-SPECIFIC]
- Generic Routing Encapsulation (GRE) version check will
- be enabled in the device. If disabled, device skips
- version checking for incoming packets.
- Type: Boolean
- Configuration mode: Permanent
--- a/Documentation/networking/devlink/devlink-params-mlx5.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-flow_steering_mode [DEVICE, DRIVER-SPECIFIC]
- Controls the flow steering mode of the driver.
- Two modes are supported:
- 1. 'dmfs' - Device managed flow steering.
- 2. 'smfs - Software/Driver managed flow steering.
- In DMFS mode, the HW steering entities are created and
- managed through the Firmware.
- In SMFS mode, the HW steering entities are created and
- managed though by the driver directly into Hardware
- without firmware intervention.
- Type: String
- Configuration mode: runtime
-
-enable_roce [DEVICE, GENERIC]
- Enable handling of RoCE traffic in the device.
- Defaultly enabled.
- Configuration mode: driverinit
--- a/Documentation/networking/devlink/devlink-params-mlxsw.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-fw_load_policy [DEVICE, GENERIC]
- Configuration mode: driverinit
-
-acl_region_rehash_interval [DEVICE, DRIVER-SPECIFIC]
- Sets an interval for periodic ACL region rehashes.
- The value is in milliseconds, minimal value is "3000".
- Value "0" disables the periodic work.
- The first rehash will be run right after value is set.
- Type: u32
- Configuration mode: runtime
--- a/Documentation/networking/devlink/devlink-params-nfp.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-fw_load_policy [DEVICE, GENERIC]
- Configuration mode: permanent
-
-reset_dev_on_drv_probe [DEVICE, GENERIC]
- Configuration mode: permanent
--- a/Documentation/networking/devlink/index.rst
+++ b/Documentation/networking/devlink/index.rst
@@ -4,7 +4,11 @@ Linux Devlink Documentation
devlink is an API to expose device information and resources not directly
related to any device class, such as chip-wide/switch-ASIC-wide configuration.
-Contents:
+Interface documentation
+-----------------------
+
+The following pages describe various interfaces available through devlink in
+general.
.. toctree::
:maxdepth: 1
@@ -14,3 +18,19 @@ Contents:
devlink-params
devlink-trap
devlink-trap-netdevsim
+
+Driver-specific documentation
+-----------------------------
+
+Each driver that implements ``devlink`` is expected to document what
+parameters, info versions, and other features it supports.
+
+.. toctree::
+ :maxdepth: 1
+
+ bnxt
+ mlx5
+ mlxsw
+ mv88e6xxx
+ nfp
+ ti-cpsw-switch
--- /dev/null
+++ b/Documentation/networking/devlink/mlx5.rst
@@ -0,0 +1,41 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+mlx5 devlink support
+====================
+
+This document describes the devlink features implemented by the ``mlx5``
+device driver.
+
+Parameters
+==========
+
+.. list-table:: Generic parameters implemented
+
+ * - Name
+ - Mode
+ * - ``enable_roce``
+ - driverinit
+
+The ``mlx5`` driver also implements the following driver-specific
+parameters.
+
+.. list-table:: Driver-specific parameters implemented
+ :widths: 5 5 5 85
+
+ * - Name
+ - Type
+ - Mode
+ - Description
+ * - ``flow_steering_mode``
+ - string
+ - runtime
+ - Controls the flow steering mode of the driver
+
+ * ``dmfs`` Device managed flow steering. In DMFS mode, the HW
+ steering entities are created and managed through firmware.
+ * ``smfs`` Software managed flow steering. In SMFS mode, the HW
+ steering entities are created and manage through the driver without
+ firmware intervention.
+
+The ``mlx5`` driver supports reloading via ``DEVLINK_CMD_RELOAD``
--- /dev/null
+++ b/Documentation/networking/devlink/mlxsw.rst
@@ -0,0 +1,38 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+mlxsw devlink support
+=====================
+
+This document describes the devlink features implemented by the ``mlxsw``
+device driver.
+
+Parameters
+==========
+
+.. list-table:: Generic parameters implemented
+
+ * - Name
+ - Mode
+ * - ``fw_load_policy``
+ - driverinit
+
+The ``mlxsw`` driver also implements the following driver-specific
+parameters.
+
+.. list-table:: Driver-specific parameters implemented
+ :widths: 5 5 5 85
+
+ * - Name
+ - Type
+ - Mode
+ - Description
+ * - ``acl_region_rehash_interval``
+ - u32
+ - runtime
+ - Sets an interval for periodic ACL region rehashes. The value is
+ specified in milliseconds, with a minimum of ``3000``. The value of
+ ``0`` disables periodic work entirely. The first rehash will be run
+ immediately after the value is set.
+
+The ``mlxsw`` driver supports reloading via ``DEVLINK_CMD_RELOAD``
--- /dev/null
+++ b/Documentation/networking/devlink/mv88e6xxx.rst
@@ -0,0 +1,28 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+mv88e6xxx devlink support
+=========================
+
+This document describes the devlink features implemented by the ``mv88e6xxx``
+device driver.
+
+Parameters
+==========
+
+The ``mv88e6xxx`` driver implements the following driver-specific parameters.
+
+.. list-table:: Driver-specific parameters implemented
+ :widths: 5 5 5 85
+
+ * - Name
+ - Type
+ - Mode
+ - Description
+ * - ``ATU_hash``
+ - u8
+ - runtime
+ - Select one of four possible hashing algorithms for MAC addresses in
+ the Address Translation Unit. A value of 3 may work better than the
+ default of 1 when many MAC addresses have the same OUI. Only the
+ values 0 to 3 are valid for this parameter.
--- /dev/null
+++ b/Documentation/networking/devlink/nfp.rst
@@ -0,0 +1,20 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================
+nfp devlink support
+===================
+
+This document describes the devlink features implemented by the ``nfp``
+device driver.
+
+Parameters
+==========
+
+.. list-table:: Generic parameters implemented
+
+ * - Name
+ - Mode
+ * - ``fw_load_policy``
+ - permanent
+ * - ``reset_dev_on_drv_probe``
+ - permanent
--- /dev/null
+++ b/Documentation/networking/devlink/ti-cpsw-switch.rst
@@ -0,0 +1,31 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================
+ti-cpsw-switch devlink support
+==============================
+
+This document describes the devlink features implemented by the ``ti-cpsw-switch``
+device driver.
+
+Parameters
+==========
+
+The ``ti-cpsw-switch`` driver implements the following driver-specific
+parameters.
+
+.. list-table:: Driver-specific parameters implemented
+ :widths: 5 5 5 85
+
+ * - Name
+ - Type
+ - Mode
+ - Description
+ * - ``ale_bypass``
+ - Boolean
+ - runtime
+ - Enables ALE_CONTROL(4).BYPASS mode for debugging purposes. In this
+ mode, all packets will be sent to the host port only.
+ * - ``switch_mode``
+ - Boolean
+ - runtime
+ - Enable switch mode
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9633,6 +9633,7 @@ S: Maintained
F: drivers/net/dsa/mv88e6xxx/
F: include/linux/platform_data/mv88e6xxx.h
F: Documentation/devicetree/bindings/net/dsa/marvell.txt
+F: Documentation/networking/devlink/mv88e6xxx.rst
MARVELL ARMADA DRM SUPPORT
M: Russell King <linux@armlinux.org.uk>