From: Jason Gunthorpe <jgg@mellanox.com>
Date: Fri, 27 Mar 2020 17:00:16 -0300
Subject: mm/hmm: remove HMM_FAULT_SNAPSHOT
Git-commit: 6bfef2f9194519ca23dee405a9f4db461a7a7826
Patch-mainline: v5.7-rc1
References: jsc#SLE-16387

Now that flags are handled on a fine-grained per-page basis this global
flag is redundant and has a confusing overlap with the pfn_flags_mask and
default_flags.

Normalize the HMM_FAULT_SNAPSHOT behavior into one place. Callers needing
the SNAPSHOT behavior should set a pfn_flags_mask and default_flags that
always results in a cleared HMM_PFN_VALID. Then no pages will be faulted,
and HMM_FAULT_SNAPSHOT is not a special flow that overrides the masking
mechanism.

As this is the last flag, also remove the flags argument. If future flags
are needed they can be part of the struct hmm_range function arguments.

Link: https://lore.kernel.org/r/20200327200021.29372-5-jgg@ziepe.ca
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
---
 Documentation/vm/hmm.rst                |   12 +++++-------
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c |    2 +-
 drivers/gpu/drm/nouveau/nouveau_svm.c   |    2 +-
 include/linux/hmm.h                     |    5 +----
 mm/hmm.c                                |   17 +++++++++--------
 5 files changed, 17 insertions(+), 21 deletions(-)

--- a/Documentation/vm/hmm.rst
+++ b/Documentation/vm/hmm.rst
@@ -161,13 +161,11 @@ device must complete the update before t
 When the device driver wants to populate a range of virtual addresses, it can
 use::
 
-  long hmm_range_fault(struct hmm_range *range, unsigned int flags);
+  long hmm_range_fault(struct hmm_range *range);
 
-With the HMM_RANGE_SNAPSHOT flag, it will only fetch present CPU page table
-entries and will not trigger a page fault on missing or non-present entries.
-Without that flag, it does trigger a page fault on missing or read-only entries
-if write access is requested (see below). Page faults use the generic mm page
-fault code path just like a CPU page fault.
+It will trigger a page fault on missing or read-only entries if write access is
+requested (see below). Page faults use the generic mm page fault code path just
+like a CPU page fault.
 
 Both functions copy CPU page table entries into their pfns array argument. Each
 entry in that array corresponds to an address in the virtual range. HMM
@@ -197,7 +195,7 @@ The usage pattern is::
  again:
       range.notifier_seq = mmu_interval_read_begin(&interval_sub);
       down_read(&mm->mmap_sem);
-      ret = hmm_range_fault(&range, HMM_RANGE_SNAPSHOT);
+      ret = hmm_range_fault(&range);
       if (ret) {
           up_read(&mm->mmap_sem);
           if (ret == -EBUSY)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -856,7 +856,7 @@ retry:
 	range->notifier_seq = mmu_interval_read_begin(&bo->notifier);
 
 	down_read(&mm->mmap_sem);
-	r = hmm_range_fault(range, 0);
+	r = hmm_range_fault(range);
 	up_read(&mm->mmap_sem);
 	if (unlikely(r <= 0)) {
 		/*
--- a/drivers/gpu/drm/nouveau/nouveau_svm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_svm.c
@@ -540,7 +540,7 @@ static int nouveau_range_fault(struct no
 		range.default_flags = 0;
 		range.pfn_flags_mask = -1UL;
 		down_read(&mm->mmap_sem);
-		ret = hmm_range_fault(&range, 0);
+		ret = hmm_range_fault(&range);
 		up_read(&mm->mmap_sem);
 		if (ret <= 0) {
 			if (ret == 0 || ret == -EBUSY)
--- a/include/linux/hmm.h
+++ b/include/linux/hmm.h
@@ -117,13 +117,10 @@ static inline struct page *hmm_device_en
 	return pfn_to_page(entry >> range->pfn_shift);
 }
 
-/* Don't fault in missing PTEs, just snapshot the current state. */
-#define HMM_FAULT_SNAPSHOT		(1 << 1)
-
 /*
  * Please see Documentation/vm/hmm.rst for how to use the range API.
  */
-long hmm_range_fault(struct hmm_range *range, unsigned int flags);
+long hmm_range_fault(struct hmm_range *range);
 
 /*
  * HMM_RANGE_DEFAULT_TIMEOUT - default timeout (ms) when waiting for a range
--- a/mm/hmm.c
+++ b/mm/hmm.c
@@ -29,7 +29,6 @@
 struct hmm_vma_walk {
 	struct hmm_range	*range;
 	unsigned long		last;
-	unsigned int		flags;
 };
 
 enum {
@@ -112,9 +111,6 @@ static unsigned int hmm_pte_need_fault(c
 {
 	struct hmm_range *range = hmm_vma_walk->range;
 
-	if (hmm_vma_walk->flags & HMM_FAULT_SNAPSHOT)
-		return 0;
-
 	/*
 	 * So we not only consider the individual per page request we also
 	 * consider the default flags requested for the range. The API can
@@ -147,10 +143,17 @@ hmm_range_need_fault(const struct hmm_vm
 		     const uint64_t *pfns, unsigned long npages,
 		     uint64_t cpu_flags)
 {
+	struct hmm_range *range = hmm_vma_walk->range;
 	unsigned int required_fault = 0;
 	unsigned long i;
 
-	if (hmm_vma_walk->flags & HMM_FAULT_SNAPSHOT)
+	/*
+	 * If the default flags do not request to fault pages, and the mask does
+	 * not allow for individual pages to be faulted, then
+	 * hmm_pte_need_fault() will always return 0.
+	 */
+	if (!((range->default_flags | range->pfn_flags_mask) &
+	      range->flags[HMM_PFN_VALID]))
 		return 0;
 
 	for (i = 0; i < npages; ++i) {
@@ -557,7 +560,6 @@ static const struct mm_walk_ops hmm_walk
 /**
  * hmm_range_fault - try to fault some address in a virtual address range
  * @range:	argument structure
- * @flags:	HMM_FAULT_* flags
  *
  * Return: the number of valid pages in range->pfns[] (from range start
  * address), which may be zero.  On error one of the following status codes
@@ -579,12 +581,11 @@ static const struct mm_walk_ops hmm_walk
  * On error, for one virtual address in the range, the function will mark the
  * corresponding HMM pfn entry with an error flag.
  */
-long hmm_range_fault(struct hmm_range *range, unsigned int flags)
+long hmm_range_fault(struct hmm_range *range)
 {
 	struct hmm_vma_walk hmm_vma_walk = {
 		.range = range,
 		.last = range->start,
-		.flags = flags,
 	};
 	struct mm_struct *mm = range->notifier->mm;
 	int ret;