From: Maxim Mikityanskiy <maximmi@mellanox.com>
Date: Thu, 11 Jun 2020 14:25:19 +0300
Subject: net/mlx5e: Use synchronize_rcu to sync with NAPI
Patch-mainline: v5.9-rc7
Git-commit: 9c25a22dfb00270372224721fed646965420323a
References: jsc#SLE-15172
As described in the previous commit, napi_synchronize doesn't quite fit
the purpose when we just need to wait until the currently running NAPI
quits. Its implementation waits until NAPI is not running by polling and
waiting for 1ms in between. In cases where we need to deactivate one
queue (e.g., recovery flows) or where we deactivate them one-by-one
(deactivate channel flow), we may get stuck in napi_synchronize forever
if other queues keep NAPI active, causing a soft lockup. Depending on
kernel configuration (CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC), it may result
in a kernel panic.
To fix the issue, use synchronize_rcu to wait for NAPI to quit, and wrap
the whole NAPI in rcu_read_lock.
Fixes: acc6c5953af1 ("net/mlx5e: Split open/close channels to stages")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c | 14 ++------------
drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c | 3 +--
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 12 ++++--------
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 12 ++----------
drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c | 17 +++++++++++++----
5 files changed, 22 insertions(+), 36 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c
@@ -31,7 +31,6 @@ struct sk_buff *mlx5e_xsk_skb_from_cqe_m
{
struct xdp_buff *xdp = wi->umr.dma_info[page_idx].xsk;
u32 cqe_bcnt32 = cqe_bcnt;
- bool consumed;
/* Check packet size. Note LRO doesn't use linear SKB */
if (unlikely(cqe_bcnt > rq->hw_mtu)) {
@@ -51,10 +50,6 @@ struct sk_buff *mlx5e_xsk_skb_from_cqe_m
xsk_buff_dma_sync_for_cpu(xdp);
prefetch(xdp->data);
- rcu_read_lock();
- consumed = mlx5e_xdp_handle(rq, NULL, &cqe_bcnt32, xdp);
- rcu_read_unlock();
-
/* Possible flows:
* - XDP_REDIRECT to XSKMAP:
* The page is owned by the userspace from now.
@@ -70,7 +65,7 @@ struct sk_buff *mlx5e_xsk_skb_from_cqe_m
* allocated first from the Reuse Ring, so it has enough space.
*/
- if (likely(consumed)) {
+ if (likely(mlx5e_xdp_handle(rq, NULL, &cqe_bcnt32, xdp))) {
if (likely(__test_and_clear_bit(MLX5E_RQ_FLAG_XDP_XMIT, rq->flags)))
__set_bit(page_idx, wi->xdp_xmit_bitmap); /* non-atomic */
return NULL; /* page/packet was consumed by XDP */
@@ -88,7 +83,6 @@ struct sk_buff *mlx5e_xsk_skb_from_cqe_l
u32 cqe_bcnt)
{
struct xdp_buff *xdp = wi->di->xsk;
- bool consumed;
/* wi->offset is not used in this function, because xdp->data and the
* DMA address point directly to the necessary place. Furthermore, the
@@ -107,11 +101,7 @@ struct sk_buff *mlx5e_xsk_skb_from_cqe_l
return NULL;
}
- rcu_read_lock();
- consumed = mlx5e_xdp_handle(rq, NULL, &cqe_bcnt, xdp);
- rcu_read_unlock();
-
- if (likely(consumed))
+ if (likely(mlx5e_xdp_handle(rq, NULL, &cqe_bcnt, xdp)))
return NULL; /* page/packet was consumed by XDP */
/* XDP_PASS: copy the data from the UMEM to a new SKB. The frame reuse
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c
@@ -106,8 +106,7 @@ err_free_cparam:
void mlx5e_close_xsk(struct mlx5e_channel *c)
{
clear_bit(MLX5E_CHANNEL_STATE_XSK, c->state);
- napi_synchronize(&c->napi);
- synchronize_rcu(); /* Sync with the XSK wakeup. */
+ synchronize_rcu(); /* Sync with the XSK wakeup and with NAPI. */
mlx5e_close_rq(&c->xskrq);
mlx5e_close_cq(&c->xskrq.cq);
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -873,7 +873,7 @@ void mlx5e_activate_rq(struct mlx5e_rq *
void mlx5e_deactivate_rq(struct mlx5e_rq *rq)
{
clear_bit(MLX5E_RQ_STATE_ENABLED, &rq->state);
- napi_synchronize(&rq->channel->napi); /* prevent mlx5e_post_rx_wqes */
+ synchronize_rcu(); /* Sync with NAPI to prevent mlx5e_post_rx_wqes. */
}
void mlx5e_close_rq(struct mlx5e_rq *rq)
@@ -1318,12 +1318,10 @@ void mlx5e_tx_disable_queue(struct netde
static void mlx5e_deactivate_txqsq(struct mlx5e_txqsq *sq)
{
- struct mlx5e_channel *c = sq->channel;
struct mlx5_wq_cyc *wq = &sq->wq;
clear_bit(MLX5E_SQ_STATE_ENABLED, &sq->state);
- /* prevent netif_tx_wake_queue */
- napi_synchronize(&c->napi);
+ synchronize_rcu(); /* Sync with NAPI to prevent netif_tx_wake_queue. */
mlx5e_tx_disable_queue(sq->txq);
@@ -1398,10 +1396,8 @@ void mlx5e_activate_icosq(struct mlx5e_i
void mlx5e_deactivate_icosq(struct mlx5e_icosq *icosq)
{
- struct mlx5e_channel *c = icosq->channel;
-
clear_bit(MLX5E_SQ_STATE_ENABLED, &icosq->state);
- napi_synchronize(&c->napi);
+ synchronize_rcu(); /* Sync with NAPI. */
}
void mlx5e_close_icosq(struct mlx5e_icosq *sq)
@@ -1480,7 +1476,7 @@ void mlx5e_close_xdpsq(struct mlx5e_xdps
struct mlx5e_channel *c = sq->channel;
clear_bit(MLX5E_SQ_STATE_ENABLED, &sq->state);
- napi_synchronize(&c->napi);
+ synchronize_rcu(); /* Sync with NAPI. */
mlx5e_destroy_sq(c->mdev, sq->sqn);
mlx5e_free_xdpsq_descs(sq);
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -1132,7 +1132,6 @@ mlx5e_skb_from_cqe_linear(struct mlx5e_r
struct xdp_buff xdp;
struct sk_buff *skb;
void *va, *data;
- bool consumed;
u32 frag_size;
va = page_address(di->page) + wi->offset;
@@ -1144,11 +1143,8 @@ mlx5e_skb_from_cqe_linear(struct mlx5e_r
prefetchw(va); /* xdp_frame data area */
prefetch(data);
- rcu_read_lock();
mlx5e_fill_xdp_buff(rq, va, rx_headroom, cqe_bcnt, &xdp);
- consumed = mlx5e_xdp_handle(rq, di, &cqe_bcnt, &xdp);
- rcu_read_unlock();
- if (consumed)
+ if (mlx5e_xdp_handle(rq, di, &cqe_bcnt, &xdp))
return NULL; /* page/packet was consumed by XDP */
rx_headroom = xdp.data - xdp.data_hard_start;
@@ -1438,7 +1434,6 @@ mlx5e_skb_from_cqe_mpwrq_linear(struct m
struct sk_buff *skb;
void *va, *data;
u32 frag_size;
- bool consumed;
/* Check packet size. Note LRO doesn't use linear SKB */
if (unlikely(cqe_bcnt > rq->hw_mtu)) {
@@ -1455,11 +1450,8 @@ mlx5e_skb_from_cqe_mpwrq_linear(struct m
prefetchw(va); /* xdp_frame data area */
prefetch(data);
- rcu_read_lock();
mlx5e_fill_xdp_buff(rq, va, rx_headroom, cqe_bcnt32, &xdp);
- consumed = mlx5e_xdp_handle(rq, di, &cqe_bcnt32, &xdp);
- rcu_read_unlock();
- if (consumed) {
+ if (mlx5e_xdp_handle(rq, di, &cqe_bcnt32, &xdp)) {
if (__test_and_clear_bit(MLX5E_RQ_FLAG_XDP_XMIT, rq->flags))
__set_bit(page_idx, wi->xdp_xmit_bitmap); /* non-atomic */
return NULL; /* page/packet was consumed by XDP */
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c
@@ -121,13 +121,17 @@ int mlx5e_napi_poll(struct napi_struct *
struct mlx5e_xdpsq *xsksq = &c->xsksq;
struct mlx5e_rq *xskrq = &c->xskrq;
struct mlx5e_rq *rq = &c->rq;
- bool xsk_open = test_bit(MLX5E_CHANNEL_STATE_XSK, c->state);
bool aff_change = false;
bool busy_xsk = false;
bool busy = false;
int work_done = 0;
+ bool xsk_open;
int i;
+ rcu_read_lock();
+
+ xsk_open = test_bit(MLX5E_CHANNEL_STATE_XSK, c->state);
+
ch_stats->poll++;
for (i = 0; i < c->num_tc; i++)
@@ -167,8 +171,10 @@ int mlx5e_napi_poll(struct napi_struct *
busy |= busy_xsk;
if (busy) {
- if (likely(mlx5e_channel_no_affinity_change(c)))
- return budget;
+ if (likely(mlx5e_channel_no_affinity_change(c))) {
+ work_done = budget;
+ goto out;
+ }
ch_stats->aff_change++;
aff_change = true;
if (budget && work_done == budget)
@@ -176,7 +182,7 @@ int mlx5e_napi_poll(struct napi_struct *
}
if (unlikely(!napi_complete_done(napi, work_done)))
- return work_done;
+ goto out;
ch_stats->arm++;
@@ -203,6 +209,9 @@ int mlx5e_napi_poll(struct napi_struct *
ch_stats->force_irq++;
}
+out:
+ rcu_read_unlock();
+
return work_done;
}