From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Sun, 10 Nov 2019 14:07:09 +0000
Subject: net: sfp: ensure TX_FAULT has deasserted before probing the PHY
Patch-mainline: v5.5-rc1
Git-commit: d23751a094012f7d0d7b6fb694f3c1ecb19e4a41
References: bsc#1154353
TX_FAULT should be deasserted to indicate that the module has completed
its initialisation. This may include the on-board PHY, so wait until
the module has deasserted TX_FAULT before probing the PHY.
This means that we need an extra state to handle a TX_FAULT that
remains set for longer than t_init, since using the existing handling
state would bypass the PHY probe.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/phy/sfp.c | 31 +++++++++++++++++++++++++------
1 file changed, 25 insertions(+), 6 deletions(-)
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -56,6 +56,7 @@ enum {
SFP_S_DOWN = 0,
SFP_S_WAIT,
SFP_S_INIT,
+ SFP_S_INIT_TX_FAULT,
SFP_S_WAIT_LOS,
SFP_S_LINK_UP,
SFP_S_TX_FAULT,
@@ -113,6 +114,7 @@ static const char * const sm_state_strin
[SFP_S_DOWN] = "down",
[SFP_S_WAIT] = "wait",
[SFP_S_INIT] = "init",
+ [SFP_S_INIT_TX_FAULT] = "init_tx_fault",
[SFP_S_WAIT_LOS] = "wait_los",
[SFP_S_LINK_UP] = "link_up",
[SFP_S_TX_FAULT] = "tx_fault",
@@ -1597,8 +1599,6 @@ static void sfp_sm_main(struct sfp *sfp,
if (event != SFP_E_TIMEOUT)
break;
- sfp_sm_probe_for_phy(sfp);
-
if (sfp->state & SFP_F_TX_FAULT) {
/* Wait t_init before indicating that the link is up,
* provided the current state indicates no TX_FAULT. If
@@ -1620,10 +1620,29 @@ static void sfp_sm_main(struct sfp *sfp,
break;
case SFP_S_INIT:
- if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT)
- sfp_sm_fault(sfp, SFP_S_TX_FAULT, true);
- else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR)
- init_done: sfp_sm_link_check_los(sfp);
+ if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
+ /* TX_FAULT is still asserted after t_init, so assume
+ * there is a fault.
+ */
+ sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
+ sfp->sm_retries == 5);
+ } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
+ init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT
+ * clear. Probe for the PHY and check the LOS state.
+ */
+ sfp_sm_probe_for_phy(sfp);
+ sfp_sm_link_check_los(sfp);
+
+ /* Reset the fault retry count */
+ sfp->sm_retries = 5;
+ }
+ break;
+
+ case SFP_S_INIT_TX_FAULT:
+ if (event == SFP_E_TIMEOUT) {
+ sfp_module_tx_fault_reset(sfp);
+ sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
+ }
break;
case SFP_S_WAIT_LOS: