From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Date: Thu, 26 Dec 2019 06:13:25 -0500
Subject: [PATCH] scsi: mpt3sas: Add support for NVMe shutdown
Git-commit: d3f623ae8e0323ca434ee9029100312a8be37773
Patch-mainline: v5.6-rc1
References: jsc#SLE-10717
Introduce function _scsih_nvme_shutdown() to issue IO Unit Control message
to IOC firmware with operation code 'shutdown'. This causes IOC firmware to
issue NVMe shutdown commands to all NVMe drives attached to it.
NVMe Shutdown:
NVMe devices need to have a specific shutdown sequence performed before
power is removed. For this, the IOC firmware needs to be notified when the
system is being shutdown. So during the system shutdown time, driver issues
an IO Unit Control request with operation code MPI26_CTRL_OP_SHUTDOWN to
inform firmware that a shutdown is initiated.
This shutdown command is issued only if NVMe devices are attached to the
controller.
During each NVMe device addition, driver reads pcie device page2 to get
shutdown latency (e.g. drive's RTD3 Entry Latency) and updates the max
latency value among the added NVMe drives in ioc->max_shutdown_latency.
This is used as the timeout value for IO Unit Control command at the time
of shutdown.
When a NVMe drive is removed and its shutdown latency matches which
ioc->max_shutdown_latency then ioc->max_shutdown_latency is updated to next
max value (by iterating over the list of available devices). If the
shutdown latency is 0, then default timeout is set to six seconds.
Link: https://lore.kernel.org/r/20191226111333.26131-3-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/mpt3sas/mpt3sas_base.h | 9 ++-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 134 +++++++++++++++++++++++++++++++++++
2 files changed, 142 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 4ebf81ea4d2f..00c1247a0a70 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -140,6 +140,7 @@
#define MAX_CHAIN_ELEMT_SZ 16
#define DEFAULT_NUM_FWCHAIN_ELEMTS 8
+#define IO_UNIT_CONTROL_SHUTDOWN_TIMEOUT 6
#define FW_IMG_HDR_READ_TIMEOUT 15
#define IOC_OPERATIONAL_WAIT_COUNT 10
@@ -589,6 +590,7 @@ static inline void sas_device_put(struct _sas_device *s)
* @connector_name: ASCII value of the Connector's name
* @serial_number: pointer of serial number string allocated runtime
* @access_status: Device's Access Status
+ * @shutdown_latency: NVMe device's RTD3 Entry Latency
* @refcount: reference count for deletion
*/
struct _pcie_device {
@@ -611,6 +613,7 @@ struct _pcie_device {
u8 *serial_number;
u8 reset_timeout;
u8 access_status;
+ u16 shutdown_latency;
struct kref refcount;
};
/**
@@ -1073,6 +1076,10 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
* @event_context: unique id for each logged event
* @event_log: event log pointer
* @event_masks: events that are masked
+ * @max_shutdown_latency: timeout value for NVMe shutdown operation,
+ * which is equal that NVMe drive's RTD3 Entry Latency
+ * which has reported maximum RTD3 Entry Latency value
+ * among attached NVMe drives.
* @facts: static facts data
* @prev_fw_facts: previous fw facts data
* @pfacts: static port facts data
@@ -1283,7 +1290,7 @@ struct MPT3SAS_ADAPTER {
u8 tm_custom_handling;
u8 nvme_abort_timeout;
-
+ u16 max_shutdown_latency;
/* static config pages */
struct mpt3sas_facts facts;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index a038be8a0e90..5dd696a4c75c 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -1049,6 +1049,34 @@ mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
return pcie_device;
}
+/**
+ * _scsih_set_nvme_max_shutdown_latency - Update max_shutdown_latency.
+ * @ioc: per adapter object
+ * Context: This function will acquire ioc->pcie_device_lock
+ *
+ * Update ioc->max_shutdown_latency to that NVMe drives RTD3 Entry Latency
+ * which has reported maximum among all available NVMe drives.
+ * Minimum max_shutdown_latency will be six seconds.
+ */
+static void
+_scsih_set_nvme_max_shutdown_latency(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct _pcie_device *pcie_device;
+ unsigned long flags;
+ u16 shutdown_latency = IO_UNIT_CONTROL_SHUTDOWN_TIMEOUT;
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ list_for_each_entry(pcie_device, &ioc->pcie_device_list, list) {
+ if (pcie_device->shutdown_latency) {
+ if (shutdown_latency < pcie_device->shutdown_latency)
+ shutdown_latency =
+ pcie_device->shutdown_latency;
+ }
+ }
+ ioc->max_shutdown_latency = shutdown_latency;
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+}
+
/**
* _scsih_pcie_device_remove - remove pcie_device from list.
* @ioc: per adapter object
@@ -1063,6 +1091,7 @@ _scsih_pcie_device_remove(struct MPT3SAS_ADAPTER *ioc,
{
unsigned long flags;
int was_on_pcie_device_list = 0;
+ u8 update_latency = 0;
if (!pcie_device)
return;
@@ -1082,11 +1111,21 @@ _scsih_pcie_device_remove(struct MPT3SAS_ADAPTER *ioc,
list_del_init(&pcie_device->list);
was_on_pcie_device_list = 1;
}
+ if (pcie_device->shutdown_latency == ioc->max_shutdown_latency)
+ update_latency = 1;
spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
if (was_on_pcie_device_list) {
kfree(pcie_device->serial_number);
pcie_device_put(pcie_device);
}
+
+ /*
+ * This device's RTD3 Entry Latency matches IOC's
+ * max_shutdown_latency. Recalculate IOC's max_shutdown_latency
+ * from the available drives as current drive is getting removed.
+ */
+ if (update_latency)
+ _scsih_set_nvme_max_shutdown_latency(ioc);
}
@@ -1101,6 +1140,7 @@ _scsih_pcie_device_remove_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
struct _pcie_device *pcie_device;
unsigned long flags;
int was_on_pcie_device_list = 0;
+ u8 update_latency = 0;
if (ioc->shost_recovery)
return;
@@ -1113,12 +1153,22 @@ _scsih_pcie_device_remove_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
was_on_pcie_device_list = 1;
pcie_device_put(pcie_device);
}
+ if (pcie_device->shutdown_latency == ioc->max_shutdown_latency)
+ update_latency = 1;
}
spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
if (was_on_pcie_device_list) {
_scsih_pcie_device_remove_from_sml(ioc, pcie_device);
pcie_device_put(pcie_device);
}
+
+ /*
+ * This device's RTD3 Entry Latency matches IOC's
+ * max_shutdown_latency. Recalculate IOC's max_shutdown_latency
+ * from the available drives as current drive is getting removed.
+ */
+ if (update_latency)
+ _scsih_set_nvme_max_shutdown_latency(ioc);
}
/**
@@ -6933,6 +6983,16 @@ _scsih_pcie_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
le32_to_cpu(pcie_device_pg0.DeviceInfo)))) {
pcie_device->nvme_mdts =
le32_to_cpu(pcie_device_pg2.MaximumDataTransferSize);
+ pcie_device->shutdown_latency =
+ le16_to_cpu(pcie_device_pg2.ShutdownLatency);
+ /*
+ * Set IOC's max_shutdown_latency to drive's RTD3 Entry Latency
+ * if drive's RTD3 Entry Latency is greater then IOC's
+ * max_shutdown_latency.
+ */
+ if (pcie_device->shutdown_latency > ioc->max_shutdown_latency)
+ ioc->max_shutdown_latency =
+ pcie_device->shutdown_latency;
if (pcie_device_pg2.ControllerResetTO)
pcie_device->reset_timeout =
pcie_device_pg2.ControllerResetTO;
@@ -9357,6 +9417,7 @@ _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
}
_scsih_remove_unresponding_devices(ioc);
_scsih_scan_for_devices_after_reset(ioc);
+ _scsih_set_nvme_max_shutdown_latency(ioc);
break;
case MPT3SAS_PORT_ENABLE_COMPLETE:
ioc->start_scan = 0;
@@ -9659,6 +9720,75 @@ _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc,
kfree(sas_expander);
}
+/**
+ * _scsih_nvme_shutdown - NVMe shutdown notification
+ * @ioc: per adapter object
+ *
+ * Sending IoUnitControl request with shutdown operation code to alert IOC that
+ * the host system is shutting down so that IOC can issue NVMe shutdown to
+ * NVMe drives attached to it.
+ */
+static void
+_scsih_nvme_shutdown(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi26IoUnitControlRequest_t *mpi_request;
+ Mpi26IoUnitControlReply_t *mpi_reply;
+ u16 smid;
+
+ /* are there any NVMe devices ? */
+ if (list_empty(&ioc->pcie_device_list))
+ return;
+
+ mutex_lock(&ioc->scsih_cmds.mutex);
+
+ if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) {
+ ioc_err(ioc, "%s: scsih_cmd in use\n", __func__);
+ goto out;
+ }
+
+ ioc->scsih_cmds.status = MPT3_CMD_PENDING;
+
+ smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx);
+ if (!smid) {
+ ioc_err(ioc,
+ "%s: failed obtaining a smid\n", __func__);
+ ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+ goto out;
+ }
+
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+ ioc->scsih_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi26IoUnitControlRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_IO_UNIT_CONTROL;
+ mpi_request->Operation = MPI26_CTRL_OP_SHUTDOWN;
+
+ init_completion(&ioc->scsih_cmds.done);
+ ioc->put_smid_default(ioc, smid);
+ /* Wait for max_shutdown_latency seconds */
+ ioc_info(ioc,
+ "Io Unit Control shutdown (sending), Shutdown latency %d sec\n",
+ ioc->max_shutdown_latency);
+ wait_for_completion_timeout(&ioc->scsih_cmds.done,
+ ioc->max_shutdown_latency*HZ);
+
+ if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
+ ioc_err(ioc, "%s: timeout\n", __func__);
+ goto out;
+ }
+
+ if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
+ mpi_reply = ioc->scsih_cmds.reply;
+ ioc_info(ioc, "Io Unit Control shutdown (complete):"
+ "ioc_status(0x%04x), loginfo(0x%08x)\n",
+ le16_to_cpu(mpi_reply->IOCStatus),
+ le32_to_cpu(mpi_reply->IOCLogInfo));
+ }
+ out:
+ ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+ mutex_unlock(&ioc->scsih_cmds.mutex);
+}
+
+
/**
* _scsih_ir_shutdown - IR shutdown notification
* @ioc: per adapter object
@@ -9851,6 +9981,7 @@ scsih_shutdown(struct pci_dev *pdev)
&ioc->ioc_pg1_copy);
_scsih_ir_shutdown(ioc);
+ _scsih_nvme_shutdown(ioc);
mpt3sas_base_detach(ioc);
}
@@ -10533,6 +10664,8 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx;
ioc->logging_level = logging_level;
ioc->schedule_dead_ioc_flush_running_cmds = &_scsih_flush_running_cmds;
+ /* Host waits for minimum of six seconds */
+ ioc->max_shutdown_latency = IO_UNIT_CONTROL_SHUTDOWN_TIMEOUT;
/*
* Enable MEMORY MOVE support flag.
*/
@@ -10681,6 +10814,7 @@ scsih_suspend(struct pci_dev *pdev, pm_message_t state)
mpt3sas_base_stop_watchdog(ioc);
flush_scheduled_work();
scsi_block_requests(shost);
+ _scsih_nvme_shutdown(ioc);
device_state = pci_choose_state(pdev, state);
ioc_info(ioc, "pdev=0x%p, slot=%s, entering operating state [D%d]\n",
pdev, pci_name(pdev), device_state);
--
2.16.4