From 5fdbe136ae19ab751daaa4d08d9a42f3e30d17f9 Mon Sep 17 00:00:00 2001
From: Matthew Howell <matthew.howell@sealevel.com>
Date: Wed, 22 Jul 2020 16:11:24 -0400
Subject: [PATCH] serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X
Git-commit: 5fdbe136ae19ab751daaa4d08d9a42f3e30d17f9
Patch-mainline: v5.8-rc7
References: git-fixes
Sealevel XR17V35X based devices are inoperable on kernel versions
4.11 and above due to a change in the GPIO preconfiguration introduced in
commit
7dea8165f1d. This patch fixes this by preconfiguring the GPIO on Sealevel
cards to the value (0x00) used prior to commit 7dea8165f1d
With GPIOs preconfigured as per commit 7dea8165f1d all ports on
Sealevel XR17V35X based devices become stuck in high impedance
mode, regardless of dip-switch or software configuration. This
causes the device to become effectively unusable. This patch (in
various forms) has been distributed to our customers and no issues
related to it have been reported.
Fixes: 7dea8165f1d6 ("serial: exar: Preconfigure xr17v35x MPIOs as output")
Signed-off-by: Matthew Howell <matthew.howell@sealevel.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2007221605270.13247@tstest-VirtualBox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
---
drivers/tty/serial/8250/8250_exar.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index ddb6aeb76dc5..04b9af7ed941 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -326,7 +326,17 @@ static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p)
* devices will export them as GPIOs, so we pre-configure them safely
* as inputs.
*/
- u8 dir = pcidev->vendor == PCI_VENDOR_ID_EXAR ? 0xff : 0x00;
+
+ u8 dir = 0x00;
+
+ if ((pcidev->vendor == PCI_VENDOR_ID_EXAR) &&
+ (pcidev->subsystem_vendor != PCI_VENDOR_ID_SEALEVEL)) {
+ // Configure GPIO as inputs for Commtech adapters
+ dir = 0xff;
+ } else {
+ // Configure GPIO as outputs for SeaLevel adapters
+ dir = 0x00;
+ }
writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
--
2.16.4