From: Andrii Nakryiko <andrii@kernel.org>
Date: Wed, 10 Nov 2021 21:36:17 -0800
Subject: selftests/bpf: Minor cleanups and normalization of Makefile
Patch-mainline: v5.17-rc1
Git-commit: de29e6bbb9ee674d639cd42fe565f28757208614
References: jsc#PED-1368
Few clean ups and single-line simplifications. Also split CLEAN command
into multiple $(RM) invocations as it gets dangerously close to too long
argument list. Make sure that -o <output.o> is used always as the last
argument for saner verbose make output.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211111053624.190580-3-andrii@kernel.org
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
---
tools/testing/selftests/bpf/Makefile | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -45,10 +45,8 @@ ifneq ($(BPF_GCC),)
TEST_GEN_PROGS += test_progs-bpf_gcc
endif
-TEST_GEN_FILES = test_lwt_ip_encap.o \
- test_tc_edt.o
-TEST_FILES = xsk_prereqs.sh \
- $(wildcard progs/btf_dump_test_case_*.c)
+TEST_GEN_FILES = test_lwt_ip_encap.o test_tc_edt.o
+TEST_FILES = xsk_prereqs.sh $(wildcard progs/btf_dump_test_case_*.c)
# Order correspond to 'make run_tests' order
TEST_PROGS := test_kmod.sh \
@@ -107,7 +105,10 @@ endif
OVERRIDE_TARGETS := 1
override define CLEAN
$(call msg,CLEAN)
- $(Q)$(RM) -r $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) $(EXTRA_CLEAN)
+ $(Q)$(RM) -r $(TEST_GEN_PROGS)
+ $(Q)$(RM) -r $(TEST_GEN_PROGS_EXTENDED)
+ $(Q)$(RM) -r $(TEST_GEN_FILES)
+ $(Q)$(RM) -r $(EXTRA_CLEAN)
$(Q)$(MAKE) -C bpf_testmod clean
$(Q)$(MAKE) docs-clean
endef
@@ -169,7 +170,7 @@ $(OUTPUT)/%:%.c
$(OUTPUT)/urandom_read: urandom_read.c
$(call msg,BINARY,,$@)
- $(Q)$(CC) $(LDFLAGS) -o $@ $< $(LDLIBS) -Wl,--build-id=sha1
+ $(Q)$(CC) $(LDFLAGS) $< $(LDLIBS) -Wl,--build-id=sha1 -o $@
$(OUTPUT)/bpf_testmod.ko: $(VMLINUX_BTF) $(wildcard bpf_testmod/Makefile bpf_testmod/*.[ch])
$(call msg,MOD,,$@)
@@ -232,16 +233,16 @@ docs-clean:
prefix= OUTPUT=$(OUTPUT)/ DESTDIR=$(OUTPUT)/ $@
$(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \
- ../../../include/uapi/linux/bpf.h \
+ $(APIDIR)/linux/bpf.h \
| $(BUILD_DIR)/libbpf
$(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/ \
EXTRA_CFLAGS='-g -O0' \
DESTDIR=$(SCRATCH_DIR) prefix= all install_headers
ifneq ($(BPFOBJ),$(HOST_BPFOBJ))
-$(HOST_BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \
- ../../../include/uapi/linux/bpf.h \
- | $(HOST_BUILD_DIR)/libbpf
+$(HOST_BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \
+ $(APIDIR)/linux/bpf.h \
+ | $(HOST_BUILD_DIR)/libbpf
$(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) \
EXTRA_CFLAGS='-g -O0' \
OUTPUT=$(HOST_BUILD_DIR)/libbpf/ CC=$(HOSTCC) LD=$(HOSTLD) \
@@ -305,12 +306,12 @@ $(OUTPUT)/flow_dissector_load.o: flow_di
# $3 - CFLAGS
define CLANG_BPF_BUILD_RULE
$(call msg,CLNG-BPF,$(TRUNNER_BINARY),$2)
- $(Q)$(CLANG) $3 -O2 -target bpf -c $1 -o $2 -mcpu=v3
+ $(Q)$(CLANG) $3 -O2 -target bpf -c $1 -mcpu=v3 -o $2
endef
# Similar to CLANG_BPF_BUILD_RULE, but with disabled alu32
define CLANG_NOALU32_BPF_BUILD_RULE
$(call msg,CLNG-BPF,$(TRUNNER_BINARY),$2)
- $(Q)$(CLANG) $3 -O2 -target bpf -c $1 -o $2 -mcpu=v2
+ $(Q)$(CLANG) $3 -O2 -target bpf -c $1 -mcpu=v2 -o $2
endef
# Build BPF object using GCC
define GCC_BPF_BUILD_RULE
@@ -472,13 +473,12 @@ TRUNNER_TESTS_DIR := prog_tests
TRUNNER_BPF_PROGS_DIR := progs
TRUNNER_EXTRA_SOURCES := test_progs.c cgroup_helpers.c trace_helpers.c \
network_helpers.c testing_helpers.c \
- btf_helpers.c flow_dissector_load.h
+ btf_helpers.c flow_dissector_load.h
TRUNNER_EXTRA_FILES := $(OUTPUT)/urandom_read $(OUTPUT)/bpf_testmod.ko \
ima_setup.sh \
$(wildcard progs/btf_dump_test_case_*.c)
TRUNNER_BPF_BUILD_RULE := CLANG_BPF_BUILD_RULE
-TRUNNER_BPF_CFLAGS := $(BPF_CFLAGS) $(CLANG_CFLAGS)
-TRUNNER_BPF_CFLAGS += -DENABLE_ATOMICS_TESTS
+TRUNNER_BPF_CFLAGS := $(BPF_CFLAGS) $(CLANG_CFLAGS) -DENABLE_ATOMICS_TESTS
$(eval $(call DEFINE_TEST_RUNNER,test_progs))
# Define test_progs-no_alu32 test runner.
@@ -540,7 +540,7 @@ $(OUTPUT)/bench: $(OUTPUT)/bench.o $(OUT
$(OUTPUT)/bench_ringbufs.o \
$(OUTPUT)/bench_bloom_filter_map.o
$(call msg,BINARY,,$@)
- $(Q)$(CC) $(LDFLAGS) -o $@ $(filter %.a %.o,$^) $(LDLIBS)
+ $(Q)$(CC) $(LDFLAGS) $(filter %.a %.o,$^) $(LDLIBS) -o $@
EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) $(SCRATCH_DIR) $(HOST_SCRATCH_DIR) \
prog_tests/tests.h map_tests/tests.h verifier/tests.h \