From c35b518f9ba06c9de79fb3ff62eed7462d804995 Mon Sep 17 00:00:00 2001
From: Marcel Ziswiler <marcel@ziswiler.com>
Date: Fri, 23 Feb 2018 00:04:51 +0100
Subject: [PATCH] clk: tegra: Fix pll_u rate configuration
Git-commit: c35b518f9ba06c9de79fb3ff62eed7462d804995
Patch-mainline: v4.17-rc1
References: bsc#1051510
Turns out latest upstream U-Boot does not configure/enable pll_u which
leaves it at some default rate of 500 kHz:
root@apalis-t30:~# cat /sys/kernel/debug/clk/clk_summary | grep pll_u
pll_u 3 3 0 500000 0
Of course this won't quite work leading to the following messages:
[ 6.559593] usb 2-1: new full-speed USB device number 2 using tegra-
ehci
[ 11.759173] usb 2-1: device descriptor read/64, error -110
[ 27.119453] usb 2-1: device descriptor read/64, error -110
[ 27.389217] usb 2-1: new full-speed USB device number 3 using tegra-
ehci
[ 32.559454] usb 2-1: device descriptor read/64, error -110
[ 47.929777] usb 2-1: device descriptor read/64, error -110
[ 48.049658] usb usb2-port1: attempt power cycle
[ 48.759475] usb 2-1: new full-speed USB device number 4 using tegra-
ehci
[ 59.349457] usb 2-1: device not accepting address 4, error -110
[ 59.509449] usb 2-1: new full-speed USB device number 5 using tegra-
ehci
[ 70.069457] usb 2-1: device not accepting address 5, error -110
[ 70.079721] usb usb2-port1: unable to enumerate USB device
Fix this by actually allowing the rate also being set from within
the Linux kernel.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
---
drivers/clk/tegra/clk-pll.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 7c369e21c91c..830d1c87fa7c 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -1151,6 +1151,8 @@ static const struct clk_ops tegra_clk_pllu_ops = {
.enable = clk_pllu_enable,
.disable = clk_pll_disable,
.recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_round_rate,
+ .set_rate = clk_pll_set_rate,
};
static int _pll_fixed_mdiv(struct tegra_clk_pll_params *pll_params,
--
2.18.0