From bd9f3dcf42d943b53190f99bcdbcfe98a56ac4cd Mon Sep 17 00:00:00 2001
From: Douglas Anderson <dianders@chromium.org>
Date: Mon, 29 Aug 2022 09:49:47 -0700
Subject: [PATCH] arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
Git-commit: bd9f3dcf42d943b53190f99bcdbcfe98a56ac4cd
Patch-mainline: v6.1-rc6
References: git-fixes
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
Note: while here, let's also remove the nonsensical
"regulator-allow-set-load" on the fixed regulator "vreg_s4a_1p8".
[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
Fixes: 5b85e8f2225c ("arm64: dts: qcom: sa8155p-adp: Add base dts file")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220829094903.v2.1.Id59c32b560c4662d8b3697de2bd494d08d654806@changeid
Acked-by: Takashi Iwai <tiwai@suse.de>
---
arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 87ab0e1ecd16..4dee790f1049 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -43,7 +43,6 @@ vreg_s4a_1p8: smps4 {
regulator-always-on;
regulator-boot-on;
- regulator-allow-set-load;
vin-supply = <&vreg_3p3>;
};
@@ -137,6 +136,9 @@ vreg_l5a_0p88: ldo5 {
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a_1p8: ldo7 {
@@ -152,6 +154,9 @@ vreg_l10a_2p96: ldo10 {
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11a_0p8: ldo11 {
@@ -258,6 +263,9 @@ vreg_l5c_1p2: ldo5 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_1p8: ldo7 {
@@ -273,6 +281,9 @@ vreg_l8c_1p2: ldo8 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
--
2.35.3