From 91e5167b81cd7fde29a584f22d33815d6e3debf3 Mon Sep 17 00:00:00 2001
From: Geetha sowjanya <gakula@marvell.com>
Date: Fri, 21 Jan 2022 12:04:45 +0530
Subject: [PATCH 25/34] octeontx2-af: cn10k: Do not enable RPM loopback for LPC
 interfaces
Git-commit: df66b6ebc5dcf7253e35a640b9ec4add54195c25
References: git-fixes
Patch-mainline: v5.17-rc2

Internal looback is not supported to low rate LPCS interface like
SGMII/QSGMII. Hence don't allow to enable for such interfaces.

Fixes: 3ad3f8f93c81 ("octeontx2-af: cn10k: MAC internal loopback support")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Denis Kirjanov <denis.kirjanov@suse.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/rpm.c |   25 ++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

--- a/drivers/net/ethernet/marvell/octeontx2/af/rpm.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rpm.c
@@ -252,23 +252,20 @@ int rpm_lmac_internal_loopback(void *rpm
 	if (!rpm || lmac_id >= rpm->lmac_count)
 		return -ENODEV;
 	lmac_type = rpm->mac_ops->get_lmac_type(rpm, lmac_id);
-	if (lmac_type == LMAC_MODE_100G_R) {
-		cfg = rpm_read(rpm, lmac_id, RPMX_MTI_PCS100X_CONTROL1);
 
-		if (enable)
-			cfg |= RPMX_MTI_PCS_LBK;
-		else
-			cfg &= ~RPMX_MTI_PCS_LBK;
-		rpm_write(rpm, lmac_id, RPMX_MTI_PCS100X_CONTROL1, cfg);
-	} else {
-		cfg = rpm_read(rpm, lmac_id, RPMX_MTI_LPCSX_CONTROL1);
-		if (enable)
-			cfg |= RPMX_MTI_PCS_LBK;
-		else
-			cfg &= ~RPMX_MTI_PCS_LBK;
-		rpm_write(rpm, lmac_id, RPMX_MTI_LPCSX_CONTROL1, cfg);
+	if (lmac_type == LMAC_MODE_QSGMII || lmac_type == LMAC_MODE_SGMII) {
+		dev_err(&rpm->pdev->dev, "loopback not supported for LPC mode\n");
+		return 0;
 	}
 
+	cfg = rpm_read(rpm, lmac_id, RPMX_MTI_PCS100X_CONTROL1);
+
+	if (enable)
+		cfg |= RPMX_MTI_PCS_LBK;
+	else
+		cfg &= ~RPMX_MTI_PCS_LBK;
+	rpm_write(rpm, lmac_id, RPMX_MTI_PCS100X_CONTROL1, cfg);
+
 	return 0;
 }