From: James Smart <jsmart2021@gmail.com>
Date: Thu, 5 May 2022 20:55:16 -0700
Subject: scsi: lpfc: Rework FDMI initialization after link up
Patch-mainline: v5.19-rc1
Git-commit: de3ec318fee32313092b609f88475f86e58f3fe5
References: bsc#1200045
After a link up, it's possible for the switch to change FDMI support (e.g.
FDMI1 vs FDMI2 vs SmartSAN). If the switch reverts to FDMI1, then the
revert is currently not detected.
Additionally, when NPIV is configured, it's possible the physical port's
RHBA is unprocessed by the switch before reciept of an NPIV port issued
RPRT. This causes some switches vendors to reject the NPIV's RPRT.
Fix by reinitializing base FDMI mode on link up, and defer FDMI vport RPRT
submission until after confirming physical port's RHBA is completed.
Link: https://lore.kernel.org/r/20220506035519.50908-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Daniel Wagner <dwagner@suse.de>
---
drivers/scsi/lpfc/lpfc.h | 2
drivers/scsi/lpfc/lpfc_crtn.h | 1
drivers/scsi/lpfc/lpfc_ct.c | 98 ++++++++++++++++++++++++++++++++++++---
drivers/scsi/lpfc/lpfc_hbadisc.c | 5 +
drivers/scsi/lpfc/lpfc_init.c | 43 ++++++++++++-----
5 files changed, 129 insertions(+), 20 deletions(-)
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -611,6 +611,7 @@ struct lpfc_vport {
#define FC_CT_RSNN_NN 0x4 /* RSNN_NN accepted by switch */
#define FC_CT_RSPN_ID 0x8 /* RSPN_ID accepted by switch */
#define FC_CT_RFT_ID 0x10 /* RFT_ID accepted by switch */
+#define FC_CT_RPRT_DEFER 0x20 /* Defer issuing FDMI RPRT */
struct list_head fc_nodes;
@@ -1058,6 +1059,7 @@ struct lpfc_hba {
#define HBA_HBEAT_INP 0x4000000 /* mbox HBEAT is in progress */
#define HBA_HBEAT_TMO 0x8000000 /* HBEAT initiated after timeout */
#define HBA_FLOGI_OUTSTANDING 0x10000000 /* FLOGI is outstanding */
+#define HBA_RHBA_CMPL 0x20000000 /* RHBA FDMI command is successful */
struct completion *fw_dump_cmpl; /* cmpl event tracker for fw_dump */
uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -434,6 +434,7 @@ void lpfc_nvmet_buf_free(struct lpfc_hba
void lpfc_in_buf_free(struct lpfc_hba *, struct lpfc_dmabuf *);
void lpfc_rq_buf_free(struct lpfc_hba *phba, struct lpfc_dmabuf *mp);
+void lpfc_setup_fdmi_mask(struct lpfc_vport *vport);
int lpfc_link_reset(struct lpfc_vport *vport);
/* Function prototypes. */
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -2168,6 +2168,41 @@ lpfc_ns_cmd(struct lpfc_vport *vport, in
}
/**
+ * lpfc_fdmi_rprt_defer - Check for any deferred FDMI RPRT commands
+ * @phba: Pointer to HBA context object.
+ * @mask: Initial port attributes mask
+ *
+ * This function checks to see if any vports have deferred their FDMI RPRT.
+ * A vports RPRT may be deferred if it is issued before the primary ports
+ * RHBA completes.
+ */
+static void
+lpfc_fdmi_rprt_defer(struct lpfc_hba *phba, uint32_t mask)
+{
+ struct lpfc_vport **vports;
+ struct lpfc_vport *vport;
+ struct lpfc_nodelist *ndlp;
+ int i;
+
+ phba->hba_flag |= HBA_RHBA_CMPL;
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+ vport = vports[i];
+ ndlp = lpfc_findnode_did(phba->pport, FDMI_DID);
+ if (!ndlp)
+ continue;
+ if (vport->ct_flags & FC_CT_RPRT_DEFER) {
+ vport->ct_flags &= ~FC_CT_RPRT_DEFER;
+ vport->fdmi_port_mask = mask;
+ lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPRT, 0);
+ }
+ }
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+}
+
+/**
* lpfc_cmpl_ct_disc_fdmi - Handle a discovery FDMI completion
* @phba: Pointer to HBA context object.
* @cmdiocb: Pointer to the command IOCBQ.
@@ -2255,8 +2290,12 @@ lpfc_cmpl_ct_disc_fdmi(struct lpfc_hba *
switch (cmd) {
case SLI_MGMT_RHBA:
if (vport->fdmi_hba_mask == LPFC_FDMI2_HBA_ATTR) {
- /* Fallback to FDMI-1 */
+ /* Fallback to FDMI-1 for HBA attributes */
vport->fdmi_hba_mask = LPFC_FDMI1_HBA_ATTR;
+
+ /* If HBA attributes are FDMI1, so should
+ * port attributes be for consistency.
+ */
vport->fdmi_port_mask = LPFC_FDMI1_PORT_ATTR;
/* Start over */
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA, 0);
@@ -2264,6 +2303,11 @@ lpfc_cmpl_ct_disc_fdmi(struct lpfc_hba *
return;
case SLI_MGMT_RPRT:
+ if (vport->port_type != LPFC_PHYSICAL_PORT) {
+ ndlp = lpfc_findnode_did(phba->pport, FDMI_DID);
+ if (!ndlp)
+ return;
+ }
if (vport->fdmi_port_mask == LPFC_FDMI2_PORT_ATTR) {
/* Fallback to FDMI-1 */
vport->fdmi_port_mask = LPFC_FDMI1_PORT_ATTR;
@@ -2313,6 +2357,9 @@ lpfc_cmpl_ct_disc_fdmi(struct lpfc_hba *
*/
switch (cmd) {
case SLI_MGMT_RHBA:
+ /* Check for any RPRTs deferred till after RHBA completes */
+ lpfc_fdmi_rprt_defer(phba, vport->fdmi_port_mask);
+
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPA, 0);
break;
@@ -2321,10 +2368,26 @@ lpfc_cmpl_ct_disc_fdmi(struct lpfc_hba *
break;
case SLI_MGMT_DPRT:
- if (vport->port_type == LPFC_PHYSICAL_PORT)
+ if (vport->port_type == LPFC_PHYSICAL_PORT) {
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RHBA, 0);
- else
- lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPRT, 0);
+ } else {
+ ndlp = lpfc_findnode_did(phba->pport, FDMI_DID);
+ if (!ndlp)
+ return;
+
+ /* Only issue a RPRT for the vport if the RHBA
+ * for the physical port completes successfully.
+ * We may have to defer the RPRT accordingly.
+ */
+ if (phba->hba_flag & HBA_RHBA_CMPL) {
+ lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPRT, 0);
+ } else {
+ lpfc_printf_vlog(vport, KERN_INFO,
+ LOG_DISCOVERY,
+ "6078 RPRT deferred\n");
+ vport->ct_flags |= FC_CT_RPRT_DEFER;
+ }
+ }
break;
case SLI_MGMT_RPA:
if (vport->port_type == LPFC_PHYSICAL_PORT &&
@@ -2339,7 +2402,8 @@ lpfc_cmpl_ct_disc_fdmi(struct lpfc_hba *
break;
}
- lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
+ lpfc_printf_log(phba, KERN_INFO,
+ LOG_DISCOVERY | LOG_CGN_MGMT,
"6210 Issue Vendor MI FDMI %x\n",
phba->sli4_hba.pc_sli4_params.mi_ver);
@@ -2408,6 +2472,9 @@ lpfc_fdmi_change_check(struct lpfc_vport
phba->link_flag &= ~LS_CT_VEN_RPA;
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA, 0);
} else {
+ ndlp = lpfc_findnode_did(phba->pport, FDMI_DID);
+ if (!ndlp)
+ return;
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DPRT, 0);
}
@@ -2429,6 +2496,9 @@ lpfc_fdmi_change_check(struct lpfc_vport
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPA,
LPFC_FDMI_PORT_ATTR_num_disc);
} else {
+ ndlp = lpfc_findnode_did(phba->pport, FDMI_DID);
+ if (!ndlp)
+ return;
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPRT,
LPFC_FDMI_PORT_ATTR_num_disc);
}
@@ -3501,8 +3571,10 @@ lpfc_fdmi_cmd(struct lpfc_vport *vport,
/* FDMI request */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
- "0218 FDMI Request Data: x%x x%x x%x\n",
- vport->fc_flag, vport->port_state, cmdcode);
+ "0218 FDMI Request x%x mask x%x Data: x%x x%x x%x\n",
+ cmdcode, new_mask, vport->fdmi_port_mask,
+ vport->fc_flag, vport->port_state);
+
CtReq = (struct lpfc_sli_ct_request *)mp->virt;
/* First populate the CT_IU preamble */
@@ -3571,6 +3643,12 @@ lpfc_fdmi_cmd(struct lpfc_vport *vport,
break;
case SLI_MGMT_RPRT:
+ if (vport->port_type != LPFC_PHYSICAL_PORT) {
+ ndlp = lpfc_findnode_did(phba->pport, FDMI_DID);
+ if (!ndlp)
+ return 0;
+ }
+ fallthrough;
case SLI_MGMT_RPA:
pab = (struct lpfc_fdmi_reg_portattr *)&CtReq->un.PortID;
if (cmdcode == SLI_MGMT_RPRT) {
@@ -3635,6 +3713,12 @@ lpfc_fdmi_cmd(struct lpfc_vport *vport,
rsp_size = FC_MAX_NS_RSP;
fallthrough;
case SLI_MGMT_DPRT:
+ if (vport->port_type != LPFC_PHYSICAL_PORT) {
+ ndlp = lpfc_findnode_did(phba->pport, FDMI_DID);
+ if (!ndlp)
+ return 0;
+ }
+ fallthrough;
case SLI_MGMT_DPA:
pe = (struct lpfc_fdmi_port_entry *)&CtReq->un.PortID;
memcpy((uint8_t *)&pe->PortName,
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1359,6 +1359,7 @@ lpfc_linkup_port(struct lpfc_vport *vpor
vport->fc_flag |= FC_NDISC_ACTIVE;
vport->fc_ns_retry = 0;
spin_unlock_irq(shost->host_lock);
+ lpfc_setup_fdmi_mask(vport);
lpfc_linkup_cleanup_nodes(vport);
}
@@ -1390,8 +1391,8 @@ lpfc_linkup(struct lpfc_hba *phba)
phba->pport->rcv_flogi_cnt = 0;
spin_unlock_irq(shost->host_lock);
- /* reinitialize initial FLOGI flag */
- phba->hba_flag &= ~(HBA_FLOGI_ISSUED);
+ /* reinitialize initial HBA flag */
+ phba->hba_flag &= ~(HBA_FLOGI_ISSUED | HBA_RHBA_CMPL);
phba->defer_flogi_acc_flag = false;
return 0;
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -9002,6 +9002,36 @@ lpfc_hba_free(struct lpfc_hba *phba)
}
/**
+ * lpfc_setup_fdmi_mask - Setup initial FDMI mask for HBA and Port attributes
+ * @vport: pointer to lpfc vport data structure.
+ *
+ * This routine is will setup initial FDMI attribute masks for
+ * FDMI2 or SmartSAN depending on module parameters. The driver will attempt
+ * to get these attributes first before falling back, the attribute
+ * fallback hierarchy is SmartSAN -> FDMI2 -> FMDI1
+ **/
+void
+lpfc_setup_fdmi_mask(struct lpfc_vport *vport)
+{
+ struct lpfc_hba *phba = vport->phba;
+
+ vport->load_flag |= FC_ALLOW_FDMI;
+ if (phba->cfg_enable_SmartSAN ||
+ phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT) {
+ /* Setup appropriate attribute masks */
+ vport->fdmi_hba_mask = LPFC_FDMI2_HBA_ATTR;
+ if (phba->cfg_enable_SmartSAN)
+ vport->fdmi_port_mask = LPFC_FDMI2_SMART_ATTR;
+ else
+ vport->fdmi_port_mask = LPFC_FDMI2_PORT_ATTR;
+ }
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY,
+ "6077 Setup FDMI mask: hba x%x port x%x\n",
+ vport->fdmi_hba_mask, vport->fdmi_port_mask);
+}
+
+/**
* lpfc_create_shost - Create hba physical port with associated scsi host.
* @phba: pointer to lpfc hba data structure.
*
@@ -9044,21 +9074,12 @@ lpfc_create_shost(struct lpfc_hba *phba)
/* Put reference to SCSI host to driver's device private data */
pci_set_drvdata(phba->pcidev, shost);
+ lpfc_setup_fdmi_mask(vport);
+
/*
* At this point we are fully registered with PSA. In addition,
* any initial discovery should be completed.
*/
- vport->load_flag |= FC_ALLOW_FDMI;
- if (phba->cfg_enable_SmartSAN ||
- (phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT)) {
-
- /* Setup appropriate attribute masks */
- vport->fdmi_hba_mask = LPFC_FDMI2_HBA_ATTR;
- if (phba->cfg_enable_SmartSAN)
- vport->fdmi_port_mask = LPFC_FDMI2_SMART_ATTR;
- else
- vport->fdmi_port_mask = LPFC_FDMI2_PORT_ATTR;
- }
return 0;
}