From 1deeda8d2877c18bc2b9eeee10dd6d2628852848 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com>
Date: Thu, 19 May 2022 11:18:07 +0300
Subject: [PATCH] serial: stm32-usart: Correct CSIZE, bits, and parity
Mime-version: 1.0
Content-type: text/plain; charset=UTF-8
Content-transfer-encoding: 8bit
Git-commit: 1deeda8d2877c18bc2b9eeee10dd6d2628852848
Patch-mainline: v5.19-rc1
References: git-fixes

Add CSIZE sanitization for unsupported CSIZE configurations. In
addition, if parity is asked for but CSx was unsupported, the sensible
result is CS8+parity which requires setting USART_CR1_M0 like with 9
bits.

Incorrect CSIZE results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: c8a9d043947b (serial: stm32: fix word length configuration)
Cc: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Takashi Iwai <tiwai@suse.de>

---
 drivers/tty/serial/stm32-usart.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 764415b8e8f0..b7b44f4050d4 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1088,13 +1088,22 @@ static void stm32_usart_set_termios(struct uart_port *port,
 	 * CS8 or (CS7 + parity), 8 bits word aka [M1:M0] = 0b00
 	 * M0 and M1 already cleared by cr1 initialization.
 	 */
-	if (bits == 9)
+	if (bits == 9) {
 		cr1 |= USART_CR1_M0;
-	else if ((bits == 7) && cfg->has_7bits_data)
+	} else if ((bits == 7) && cfg->has_7bits_data) {
 		cr1 |= USART_CR1_M1;
-	else if (bits != 8)
+	} else if (bits != 8) {
 		dev_dbg(port->dev, "Unsupported data bits config: %u bits\n"
 			, bits);
+		cflag &= ~CSIZE;
+		cflag |= CS8;
+		termios->c_cflag = cflag;
+		bits = 8;
+		if (cflag & PARENB) {
+			bits++;
+			cr1 |= USART_CR1_M0;
+		}
+	}
 
 	if (ofs->rtor != UNDEF_REG && (stm32_port->rx_ch ||
 				       (stm32_port->fifoen &&
-- 
2.35.3