From: =?UTF-8?q?Michal=20Vok=C3=A1=C4=8D?= <michal.vokac@ysoft.com>
Date: Tue, 13 Apr 2021 16:45:57 +0200
Subject: ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Git-commit: 0e4a4a08cd78efcaddbc2e4c5ed86b5a5cb8a15e
Patch-mainline: v5.13-rc5
References: git-fixes
The FEC does not have a PHY so it should not have a phy-handle. It is
connected to the switch at RGMII level so we need a fixed-link sub-node
on both ends.
This was not a problem until the qca8k.c driver was converted to PHYLINK
by commit b3591c2a3661 ("net: dsa: qca8k: Switch to PHYLINK instead of
PHYLIB"). That commit revealed the FEC configuration was not correct.
Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Ivan T. Ivanov <iivanov@suse.de>
---
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -99,9 +99,13 @@
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
phy-reset-duration = <20>;
phy-supply = <&sw2_reg>;
- phy-handle = <ðphy0>;
status = "okay";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
mdio {
#address-cells = <1>;
#size-cells = <0>;