From: Sasha Neftin <sasha.neftin@intel.com>
Date: Tue, 19 Nov 2019 13:45:40 +0200
Subject: igc: Remove no need declaration of the igc_sw_init
Patch-mainline: v5.6-rc1
Git-commit: 63c92c9d2e536c91ace17dec7534883f40421753
References: bsc#1160634
We want to avoid forward-declarations of function if possible.
Rearrange the igc_sw_init function implementation.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/ethernet/intel/igc/igc_main.c | 1483 ++++++++++++++----------------
1 file changed, 740 insertions(+), 743 deletions(-)
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -51,9 +51,6 @@ static const struct pci_device_id igc_pc
MODULE_DEVICE_TABLE(pci, igc_pci_tbl);
-/* forward declaration */
-static int igc_sw_init(struct igc_adapter *);
-
enum latency_range {
lowest_latency = 0,
low_latency = 1,
@@ -2354,6 +2351,746 @@ static void igc_irq_disable(struct igc_a
}
}
+void igc_set_flag_queue_pairs(struct igc_adapter *adapter,
+ const u32 max_rss_queues)
+{
+ /* Determine if we need to pair queues. */
+ /* If rss_queues > half of max_rss_queues, pair the queues in
+ * order to conserve interrupts due to limited supply.
+ */
+ if (adapter->rss_queues > (max_rss_queues / 2))
+ adapter->flags |= IGC_FLAG_QUEUE_PAIRS;
+ else
+ adapter->flags &= ~IGC_FLAG_QUEUE_PAIRS;
+}
+
+unsigned int igc_get_max_rss_queues(struct igc_adapter *adapter)
+{
+ unsigned int max_rss_queues;
+
+ /* Determine the maximum number of RSS queues supported. */
+ max_rss_queues = IGC_MAX_RX_QUEUES;
+
+ return max_rss_queues;
+}
+
+static void igc_init_queue_configuration(struct igc_adapter *adapter)
+{
+ u32 max_rss_queues;
+
+ max_rss_queues = igc_get_max_rss_queues(adapter);
+ adapter->rss_queues = min_t(u32, max_rss_queues, num_online_cpus());
+
+ igc_set_flag_queue_pairs(adapter, max_rss_queues);
+}
+
+/**
+ * igc_reset_q_vector - Reset config for interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_idx: Index of vector to be reset
+ *
+ * If NAPI is enabled it will delete any references to the
+ * NAPI struct. This is preparation for igc_free_q_vector.
+ */
+static void igc_reset_q_vector(struct igc_adapter *adapter, int v_idx)
+{
+ struct igc_q_vector *q_vector = adapter->q_vector[v_idx];
+
+ /* if we're coming from igc_set_interrupt_capability, the vectors are
+ * not yet allocated
+ */
+ if (!q_vector)
+ return;
+
+ if (q_vector->tx.ring)
+ adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL;
+
+ if (q_vector->rx.ring)
+ adapter->rx_ring[q_vector->rx.ring->queue_index] = NULL;
+
+ netif_napi_del(&q_vector->napi);
+}
+
+/**
+ * igc_free_q_vector - Free memory allocated for specific interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_idx: Index of vector to be freed
+ *
+ * This function frees the memory allocated to the q_vector.
+ */
+static void igc_free_q_vector(struct igc_adapter *adapter, int v_idx)
+{
+ struct igc_q_vector *q_vector = adapter->q_vector[v_idx];
+
+ adapter->q_vector[v_idx] = NULL;
+
+ /* igc_get_stats64() might access the rings on this vector,
+ * we must wait a grace period before freeing it.
+ */
+ if (q_vector)
+ kfree_rcu(q_vector, rcu);
+}
+
+/**
+ * igc_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors. In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ */
+static void igc_free_q_vectors(struct igc_adapter *adapter)
+{
+ int v_idx = adapter->num_q_vectors;
+
+ adapter->num_tx_queues = 0;
+ adapter->num_rx_queues = 0;
+ adapter->num_q_vectors = 0;
+
+ while (v_idx--) {
+ igc_reset_q_vector(adapter, v_idx);
+ igc_free_q_vector(adapter, v_idx);
+ }
+}
+
+/**
+ * igc_update_itr - update the dynamic ITR value based on statistics
+ * @q_vector: pointer to q_vector
+ * @ring_container: ring info to update the itr for
+ *
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ * NOTE: These calculations are only valid when operating in a single-
+ * queue environment.
+ */
+static void igc_update_itr(struct igc_q_vector *q_vector,
+ struct igc_ring_container *ring_container)
+{
+ unsigned int packets = ring_container->total_packets;
+ unsigned int bytes = ring_container->total_bytes;
+ u8 itrval = ring_container->itr;
+
+ /* no packets, exit with status unchanged */
+ if (packets == 0)
+ return;
+
+ switch (itrval) {
+ case lowest_latency:
+ /* handle TSO and jumbo frames */
+ if (bytes / packets > 8000)
+ itrval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ itrval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* this if handles the TSO accounting */
+ if (bytes / packets > 8000)
+ itrval = bulk_latency;
+ else if ((packets < 10) || ((bytes / packets) > 1200))
+ itrval = bulk_latency;
+ else if ((packets > 35))
+ itrval = lowest_latency;
+ } else if (bytes / packets > 2000) {
+ itrval = bulk_latency;
+ } else if (packets <= 2 && bytes < 512) {
+ itrval = lowest_latency;
+ }
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ itrval = low_latency;
+ } else if (bytes < 1500) {
+ itrval = low_latency;
+ }
+ break;
+ }
+
+ /* clear work counters since we have the values we need */
+ ring_container->total_bytes = 0;
+ ring_container->total_packets = 0;
+
+ /* write updated itr to ring container */
+ ring_container->itr = itrval;
+}
+
+static void igc_set_itr(struct igc_q_vector *q_vector)
+{
+ struct igc_adapter *adapter = q_vector->adapter;
+ u32 new_itr = q_vector->itr_val;
+ u8 current_itr = 0;
+
+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ case SPEED_100:
+ current_itr = 0;
+ new_itr = IGC_4K_ITR;
+ goto set_itr_now;
+ default:
+ break;
+ }
+
+ igc_update_itr(q_vector, &q_vector->tx);
+ igc_update_itr(q_vector, &q_vector->rx);
+
+ current_itr = max(q_vector->rx.itr, q_vector->tx.itr);
+
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (current_itr == lowest_latency &&
+ ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
+ (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
+ current_itr = low_latency;
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = IGC_70K_ITR; /* 70,000 ints/sec */
+ break;
+ case low_latency:
+ new_itr = IGC_20K_ITR; /* 20,000 ints/sec */
+ break;
+ case bulk_latency:
+ new_itr = IGC_4K_ITR; /* 4,000 ints/sec */
+ break;
+ default:
+ break;
+ }
+
+set_itr_now:
+ if (new_itr != q_vector->itr_val) {
+ /* this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing
+ */
+ new_itr = new_itr > q_vector->itr_val ?
+ max((new_itr * q_vector->itr_val) /
+ (new_itr + (q_vector->itr_val >> 2)),
+ new_itr) : new_itr;
+ /* Don't write the value here; it resets the adapter's
+ * internal timer, and causes us to delay far longer than
+ * we should between interrupts. Instead, we write the ITR
+ * value at the beginning of the next interrupt so the timing
+ * ends up being correct.
+ */
+ q_vector->itr_val = new_itr;
+ q_vector->set_itr = 1;
+ }
+}
+
+static void igc_reset_interrupt_capability(struct igc_adapter *adapter)
+{
+ int v_idx = adapter->num_q_vectors;
+
+ if (adapter->msix_entries) {
+ pci_disable_msix(adapter->pdev);
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ } else if (adapter->flags & IGC_FLAG_HAS_MSI) {
+ pci_disable_msi(adapter->pdev);
+ }
+
+ while (v_idx--)
+ igc_reset_q_vector(adapter, v_idx);
+}
+
+/**
+ * igc_set_interrupt_capability - set MSI or MSI-X if supported
+ * @adapter: Pointer to adapter structure
+ * @msix: boolean value for MSI-X capability
+ *
+ * Attempt to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ */
+static void igc_set_interrupt_capability(struct igc_adapter *adapter,
+ bool msix)
+{
+ int numvecs, i;
+ int err;
+
+ if (!msix)
+ goto msi_only;
+ adapter->flags |= IGC_FLAG_HAS_MSIX;
+
+ /* Number of supported queues. */
+ adapter->num_rx_queues = adapter->rss_queues;
+
+ adapter->num_tx_queues = adapter->rss_queues;
+
+ /* start with one vector for every Rx queue */
+ numvecs = adapter->num_rx_queues;
+
+ /* if Tx handler is separate add 1 for every Tx queue */
+ if (!(adapter->flags & IGC_FLAG_QUEUE_PAIRS))
+ numvecs += adapter->num_tx_queues;
+
+ /* store the number of vectors reserved for queues */
+ adapter->num_q_vectors = numvecs;
+
+ /* add 1 vector for link status interrupts */
+ numvecs++;
+
+ adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry),
+ GFP_KERNEL);
+
+ if (!adapter->msix_entries)
+ return;
+
+ /* populate entry values */
+ for (i = 0; i < numvecs; i++)
+ adapter->msix_entries[i].entry = i;
+
+ err = pci_enable_msix_range(adapter->pdev,
+ adapter->msix_entries,
+ numvecs,
+ numvecs);
+ if (err > 0)
+ return;
+
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+
+ igc_reset_interrupt_capability(adapter);
+
+msi_only:
+ adapter->flags &= ~IGC_FLAG_HAS_MSIX;
+
+ adapter->rss_queues = 1;
+ adapter->flags |= IGC_FLAG_QUEUE_PAIRS;
+ adapter->num_rx_queues = 1;
+ adapter->num_tx_queues = 1;
+ adapter->num_q_vectors = 1;
+ if (!pci_enable_msi(adapter->pdev))
+ adapter->flags |= IGC_FLAG_HAS_MSI;
+}
+
+/**
+ * igc_update_ring_itr - update the dynamic ITR value based on packet size
+ * @q_vector: pointer to q_vector
+ *
+ * Stores a new ITR value based on strictly on packet size. This
+ * algorithm is less sophisticated than that used in igc_update_itr,
+ * due to the difficulty of synchronizing statistics across multiple
+ * receive rings. The divisors and thresholds used by this function
+ * were determined based on theoretical maximum wire speed and testing
+ * data, in order to minimize response time while increasing bulk
+ * throughput.
+ * NOTE: This function is called only when operating in a multiqueue
+ * receive environment.
+ */
+static void igc_update_ring_itr(struct igc_q_vector *q_vector)
+{
+ struct igc_adapter *adapter = q_vector->adapter;
+ int new_val = q_vector->itr_val;
+ int avg_wire_size = 0;
+ unsigned int packets;
+
+ /* For non-gigabit speeds, just fix the interrupt rate at 4000
+ * ints/sec - ITR timer value of 120 ticks.
+ */
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ case SPEED_100:
+ new_val = IGC_4K_ITR;
+ goto set_itr_val;
+ default:
+ break;
+ }
+
+ packets = q_vector->rx.total_packets;
+ if (packets)
+ avg_wire_size = q_vector->rx.total_bytes / packets;
+
+ packets = q_vector->tx.total_packets;
+ if (packets)
+ avg_wire_size = max_t(u32, avg_wire_size,
+ q_vector->tx.total_bytes / packets);
+
+ /* if avg_wire_size isn't set no work was done */
+ if (!avg_wire_size)
+ goto clear_counts;
+
+ /* Add 24 bytes to size to account for CRC, preamble, and gap */
+ avg_wire_size += 24;
+
+ /* Don't starve jumbo frames */
+ avg_wire_size = min(avg_wire_size, 3000);
+
+ /* Give a little boost to mid-size frames */
+ if (avg_wire_size > 300 && avg_wire_size < 1200)
+ new_val = avg_wire_size / 3;
+ else
+ new_val = avg_wire_size / 2;
+
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (new_val < IGC_20K_ITR &&
+ ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
+ (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
+ new_val = IGC_20K_ITR;
+
+set_itr_val:
+ if (new_val != q_vector->itr_val) {
+ q_vector->itr_val = new_val;
+ q_vector->set_itr = 1;
+ }
+clear_counts:
+ q_vector->rx.total_bytes = 0;
+ q_vector->rx.total_packets = 0;
+ q_vector->tx.total_bytes = 0;
+ q_vector->tx.total_packets = 0;
+}
+
+static void igc_ring_irq_enable(struct igc_q_vector *q_vector)
+{
+ struct igc_adapter *adapter = q_vector->adapter;
+ struct igc_hw *hw = &adapter->hw;
+
+ if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) ||
+ (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) {
+ if (adapter->num_q_vectors == 1)
+ igc_set_itr(q_vector);
+ else
+ igc_update_ring_itr(q_vector);
+ }
+
+ if (!test_bit(__IGC_DOWN, &adapter->state)) {
+ if (adapter->msix_entries)
+ wr32(IGC_EIMS, q_vector->eims_value);
+ else
+ igc_irq_enable(adapter);
+ }
+}
+
+static void igc_add_ring(struct igc_ring *ring,
+ struct igc_ring_container *head)
+{
+ head->ring = ring;
+ head->count++;
+}
+
+/**
+ * igc_cache_ring_register - Descriptor ring to register mapping
+ * @adapter: board private structure to initialize
+ *
+ * Once we know the feature-set enabled for the device, we'll cache
+ * the register offset the descriptor ring is assigned to.
+ */
+static void igc_cache_ring_register(struct igc_adapter *adapter)
+{
+ int i = 0, j = 0;
+
+ switch (adapter->hw.mac.type) {
+ case igc_i225:
+ /* Fall through */
+ default:
+ for (; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i]->reg_idx = i;
+ for (; j < adapter->num_tx_queues; j++)
+ adapter->tx_ring[j]->reg_idx = j;
+ break;
+ }
+}
+
+/**
+ * igc_poll - NAPI Rx polling callback
+ * @napi: napi polling structure
+ * @budget: count of how many packets we should handle
+ */
+static int igc_poll(struct napi_struct *napi, int budget)
+{
+ struct igc_q_vector *q_vector = container_of(napi,
+ struct igc_q_vector,
+ napi);
+ bool clean_complete = true;
+ int work_done = 0;
+
+ if (q_vector->tx.ring)
+ clean_complete = igc_clean_tx_irq(q_vector, budget);
+
+ if (q_vector->rx.ring) {
+ int cleaned = igc_clean_rx_irq(q_vector, budget);
+
+ work_done += cleaned;
+ if (cleaned >= budget)
+ clean_complete = false;
+ }
+
+ /* If all work not completed, return budget and keep polling */
+ if (!clean_complete)
+ return budget;
+
+ /* Exit the polling mode, but don't re-enable interrupts if stack might
+ * poll us due to busy-polling
+ */
+ if (likely(napi_complete_done(napi, work_done)))
+ igc_ring_irq_enable(q_vector);
+
+ return min(work_done, budget - 1);
+}
+
+/**
+ * igc_alloc_q_vector - Allocate memory for a single interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_count: q_vectors allocated on adapter, used for ring interleaving
+ * @v_idx: index of vector in adapter struct
+ * @txr_count: total number of Tx rings to allocate
+ * @txr_idx: index of first Tx ring to allocate
+ * @rxr_count: total number of Rx rings to allocate
+ * @rxr_idx: index of first Rx ring to allocate
+ *
+ * We allocate one q_vector. If allocation fails we return -ENOMEM.
+ */
+static int igc_alloc_q_vector(struct igc_adapter *adapter,
+ unsigned int v_count, unsigned int v_idx,
+ unsigned int txr_count, unsigned int txr_idx,
+ unsigned int rxr_count, unsigned int rxr_idx)
+{
+ struct igc_q_vector *q_vector;
+ struct igc_ring *ring;
+ int ring_count;
+
+ /* igc only supports 1 Tx and/or 1 Rx queue per vector */
+ if (txr_count > 1 || rxr_count > 1)
+ return -ENOMEM;
+
+ ring_count = txr_count + rxr_count;
+
+ /* allocate q_vector and rings */
+ q_vector = adapter->q_vector[v_idx];
+ if (!q_vector)
+ q_vector = kzalloc(struct_size(q_vector, ring, ring_count),
+ GFP_KERNEL);
+ else
+ memset(q_vector, 0, struct_size(q_vector, ring, ring_count));
+ if (!q_vector)
+ return -ENOMEM;
+
+ /* initialize NAPI */
+ netif_napi_add(adapter->netdev, &q_vector->napi,
+ igc_poll, 64);
+
+ /* tie q_vector and adapter together */
+ adapter->q_vector[v_idx] = q_vector;
+ q_vector->adapter = adapter;
+
+ /* initialize work limits */
+ q_vector->tx.work_limit = adapter->tx_work_limit;
+
+ /* initialize ITR configuration */
+ q_vector->itr_register = adapter->io_addr + IGC_EITR(0);
+ q_vector->itr_val = IGC_START_ITR;
+
+ /* initialize pointer to rings */
+ ring = q_vector->ring;
+
+ /* initialize ITR */
+ if (rxr_count) {
+ /* rx or rx/tx vector */
+ if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3)
+ q_vector->itr_val = adapter->rx_itr_setting;
+ } else {
+ /* tx only vector */
+ if (!adapter->tx_itr_setting || adapter->tx_itr_setting > 3)
+ q_vector->itr_val = adapter->tx_itr_setting;
+ }
+
+ if (txr_count) {
+ /* assign generic ring traits */
+ ring->dev = &adapter->pdev->dev;
+ ring->netdev = adapter->netdev;
+
+ /* configure backlink on ring */
+ ring->q_vector = q_vector;
+
+ /* update q_vector Tx values */
+ igc_add_ring(ring, &q_vector->tx);
+
+ /* apply Tx specific ring traits */
+ ring->count = adapter->tx_ring_count;
+ ring->queue_index = txr_idx;
+
+ /* assign ring to adapter */
+ adapter->tx_ring[txr_idx] = ring;
+
+ /* push pointer to next ring */
+ ring++;
+ }
+
+ if (rxr_count) {
+ /* assign generic ring traits */
+ ring->dev = &adapter->pdev->dev;
+ ring->netdev = adapter->netdev;
+
+ /* configure backlink on ring */
+ ring->q_vector = q_vector;
+
+ /* update q_vector Rx values */
+ igc_add_ring(ring, &q_vector->rx);
+
+ /* apply Rx specific ring traits */
+ ring->count = adapter->rx_ring_count;
+ ring->queue_index = rxr_idx;
+
+ /* assign ring to adapter */
+ adapter->rx_ring[rxr_idx] = ring;
+ }
+
+ return 0;
+}
+
+/**
+ * igc_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt. If allocation fails we
+ * return -ENOMEM.
+ */
+static int igc_alloc_q_vectors(struct igc_adapter *adapter)
+{
+ int rxr_remaining = adapter->num_rx_queues;
+ int txr_remaining = adapter->num_tx_queues;
+ int rxr_idx = 0, txr_idx = 0, v_idx = 0;
+ int q_vectors = adapter->num_q_vectors;
+ int err;
+
+ if (q_vectors >= (rxr_remaining + txr_remaining)) {
+ for (; rxr_remaining; v_idx++) {
+ err = igc_alloc_q_vector(adapter, q_vectors, v_idx,
+ 0, 0, 1, rxr_idx);
+
+ if (err)
+ goto err_out;
+
+ /* update counts and index */
+ rxr_remaining--;
+ rxr_idx++;
+ }
+ }
+
+ for (; v_idx < q_vectors; v_idx++) {
+ int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx);
+ int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx);
+
+ err = igc_alloc_q_vector(adapter, q_vectors, v_idx,
+ tqpv, txr_idx, rqpv, rxr_idx);
+
+ if (err)
+ goto err_out;
+
+ /* update counts and index */
+ rxr_remaining -= rqpv;
+ txr_remaining -= tqpv;
+ rxr_idx++;
+ txr_idx++;
+ }
+
+ return 0;
+
+err_out:
+ adapter->num_tx_queues = 0;
+ adapter->num_rx_queues = 0;
+ adapter->num_q_vectors = 0;
+
+ while (v_idx--)
+ igc_free_q_vector(adapter, v_idx);
+
+ return -ENOMEM;
+}
+
+/**
+ * igc_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
+ * @adapter: Pointer to adapter structure
+ * @msix: boolean for MSI-X capability
+ *
+ * This function initializes the interrupts and allocates all of the queues.
+ */
+static int igc_init_interrupt_scheme(struct igc_adapter *adapter, bool msix)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int err = 0;
+
+ igc_set_interrupt_capability(adapter, msix);
+
+ err = igc_alloc_q_vectors(adapter);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to allocate memory for vectors\n");
+ goto err_alloc_q_vectors;
+ }
+
+ igc_cache_ring_register(adapter);
+
+ return 0;
+
+err_alloc_q_vectors:
+ igc_reset_interrupt_capability(adapter);
+ return err;
+}
+
+/**
+ * igc_sw_init - Initialize general software structures (struct igc_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * igc_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ */
+static int igc_sw_init(struct igc_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct igc_hw *hw = &adapter->hw;
+
+ int size = sizeof(struct igc_mac_addr) * hw->mac.rar_entry_count;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
+
+ /* set default ring sizes */
+ adapter->tx_ring_count = IGC_DEFAULT_TXD;
+ adapter->rx_ring_count = IGC_DEFAULT_RXD;
+
+ /* set default ITR values */
+ adapter->rx_itr_setting = IGC_DEFAULT_ITR;
+ adapter->tx_itr_setting = IGC_DEFAULT_ITR;
+
+ /* set default work limits */
+ adapter->tx_work_limit = IGC_DEFAULT_TX_WORK;
+
+ /* adjust max frame to be at least the size of a standard frame */
+ adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN +
+ VLAN_HLEN;
+ adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+
+ spin_lock_init(&adapter->nfc_lock);
+ spin_lock_init(&adapter->stats64_lock);
+ /* Assume MSI-X interrupts, will be checked during IRQ allocation */
+ adapter->flags |= IGC_FLAG_HAS_MSIX;
+
+ adapter->mac_table = kzalloc(size, GFP_ATOMIC);
+ if (!adapter->mac_table)
+ return -ENOMEM;
+
+ igc_init_queue_configuration(adapter);
+
+ /* This call may decrease the number of queues */
+ if (igc_init_interrupt_scheme(adapter, true)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ igc_irq_disable(adapter);
+
+ set_bit(__IGC_DOWN, &adapter->state);
+
+ return 0;
+}
+
/**
* igc_up - Open the interface and prepare it to handle traffic
* @adapter: board private structure
@@ -3018,161 +3755,6 @@ err_out:
}
/**
- * igc_reset_q_vector - Reset config for interrupt vector
- * @adapter: board private structure to initialize
- * @v_idx: Index of vector to be reset
- *
- * If NAPI is enabled it will delete any references to the
- * NAPI struct. This is preparation for igc_free_q_vector.
- */
-static void igc_reset_q_vector(struct igc_adapter *adapter, int v_idx)
-{
- struct igc_q_vector *q_vector = adapter->q_vector[v_idx];
-
- /* if we're coming from igc_set_interrupt_capability, the vectors are
- * not yet allocated
- */
- if (!q_vector)
- return;
-
- if (q_vector->tx.ring)
- adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL;
-
- if (q_vector->rx.ring)
- adapter->rx_ring[q_vector->rx.ring->queue_index] = NULL;
-
- netif_napi_del(&q_vector->napi);
-}
-
-static void igc_reset_interrupt_capability(struct igc_adapter *adapter)
-{
- int v_idx = adapter->num_q_vectors;
-
- if (adapter->msix_entries) {
- pci_disable_msix(adapter->pdev);
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
- } else if (adapter->flags & IGC_FLAG_HAS_MSI) {
- pci_disable_msi(adapter->pdev);
- }
-
- while (v_idx--)
- igc_reset_q_vector(adapter, v_idx);
-}
-
-/**
- * igc_set_interrupt_capability - set MSI or MSI-X if supported
- * @adapter: Pointer to adapter structure
- * @msix: boolean value for MSI-X capability
- *
- * Attempt to configure interrupts using the best available
- * capabilities of the hardware and kernel.
- */
-static void igc_set_interrupt_capability(struct igc_adapter *adapter,
- bool msix)
-{
- int numvecs, i;
- int err;
-
- if (!msix)
- goto msi_only;
- adapter->flags |= IGC_FLAG_HAS_MSIX;
-
- /* Number of supported queues. */
- adapter->num_rx_queues = adapter->rss_queues;
-
- adapter->num_tx_queues = adapter->rss_queues;
-
- /* start with one vector for every Rx queue */
- numvecs = adapter->num_rx_queues;
-
- /* if Tx handler is separate add 1 for every Tx queue */
- if (!(adapter->flags & IGC_FLAG_QUEUE_PAIRS))
- numvecs += adapter->num_tx_queues;
-
- /* store the number of vectors reserved for queues */
- adapter->num_q_vectors = numvecs;
-
- /* add 1 vector for link status interrupts */
- numvecs++;
-
- adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry),
- GFP_KERNEL);
-
- if (!adapter->msix_entries)
- return;
-
- /* populate entry values */
- for (i = 0; i < numvecs; i++)
- adapter->msix_entries[i].entry = i;
-
- err = pci_enable_msix_range(adapter->pdev,
- adapter->msix_entries,
- numvecs,
- numvecs);
- if (err > 0)
- return;
-
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
-
- igc_reset_interrupt_capability(adapter);
-
-msi_only:
- adapter->flags &= ~IGC_FLAG_HAS_MSIX;
-
- adapter->rss_queues = 1;
- adapter->flags |= IGC_FLAG_QUEUE_PAIRS;
- adapter->num_rx_queues = 1;
- adapter->num_tx_queues = 1;
- adapter->num_q_vectors = 1;
- if (!pci_enable_msi(adapter->pdev))
- adapter->flags |= IGC_FLAG_HAS_MSI;
-}
-
-/**
- * igc_free_q_vector - Free memory allocated for specific interrupt vector
- * @adapter: board private structure to initialize
- * @v_idx: Index of vector to be freed
- *
- * This function frees the memory allocated to the q_vector.
- */
-static void igc_free_q_vector(struct igc_adapter *adapter, int v_idx)
-{
- struct igc_q_vector *q_vector = adapter->q_vector[v_idx];
-
- adapter->q_vector[v_idx] = NULL;
-
- /* igc_get_stats64() might access the rings on this vector,
- * we must wait a grace period before freeing it.
- */
- if (q_vector)
- kfree_rcu(q_vector, rcu);
-}
-
-/**
- * igc_free_q_vectors - Free memory allocated for interrupt vectors
- * @adapter: board private structure to initialize
- *
- * This function frees the memory allocated to the q_vectors. In addition if
- * NAPI is enabled it will delete any references to the NAPI struct prior
- * to freeing the q_vector.
- */
-static void igc_free_q_vectors(struct igc_adapter *adapter)
-{
- int v_idx = adapter->num_q_vectors;
-
- adapter->num_tx_queues = 0;
- adapter->num_rx_queues = 0;
- adapter->num_q_vectors = 0;
-
- while (v_idx--) {
- igc_reset_q_vector(adapter, v_idx);
- igc_free_q_vector(adapter, v_idx);
- }
-}
-
-/**
* igc_clear_interrupt_scheme - reset the device to a state of no interrupts
* @adapter: Pointer to adapter structure
*
@@ -3421,149 +4003,6 @@ no_wait:
}
/**
- * igc_update_ring_itr - update the dynamic ITR value based on packet size
- * @q_vector: pointer to q_vector
- *
- * Stores a new ITR value based on strictly on packet size. This
- * algorithm is less sophisticated than that used in igc_update_itr,
- * due to the difficulty of synchronizing statistics across multiple
- * receive rings. The divisors and thresholds used by this function
- * were determined based on theoretical maximum wire speed and testing
- * data, in order to minimize response time while increasing bulk
- * throughput.
- * NOTE: This function is called only when operating in a multiqueue
- * receive environment.
- */
-static void igc_update_ring_itr(struct igc_q_vector *q_vector)
-{
- struct igc_adapter *adapter = q_vector->adapter;
- int new_val = q_vector->itr_val;
- int avg_wire_size = 0;
- unsigned int packets;
-
- /* For non-gigabit speeds, just fix the interrupt rate at 4000
- * ints/sec - ITR timer value of 120 ticks.
- */
- switch (adapter->link_speed) {
- case SPEED_10:
- case SPEED_100:
- new_val = IGC_4K_ITR;
- goto set_itr_val;
- default:
- break;
- }
-
- packets = q_vector->rx.total_packets;
- if (packets)
- avg_wire_size = q_vector->rx.total_bytes / packets;
-
- packets = q_vector->tx.total_packets;
- if (packets)
- avg_wire_size = max_t(u32, avg_wire_size,
- q_vector->tx.total_bytes / packets);
-
- /* if avg_wire_size isn't set no work was done */
- if (!avg_wire_size)
- goto clear_counts;
-
- /* Add 24 bytes to size to account for CRC, preamble, and gap */
- avg_wire_size += 24;
-
- /* Don't starve jumbo frames */
- avg_wire_size = min(avg_wire_size, 3000);
-
- /* Give a little boost to mid-size frames */
- if (avg_wire_size > 300 && avg_wire_size < 1200)
- new_val = avg_wire_size / 3;
- else
- new_val = avg_wire_size / 2;
-
- /* conservative mode (itr 3) eliminates the lowest_latency setting */
- if (new_val < IGC_20K_ITR &&
- ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
- (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
- new_val = IGC_20K_ITR;
-
-set_itr_val:
- if (new_val != q_vector->itr_val) {
- q_vector->itr_val = new_val;
- q_vector->set_itr = 1;
- }
-clear_counts:
- q_vector->rx.total_bytes = 0;
- q_vector->rx.total_packets = 0;
- q_vector->tx.total_bytes = 0;
- q_vector->tx.total_packets = 0;
-}
-
-/**
- * igc_update_itr - update the dynamic ITR value based on statistics
- * @q_vector: pointer to q_vector
- * @ring_container: ring info to update the itr for
- *
- * Stores a new ITR value based on packets and byte
- * counts during the last interrupt. The advantage of per interrupt
- * computation is faster updates and more accurate ITR for the current
- * traffic pattern. Constants in this function were computed
- * based on theoretical maximum wire speed and thresholds were set based
- * on testing data as well as attempting to minimize response time
- * while increasing bulk throughput.
- * NOTE: These calculations are only valid when operating in a single-
- * queue environment.
- */
-static void igc_update_itr(struct igc_q_vector *q_vector,
- struct igc_ring_container *ring_container)
-{
- unsigned int packets = ring_container->total_packets;
- unsigned int bytes = ring_container->total_bytes;
- u8 itrval = ring_container->itr;
-
- /* no packets, exit with status unchanged */
- if (packets == 0)
- return;
-
- switch (itrval) {
- case lowest_latency:
- /* handle TSO and jumbo frames */
- if (bytes / packets > 8000)
- itrval = bulk_latency;
- else if ((packets < 5) && (bytes > 512))
- itrval = low_latency;
- break;
- case low_latency: /* 50 usec aka 20000 ints/s */
- if (bytes > 10000) {
- /* this if handles the TSO accounting */
- if (bytes / packets > 8000)
- itrval = bulk_latency;
- else if ((packets < 10) || ((bytes / packets) > 1200))
- itrval = bulk_latency;
- else if ((packets > 35))
- itrval = lowest_latency;
- } else if (bytes / packets > 2000) {
- itrval = bulk_latency;
- } else if (packets <= 2 && bytes < 512) {
- itrval = lowest_latency;
- }
- break;
- case bulk_latency: /* 250 usec aka 4000 ints/s */
- if (bytes > 25000) {
- if (packets > 35)
- itrval = low_latency;
- } else if (bytes < 1500) {
- itrval = low_latency;
- }
- break;
- }
-
- /* clear work counters since we have the values we need */
- ring_container->total_bytes = 0;
- ring_container->total_packets = 0;
-
- /* write updated itr to ring container */
- ring_container->itr = itrval;
-}
-
-/**
* igc_intr_msi - Interrupt Handler
* @irq: interrupt number
* @data: pointer to a network interface device structure
@@ -3640,356 +4079,6 @@ static irqreturn_t igc_intr(int irq, voi
return IRQ_HANDLED;
}
-static void igc_set_itr(struct igc_q_vector *q_vector)
-{
- struct igc_adapter *adapter = q_vector->adapter;
- u32 new_itr = q_vector->itr_val;
- u8 current_itr = 0;
-
- /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
- switch (adapter->link_speed) {
- case SPEED_10:
- case SPEED_100:
- current_itr = 0;
- new_itr = IGC_4K_ITR;
- goto set_itr_now;
- default:
- break;
- }
-
- igc_update_itr(q_vector, &q_vector->tx);
- igc_update_itr(q_vector, &q_vector->rx);
-
- current_itr = max(q_vector->rx.itr, q_vector->tx.itr);
-
- /* conservative mode (itr 3) eliminates the lowest_latency setting */
- if (current_itr == lowest_latency &&
- ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
- (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
- current_itr = low_latency;
-
- switch (current_itr) {
- /* counts and packets in update_itr are dependent on these numbers */
- case lowest_latency:
- new_itr = IGC_70K_ITR; /* 70,000 ints/sec */
- break;
- case low_latency:
- new_itr = IGC_20K_ITR; /* 20,000 ints/sec */
- break;
- case bulk_latency:
- new_itr = IGC_4K_ITR; /* 4,000 ints/sec */
- break;
- default:
- break;
- }
-
-set_itr_now:
- if (new_itr != q_vector->itr_val) {
- /* this attempts to bias the interrupt rate towards Bulk
- * by adding intermediate steps when interrupt rate is
- * increasing
- */
- new_itr = new_itr > q_vector->itr_val ?
- max((new_itr * q_vector->itr_val) /
- (new_itr + (q_vector->itr_val >> 2)),
- new_itr) : new_itr;
- /* Don't write the value here; it resets the adapter's
- * internal timer, and causes us to delay far longer than
- * we should between interrupts. Instead, we write the ITR
- * value at the beginning of the next interrupt so the timing
- * ends up being correct.
- */
- q_vector->itr_val = new_itr;
- q_vector->set_itr = 1;
- }
-}
-
-static void igc_ring_irq_enable(struct igc_q_vector *q_vector)
-{
- struct igc_adapter *adapter = q_vector->adapter;
- struct igc_hw *hw = &adapter->hw;
-
- if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) ||
- (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) {
- if (adapter->num_q_vectors == 1)
- igc_set_itr(q_vector);
- else
- igc_update_ring_itr(q_vector);
- }
-
- if (!test_bit(__IGC_DOWN, &adapter->state)) {
- if (adapter->msix_entries)
- wr32(IGC_EIMS, q_vector->eims_value);
- else
- igc_irq_enable(adapter);
- }
-}
-
-/**
- * igc_poll - NAPI Rx polling callback
- * @napi: napi polling structure
- * @budget: count of how many packets we should handle
- */
-static int igc_poll(struct napi_struct *napi, int budget)
-{
- struct igc_q_vector *q_vector = container_of(napi,
- struct igc_q_vector,
- napi);
- bool clean_complete = true;
- int work_done = 0;
-
- if (q_vector->tx.ring)
- clean_complete = igc_clean_tx_irq(q_vector, budget);
-
- if (q_vector->rx.ring) {
- int cleaned = igc_clean_rx_irq(q_vector, budget);
-
- work_done += cleaned;
- if (cleaned >= budget)
- clean_complete = false;
- }
-
- /* If all work not completed, return budget and keep polling */
- if (!clean_complete)
- return budget;
-
- /* Exit the polling mode, but don't re-enable interrupts if stack might
- * poll us due to busy-polling
- */
- if (likely(napi_complete_done(napi, work_done)))
- igc_ring_irq_enable(q_vector);
-
- return min(work_done, budget - 1);
-}
-
-static void igc_add_ring(struct igc_ring *ring,
- struct igc_ring_container *head)
-{
- head->ring = ring;
- head->count++;
-}
-
-/**
- * igc_alloc_q_vector - Allocate memory for a single interrupt vector
- * @adapter: board private structure to initialize
- * @v_count: q_vectors allocated on adapter, used for ring interleaving
- * @v_idx: index of vector in adapter struct
- * @txr_count: total number of Tx rings to allocate
- * @txr_idx: index of first Tx ring to allocate
- * @rxr_count: total number of Rx rings to allocate
- * @rxr_idx: index of first Rx ring to allocate
- *
- * We allocate one q_vector. If allocation fails we return -ENOMEM.
- */
-static int igc_alloc_q_vector(struct igc_adapter *adapter,
- unsigned int v_count, unsigned int v_idx,
- unsigned int txr_count, unsigned int txr_idx,
- unsigned int rxr_count, unsigned int rxr_idx)
-{
- struct igc_q_vector *q_vector;
- struct igc_ring *ring;
- int ring_count;
-
- /* igc only supports 1 Tx and/or 1 Rx queue per vector */
- if (txr_count > 1 || rxr_count > 1)
- return -ENOMEM;
-
- ring_count = txr_count + rxr_count;
-
- /* allocate q_vector and rings */
- q_vector = adapter->q_vector[v_idx];
- if (!q_vector)
- q_vector = kzalloc(struct_size(q_vector, ring, ring_count),
- GFP_KERNEL);
- else
- memset(q_vector, 0, struct_size(q_vector, ring, ring_count));
- if (!q_vector)
- return -ENOMEM;
-
- /* initialize NAPI */
- netif_napi_add(adapter->netdev, &q_vector->napi,
- igc_poll, 64);
-
- /* tie q_vector and adapter together */
- adapter->q_vector[v_idx] = q_vector;
- q_vector->adapter = adapter;
-
- /* initialize work limits */
- q_vector->tx.work_limit = adapter->tx_work_limit;
-
- /* initialize ITR configuration */
- q_vector->itr_register = adapter->io_addr + IGC_EITR(0);
- q_vector->itr_val = IGC_START_ITR;
-
- /* initialize pointer to rings */
- ring = q_vector->ring;
-
- /* initialize ITR */
- if (rxr_count) {
- /* rx or rx/tx vector */
- if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3)
- q_vector->itr_val = adapter->rx_itr_setting;
- } else {
- /* tx only vector */
- if (!adapter->tx_itr_setting || adapter->tx_itr_setting > 3)
- q_vector->itr_val = adapter->tx_itr_setting;
- }
-
- if (txr_count) {
- /* assign generic ring traits */
- ring->dev = &adapter->pdev->dev;
- ring->netdev = adapter->netdev;
-
- /* configure backlink on ring */
- ring->q_vector = q_vector;
-
- /* update q_vector Tx values */
- igc_add_ring(ring, &q_vector->tx);
-
- /* apply Tx specific ring traits */
- ring->count = adapter->tx_ring_count;
- ring->queue_index = txr_idx;
-
- /* assign ring to adapter */
- adapter->tx_ring[txr_idx] = ring;
-
- /* push pointer to next ring */
- ring++;
- }
-
- if (rxr_count) {
- /* assign generic ring traits */
- ring->dev = &adapter->pdev->dev;
- ring->netdev = adapter->netdev;
-
- /* configure backlink on ring */
- ring->q_vector = q_vector;
-
- /* update q_vector Rx values */
- igc_add_ring(ring, &q_vector->rx);
-
- /* apply Rx specific ring traits */
- ring->count = adapter->rx_ring_count;
- ring->queue_index = rxr_idx;
-
- /* assign ring to adapter */
- adapter->rx_ring[rxr_idx] = ring;
- }
-
- return 0;
-}
-
-/**
- * igc_alloc_q_vectors - Allocate memory for interrupt vectors
- * @adapter: board private structure to initialize
- *
- * We allocate one q_vector per queue interrupt. If allocation fails we
- * return -ENOMEM.
- */
-static int igc_alloc_q_vectors(struct igc_adapter *adapter)
-{
- int rxr_remaining = adapter->num_rx_queues;
- int txr_remaining = adapter->num_tx_queues;
- int rxr_idx = 0, txr_idx = 0, v_idx = 0;
- int q_vectors = adapter->num_q_vectors;
- int err;
-
- if (q_vectors >= (rxr_remaining + txr_remaining)) {
- for (; rxr_remaining; v_idx++) {
- err = igc_alloc_q_vector(adapter, q_vectors, v_idx,
- 0, 0, 1, rxr_idx);
-
- if (err)
- goto err_out;
-
- /* update counts and index */
- rxr_remaining--;
- rxr_idx++;
- }
- }
-
- for (; v_idx < q_vectors; v_idx++) {
- int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx);
- int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx);
-
- err = igc_alloc_q_vector(adapter, q_vectors, v_idx,
- tqpv, txr_idx, rqpv, rxr_idx);
-
- if (err)
- goto err_out;
-
- /* update counts and index */
- rxr_remaining -= rqpv;
- txr_remaining -= tqpv;
- rxr_idx++;
- txr_idx++;
- }
-
- return 0;
-
-err_out:
- adapter->num_tx_queues = 0;
- adapter->num_rx_queues = 0;
- adapter->num_q_vectors = 0;
-
- while (v_idx--)
- igc_free_q_vector(adapter, v_idx);
-
- return -ENOMEM;
-}
-
-/**
- * igc_cache_ring_register - Descriptor ring to register mapping
- * @adapter: board private structure to initialize
- *
- * Once we know the feature-set enabled for the device, we'll cache
- * the register offset the descriptor ring is assigned to.
- */
-static void igc_cache_ring_register(struct igc_adapter *adapter)
-{
- int i = 0, j = 0;
-
- switch (adapter->hw.mac.type) {
- case igc_i225:
- /* Fall through */
- default:
- for (; i < adapter->num_rx_queues; i++)
- adapter->rx_ring[i]->reg_idx = i;
- for (; j < adapter->num_tx_queues; j++)
- adapter->tx_ring[j]->reg_idx = j;
- break;
- }
-}
-
-/**
- * igc_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
- * @adapter: Pointer to adapter structure
- * @msix: boolean for MSI-X capability
- *
- * This function initializes the interrupts and allocates all of the queues.
- */
-static int igc_init_interrupt_scheme(struct igc_adapter *adapter, bool msix)
-{
- struct pci_dev *pdev = adapter->pdev;
- int err = 0;
-
- igc_set_interrupt_capability(adapter, msix);
-
- err = igc_alloc_q_vectors(adapter);
- if (err) {
- dev_err(&pdev->dev, "Unable to allocate memory for vectors\n");
- goto err_alloc_q_vectors;
- }
-
- igc_cache_ring_register(adapter);
-
- return 0;
-
-err_alloc_q_vectors:
- igc_reset_interrupt_capability(adapter);
- return err;
-}
-
static void igc_free_irq(struct igc_adapter *adapter)
{
if (adapter->msix_entries) {
@@ -4776,98 +4865,6 @@ static struct pci_driver igc_driver = {
.shutdown = igc_shutdown,
};
-void igc_set_flag_queue_pairs(struct igc_adapter *adapter,
- const u32 max_rss_queues)
-{
- /* Determine if we need to pair queues. */
- /* If rss_queues > half of max_rss_queues, pair the queues in
- * order to conserve interrupts due to limited supply.
- */
- if (adapter->rss_queues > (max_rss_queues / 2))
- adapter->flags |= IGC_FLAG_QUEUE_PAIRS;
- else
- adapter->flags &= ~IGC_FLAG_QUEUE_PAIRS;
-}
-
-unsigned int igc_get_max_rss_queues(struct igc_adapter *adapter)
-{
- unsigned int max_rss_queues;
-
- /* Determine the maximum number of RSS queues supported. */
- max_rss_queues = IGC_MAX_RX_QUEUES;
-
- return max_rss_queues;
-}
-
-static void igc_init_queue_configuration(struct igc_adapter *adapter)
-{
- u32 max_rss_queues;
-
- max_rss_queues = igc_get_max_rss_queues(adapter);
- adapter->rss_queues = min_t(u32, max_rss_queues, num_online_cpus());
-
- igc_set_flag_queue_pairs(adapter, max_rss_queues);
-}
-
-/**
- * igc_sw_init - Initialize general software structures (struct igc_adapter)
- * @adapter: board private structure to initialize
- *
- * igc_sw_init initializes the Adapter private data structure.
- * Fields are initialized based on PCI device information and
- * OS network device settings (MTU size).
- */
-static int igc_sw_init(struct igc_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct igc_hw *hw = &adapter->hw;
-
- int size = sizeof(struct igc_mac_addr) * hw->mac.rar_entry_count;
-
- pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
-
- /* set default ring sizes */
- adapter->tx_ring_count = IGC_DEFAULT_TXD;
- adapter->rx_ring_count = IGC_DEFAULT_RXD;
-
- /* set default ITR values */
- adapter->rx_itr_setting = IGC_DEFAULT_ITR;
- adapter->tx_itr_setting = IGC_DEFAULT_ITR;
-
- /* set default work limits */
- adapter->tx_work_limit = IGC_DEFAULT_TX_WORK;
-
- /* adjust max frame to be at least the size of a standard frame */
- adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN +
- VLAN_HLEN;
- adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
-
- spin_lock_init(&adapter->nfc_lock);
- spin_lock_init(&adapter->stats64_lock);
- /* Assume MSI-X interrupts, will be checked during IRQ allocation */
- adapter->flags |= IGC_FLAG_HAS_MSIX;
-
- adapter->mac_table = kzalloc(size, GFP_ATOMIC);
- if (!adapter->mac_table)
- return -ENOMEM;
-
- igc_init_queue_configuration(adapter);
-
- /* This call may decrease the number of queues */
- if (igc_init_interrupt_scheme(adapter, true)) {
- dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
- return -ENOMEM;
- }
-
- /* Explicitly disable IRQ since the NIC can be in any state. */
- igc_irq_disable(adapter);
-
- set_bit(__IGC_DOWN, &adapter->state);
-
- return 0;
-}
-
/**
* igc_reinit_queues - return error
* @adapter: pointer to adapter structure