From: Helmut Grohne <helmut.grohne@intenta.de>
Date: Tue, 21 Jul 2020 13:07:39 +0200
Subject: net: dsa: microchip: call phy_remove_link_mode during probe
Git-commit: 3506b2f42dff66ea6814c3dfa1988bafb79e6f88
Patch-mainline: 5.8-rc7
References: networking-stable-20_07_29
When doing "ip link set dev ... up" for a ksz9477 backed link,
ksz9477_phy_setup is called and it calls phy_remove_link_mode to remove
1000baseT HDX. During phy_remove_link_mode, phy_advertise_supported is
called. Doing so reverts any previous change to advertised link modes
e.g. using a udevd .link file.
phy_remove_link_mode is not meant to be used while opening a link and
should be called during phy probe when the link is not yet available to
userspace.
Therefore move the phy_remove_link_mode calls into
ksz9477_switch_register. It indirectly calls dsa_register_switch, which
creates the relevant struct phy_devices and we update the link modes
right after that. At that time dev->features is already initialized by
ksz9477_switch_detect.
Remove phy_setup from ksz_dev_ops as no users remain.
Link: https://lore.kernel.org/netdev/20200715192722.GD1256692@lunn.ch/
Fixes: 42fc6a4c613019 ("net: dsa: microchip: prepare PHY for proper advertisement")
Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/net/dsa/microchip/ksz9477.c | 42 ++++++++++++++++++---------------
drivers/net/dsa/microchip/ksz_common.c | 1
drivers/net/dsa/microchip/ksz_priv.h | 2 -
3 files changed, 23 insertions(+), 22 deletions(-)
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -974,23 +974,6 @@ static void ksz9477_port_mirror_del(stru
PORT_MIRROR_SNIFFER, false);
}
-static void ksz9477_phy_setup(struct ksz_device *dev, int port,
- struct phy_device *phy)
-{
- /* Only apply to port with PHY. */
- if (port >= dev->phy_port_cnt)
- return;
-
- /* The MAC actually cannot run in 1000 half-duplex mode. */
- phy_remove_link_mode(phy,
- ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
-
- /* PHY does not support gigabit. */
- if (!(dev->features & GBIT_SUPPORT))
- phy_remove_link_mode(phy,
- ETHTOOL_LINK_MODE_1000baseT_Full_BIT);
-}
-
static bool ksz9477_get_gbit(struct ksz_device *dev, u8 data)
{
bool gbit;
@@ -1594,7 +1577,6 @@ static const struct ksz_dev_ops ksz9477_
.get_port_addr = ksz9477_get_port_addr,
.cfg_port_member = ksz9477_cfg_port_member,
.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
- .phy_setup = ksz9477_phy_setup,
.port_setup = ksz9477_port_setup,
.r_mib_cnt = ksz9477_r_mib_cnt,
.r_mib_pkt = ksz9477_r_mib_pkt,
@@ -1608,7 +1590,29 @@ static const struct ksz_dev_ops ksz9477_
int ksz9477_switch_register(struct ksz_device *dev)
{
- return ksz_switch_register(dev, &ksz9477_dev_ops);
+ int ret, i;
+ struct phy_device *phydev;
+
+ ret = ksz_switch_register(dev, &ksz9477_dev_ops);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < dev->phy_port_cnt; ++i) {
+ if (!dsa_is_user_port(dev->ds, i))
+ continue;
+
+ phydev = dsa_to_port(dev->ds, i)->slave->phydev;
+
+ /* The MAC actually cannot run in 1000 half-duplex mode. */
+ phy_remove_link_mode(phydev,
+ ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+
+ /* PHY does not support gigabit. */
+ if (!(dev->features & GBIT_SUPPORT))
+ phy_remove_link_mode(phydev,
+ ETHTOOL_LINK_MODE_1000baseT_Full_BIT);
+ }
+ return ret;
}
EXPORT_SYMBOL(ksz9477_switch_register);
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -373,7 +373,6 @@ int ksz_enable_port(struct dsa_switch *d
/* setup slave port */
dev->dev_ops->port_setup(dev, port, false);
- dev->dev_ops->phy_setup(dev, port, phy);
/* port_stp_state_set() will be called after to enable the port so
* there is no need to do anything.
--- a/drivers/net/dsa/microchip/ksz_priv.h
+++ b/drivers/net/dsa/microchip/ksz_priv.h
@@ -120,8 +120,6 @@ struct ksz_dev_ops {
u32 (*get_port_addr)(int port, int offset);
void (*cfg_port_member)(struct ksz_device *dev, int port, u8 member);
void (*flush_dyn_mac_table)(struct ksz_device *dev, int port);
- void (*phy_setup)(struct ksz_device *dev, int port,
- struct phy_device *phy);
void (*port_cleanup)(struct ksz_device *dev, int port);
void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port);
void (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);