From: Jan Sokolowski <jan.sokolowski@intel.com>
Date: Fri, 9 Jun 2017 15:59:33 -0700
Subject: IB/hfi1: Set proper logging levels on QSFP cable error events
Patch-mainline: v4.14-rc1
Git-commit: 702265fc0002497fd0ddaae4a5bec00a8a40da3e
References: bsc#1060463 FATE#323043
Change QSFP cable error events logging levels from info to error.
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/infiniband/hw/hfi1/chip.c | 64 +++++++++++++++++++-------------------
1 file changed, 32 insertions(+), 32 deletions(-)
--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -9376,13 +9376,13 @@ static int handle_qsfp_error_conditions(
if ((qsfp_interrupt_status[0] & QSFP_HIGH_TEMP_ALARM) ||
(qsfp_interrupt_status[0] & QSFP_HIGH_TEMP_WARNING))
- dd_dev_info(dd, "%s: QSFP cable temperature too high\n",
- __func__);
+ dd_dev_err(dd, "%s: QSFP cable temperature too high\n",
+ __func__);
if ((qsfp_interrupt_status[0] & QSFP_LOW_TEMP_ALARM) ||
(qsfp_interrupt_status[0] & QSFP_LOW_TEMP_WARNING))
- dd_dev_info(dd, "%s: QSFP cable temperature too low\n",
- __func__);
+ dd_dev_err(dd, "%s: QSFP cable temperature too low\n",
+ __func__);
/*
* The remaining alarms/warnings don't matter if the link is down.
@@ -9392,75 +9392,75 @@ static int handle_qsfp_error_conditions(
if ((qsfp_interrupt_status[1] & QSFP_HIGH_VCC_ALARM) ||
(qsfp_interrupt_status[1] & QSFP_HIGH_VCC_WARNING))
- dd_dev_info(dd, "%s: QSFP supply voltage too high\n",
- __func__);
+ dd_dev_err(dd, "%s: QSFP supply voltage too high\n",
+ __func__);
if ((qsfp_interrupt_status[1] & QSFP_LOW_VCC_ALARM) ||
(qsfp_interrupt_status[1] & QSFP_LOW_VCC_WARNING))
- dd_dev_info(dd, "%s: QSFP supply voltage too low\n",
- __func__);
+ dd_dev_err(dd, "%s: QSFP supply voltage too low\n",
+ __func__);
/* Byte 2 is vendor specific */
if ((qsfp_interrupt_status[3] & QSFP_HIGH_POWER_ALARM) ||
(qsfp_interrupt_status[3] & QSFP_HIGH_POWER_WARNING))
- dd_dev_info(dd, "%s: Cable RX channel 1/2 power too high\n",
- __func__);
+ dd_dev_err(dd, "%s: Cable RX channel 1/2 power too high\n",
+ __func__);
if ((qsfp_interrupt_status[3] & QSFP_LOW_POWER_ALARM) ||
(qsfp_interrupt_status[3] & QSFP_LOW_POWER_WARNING))
- dd_dev_info(dd, "%s: Cable RX channel 1/2 power too low\n",
- __func__);
+ dd_dev_err(dd, "%s: Cable RX channel 1/2 power too low\n",
+ __func__);
if ((qsfp_interrupt_status[4] & QSFP_HIGH_POWER_ALARM) ||
(qsfp_interrupt_status[4] & QSFP_HIGH_POWER_WARNING))
- dd_dev_info(dd, "%s: Cable RX channel 3/4 power too high\n",
- __func__);
+ dd_dev_err(dd, "%s: Cable RX channel 3/4 power too high\n",
+ __func__);
if ((qsfp_interrupt_status[4] & QSFP_LOW_POWER_ALARM) ||
(qsfp_interrupt_status[4] & QSFP_LOW_POWER_WARNING))
- dd_dev_info(dd, "%s: Cable RX channel 3/4 power too low\n",
- __func__);
+ dd_dev_err(dd, "%s: Cable RX channel 3/4 power too low\n",
+ __func__);
if ((qsfp_interrupt_status[5] & QSFP_HIGH_BIAS_ALARM) ||
(qsfp_interrupt_status[5] & QSFP_HIGH_BIAS_WARNING))
- dd_dev_info(dd, "%s: Cable TX channel 1/2 bias too high\n",
- __func__);
+ dd_dev_err(dd, "%s: Cable TX channel 1/2 bias too high\n",
+ __func__);
if ((qsfp_interrupt_status[5] & QSFP_LOW_BIAS_ALARM) ||
(qsfp_interrupt_status[5] & QSFP_LOW_BIAS_WARNING))
- dd_dev_info(dd, "%s: Cable TX channel 1/2 bias too low\n",
- __func__);
+ dd_dev_err(dd, "%s: Cable TX channel 1/2 bias too low\n",
+ __func__);
if ((qsfp_interrupt_status[6] & QSFP_HIGH_BIAS_ALARM) ||
(qsfp_interrupt_status[6] & QSFP_HIGH_BIAS_WARNING))
- dd_dev_info(dd, "%s: Cable TX channel 3/4 bias too high\n",
- __func__);
+ dd_dev_err(dd, "%s: Cable TX channel 3/4 bias too high\n",
+ __func__);
if ((qsfp_interrupt_status[6] & QSFP_LOW_BIAS_ALARM) ||
(qsfp_interrupt_status[6] & QSFP_LOW_BIAS_WARNING))
- dd_dev_info(dd, "%s: Cable TX channel 3/4 bias too low\n",
- __func__);
+ dd_dev_err(dd, "%s: Cable TX channel 3/4 bias too low\n",
+ __func__);
if ((qsfp_interrupt_status[7] & QSFP_HIGH_POWER_ALARM) ||
(qsfp_interrupt_status[7] & QSFP_HIGH_POWER_WARNING))
- dd_dev_info(dd, "%s: Cable TX channel 1/2 power too high\n",
- __func__);
+ dd_dev_err(dd, "%s: Cable TX channel 1/2 power too high\n",
+ __func__);
if ((qsfp_interrupt_status[7] & QSFP_LOW_POWER_ALARM) ||
(qsfp_interrupt_status[7] & QSFP_LOW_POWER_WARNING))
- dd_dev_info(dd, "%s: Cable TX channel 1/2 power too low\n",
- __func__);
+ dd_dev_err(dd, "%s: Cable TX channel 1/2 power too low\n",
+ __func__);
if ((qsfp_interrupt_status[8] & QSFP_HIGH_POWER_ALARM) ||
(qsfp_interrupt_status[8] & QSFP_HIGH_POWER_WARNING))
- dd_dev_info(dd, "%s: Cable TX channel 3/4 power too high\n",
- __func__);
+ dd_dev_err(dd, "%s: Cable TX channel 3/4 power too high\n",
+ __func__);
if ((qsfp_interrupt_status[8] & QSFP_LOW_POWER_ALARM) ||
(qsfp_interrupt_status[8] & QSFP_LOW_POWER_WARNING))
- dd_dev_info(dd, "%s: Cable TX channel 3/4 power too low\n",
- __func__);
+ dd_dev_err(dd, "%s: Cable TX channel 3/4 power too low\n",
+ __func__);
/* Bytes 9-10 and 11-12 are reserved */
/* Bytes 13-15 are vendor specific */