From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 18 Nov 2019 16:35:56 +0100
Subject: ACPI: button: Add DMI quirk for Acer Switch 10 SW5-032 lid-switch
Patch-mainline: v5.5-rc1
Git-commit: 90ed9c639c1b53556f87b1c5031c7e4c57285a92
References: jsc#SLE-16407

The Acer Switch 10 SW5-032 _LID method is quite broken, it looks like this:

            Method (_LID, 0, NotSerialized)  // _LID: Lid Status
            {
                If ((STAS & One))
                {
                    Local0 = One
                    PBCG |= 0x05000000
                    HMCG |= 0x05000000
                }
                Else
                {
                    Local0 = Zero
                    PBCG &= 0xF0FFFFFF
                    HMCG &= 0xF0FFFFFF
                }

                ^^PCI0.GFX0.CLID = Local0
                Return (Local0)
            }

The problem here is the accesses to the PBCG and HMCG, these are the
pinconf0 registers for the power, resp. the home button GPIO,
e.g. PBCG is declared as:

            OperationRegion (PWBT, SystemMemory, 0xFED0E080, 0x10)
            Field (PWBT, DWordAcc, NoLock, Preserve)
            {
                PBCG,   32,
                PBV1,   32,
                PBSA,   32,
                PBV2,   32
            }

Where 0xFED0E000 is the base address of the GPO2 device and 0x80 is
the offset for the pin used for the powerbutton.

The problem here is this line in _LID:
                    PBCG |= 0x05000000

This changes the trigger flags of the GPIO, changing when it generates
interrupts. Note it does not clear the original flags. Linux uses an
edge triggered interrupt on both positive and negative edges. This |=
adds the BYT_TRIG_LVL flag to this, so now it is turned into a level
interrupt which fires both when low and high, iow it simply always
fires leading to an interrupt storm, the tablet immediately waking up
from suspend again, etc.

There is nothing we can do to fix this, except for a DSDT override,
which the user needs to do manually. The only thing we can do is
never call _LID, which requires disabling the lid-switch functionality
altogether.

This commit adds a quirk for this, as no lid-switch function is better
then the interrupt storm. A user manually applying a DSDT override can
also override the quirk on the kernel cmdline.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Lee, Chun-Yi <jlee@suse.com>
---
 drivers/acpi/button.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -79,6 +79,19 @@ MODULE_DEVICE_TABLE(acpi, button_device_
 static const struct dmi_system_id dmi_lid_quirks[] = {
 	{
 		/*
+		 * Acer Switch 10 SW5-012. _LID method messes with home and
+		 * power button GPIO IRQ settings causing an interrupt storm on
+		 * both GPIOs. This is unfixable without a DSDT override, so we
+		 * have to disable the lid-switch functionality altogether :|
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"),
+		},
+		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_DISABLED,
+	},
+	{
+		/*
 		 * Asus T200TA, _LID keeps reporting closed after every second
 		 * openening of the lid. Causing immediate re-suspend after
 		 * opening every other open. Using LID_INIT_OPEN fixes this.