From: Lang Cheng <chenglang@huawei.com>
Date: Thu, 12 Mar 2020 17:50:24 +0800
Subject: RDMA/hns: Check if depth of qp is 0 before configure
Patch-mainline: v5.7-rc1
Git-commit: 026ded373483c07983a6a30b70034ad0f3667a44
References: jsc#SLE-14777

Depth of qp shouldn't be allowed to be set to zero, after ensuring that,
subsequent process can be simplified. And when qp is changed from reset to
reset, the capability of minimum qp depth was used to identify hardware of
hip06, it should be changed into a more readable form.

Link: https://lore.kernel.org/r/1584006624-11846-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/infiniband/hw/hns/hns_roce_qp.c |   77 +++++++++++++-------------------
 1 file changed, 33 insertions(+), 44 deletions(-)

--- a/drivers/infiniband/hw/hns/hns_roce_qp.c
+++ b/drivers/infiniband/hw/hns/hns_roce_qp.c
@@ -359,52 +359,44 @@ static int set_rq_size(struct hns_roce_d
 				struct ib_qp_cap *cap, bool is_user, int has_rq,
 				struct hns_roce_qp *hr_qp)
 {
-	struct ib_device *ibdev = &hr_dev->ib_dev;
 	u32 max_cnt;
 
-	/* Check the validity of QP support capacity */
-	if (cap->max_recv_wr > hr_dev->caps.max_wqes ||
-	    cap->max_recv_sge > hr_dev->caps.max_rq_sg) {
-		ibdev_err(ibdev, "Failed to check max recv WR %d and SGE %d\n",
-			  cap->max_recv_wr, cap->max_recv_sge);
-		return -EINVAL;
-	}
-
 	/* If srq exist, set zero for relative number of rq */
 	if (!has_rq) {
 		hr_qp->rq.wqe_cnt = 0;
 		hr_qp->rq.max_gs = 0;
 		cap->max_recv_wr = 0;
 		cap->max_recv_sge = 0;
-	} else {
-		if (is_user && (!cap->max_recv_wr || !cap->max_recv_sge)) {
-			ibdev_err(ibdev, "Failed to check user max recv WR and SGE\n");
-			return -EINVAL;
-		}
 
-		if (hr_dev->caps.min_wqes)
-			max_cnt = max(cap->max_recv_wr, hr_dev->caps.min_wqes);
-		else
-			max_cnt = cap->max_recv_wr;
+		return 0;
+	}
 
-		hr_qp->rq.wqe_cnt = roundup_pow_of_two(max_cnt);
+	/* Check the validity of QP support capacity */
+	if (!cap->max_recv_wr || cap->max_recv_wr > hr_dev->caps.max_wqes ||
+	    cap->max_recv_sge > hr_dev->caps.max_rq_sg) {
+		ibdev_err(&hr_dev->ib_dev, "RQ config error, depth=%u, sge=%d\n",
+			  cap->max_recv_wr, cap->max_recv_sge);
+		return -EINVAL;
+	}
 
-		if ((u32)hr_qp->rq.wqe_cnt > hr_dev->caps.max_wqes) {
-			ibdev_err(ibdev, "Failed to check RQ WQE count limit\n");
-			return -EINVAL;
-		}
+	max_cnt = max(cap->max_recv_wr, hr_dev->caps.min_wqes);
 
-		max_cnt = max(1U, cap->max_recv_sge);
-		hr_qp->rq.max_gs = roundup_pow_of_two(max_cnt);
-		if (hr_dev->caps.max_rq_sg <= HNS_ROCE_SGE_IN_WQE)
-			hr_qp->rq.wqe_shift =
-					ilog2(hr_dev->caps.max_rq_desc_sz);
-		else
-			hr_qp->rq.wqe_shift =
-					ilog2(hr_dev->caps.max_rq_desc_sz
-					      * hr_qp->rq.max_gs);
+	hr_qp->rq.wqe_cnt = roundup_pow_of_two(max_cnt);
+	if ((u32)hr_qp->rq.wqe_cnt > hr_dev->caps.max_wqes) {
+		ibdev_err(&hr_dev->ib_dev, "rq depth %u too large\n",
+			  cap->max_recv_wr);
+		return -EINVAL;
 	}
 
+	max_cnt = max(1U, cap->max_recv_sge);
+	hr_qp->rq.max_gs = roundup_pow_of_two(max_cnt);
+
+	if (hr_dev->caps.max_rq_sg <= HNS_ROCE_SGE_IN_WQE)
+		hr_qp->rq.wqe_shift = ilog2(hr_dev->caps.max_rq_desc_sz);
+	else
+		hr_qp->rq.wqe_shift = ilog2(hr_dev->caps.max_rq_desc_sz *
+					    hr_qp->rq.max_gs);
+
 	cap->max_recv_wr = hr_qp->rq.wqe_cnt;
 	cap->max_recv_sge = hr_qp->rq.max_gs;
 
@@ -613,29 +605,27 @@ static int set_extend_sge_param(struct h
 static int set_kernel_sq_size(struct hns_roce_dev *hr_dev,
 			      struct ib_qp_cap *cap, struct hns_roce_qp *hr_qp)
 {
-	struct device *dev = hr_dev->dev;
 	u32 page_size;
 	u32 max_cnt;
 	int size;
 	int ret;
 
-	if (cap->max_send_wr  > hr_dev->caps.max_wqes  ||
+	if (!cap->max_send_wr || cap->max_send_wr > hr_dev->caps.max_wqes ||
 	    cap->max_send_sge > hr_dev->caps.max_sq_sg ||
 	    cap->max_inline_data > hr_dev->caps.max_sq_inline) {
-		dev_err(dev, "SQ WR or sge or inline data error!\n");
+		ibdev_err(&hr_dev->ib_dev,
+			  "SQ WR or sge or inline data error!\n");
 		return -EINVAL;
 	}
 
 	hr_qp->sq.wqe_shift = ilog2(hr_dev->caps.max_sq_desc_sz);
 
-	if (hr_dev->caps.min_wqes)
-		max_cnt = max(cap->max_send_wr, hr_dev->caps.min_wqes);
-	else
-		max_cnt = cap->max_send_wr;
+	max_cnt = max(cap->max_send_wr, hr_dev->caps.min_wqes);
 
 	hr_qp->sq.wqe_cnt = roundup_pow_of_two(max_cnt);
 	if ((u32)hr_qp->sq.wqe_cnt > hr_dev->caps.max_wqes) {
-		dev_err(dev, "while setting kernel sq size, sq.wqe_cnt too large\n");
+		ibdev_err(&hr_dev->ib_dev,
+			  "while setting kernel sq size, sq.wqe_cnt too large\n");
 		return -EINVAL;
 	}
 
@@ -648,7 +638,7 @@ static int set_kernel_sq_size(struct hns
 
 	ret = set_extend_sge_param(hr_dev, hr_qp);
 	if (ret) {
-		dev_err(dev, "set extend sge parameters fail\n");
+		ibdev_err(&hr_dev->ib_dev, "set extend sge parameters fail\n");
 		return ret;
 	}
 
@@ -1372,11 +1362,10 @@ int hns_roce_modify_qp(struct ib_qp *ibq
 		goto out;
 
 	if (cur_state == new_state && cur_state == IB_QPS_RESET) {
-		if (hr_dev->caps.min_wqes) {
+		if (hr_dev->hw_rev == HNS_ROCE_HW_VER1) {
 			ret = -EPERM;
 			ibdev_err(&hr_dev->ib_dev,
-				"cur_state=%d new_state=%d\n", cur_state,
-				new_state);
+				  "RST2RST state is not supported\n");
 		} else {
 			ret = 0;
 		}