From: Damien Le Moal <damien.lemoal@wdc.com>
Date: Fri, 31 Jul 2020 14:49:28 +0900
Subject: [PATCH] scsi: sd_zbc: Improve zone revalidation
Git-commit: a3d8a2573687bc8955986e4e011ebfe19cc71054
Patch-mainline: v5.9-rc1
References: git-fixes
Currently, for zoned disks, since blk_revalidate_disk_zones() requires the
disk capacity to be set already to operate correctly, zones revalidation
can only be done on the second revalidate scan once the gendisk capacity is
set at the end of the first scan. As a result, if zone revalidation fails,
there is no second chance to recover from the failure and the disk capacity
is changed to 0, with the disk left unusable.
This can be improved by shuffling around code, specifically, by moving the
call to sd_zbc_revalidate_zones() from sd_zbc_read_zones() to the end of
sd_revalidate_disk(), after set_capacity_revalidate_and_notify() is called
to set the gendisk capacity. With this change, if sd_zbc_revalidate_zones()
fails on the first scan, the second scan will call it again to recover, if
possible.
Using the new struct scsi_disk fields rev_nr_zones and rev_zone_blocks,
sd_zbc_revalidate_zones() does actual work only if it detects a change with
the disk zone configuration. This means that for a successful zones
revalidation on the first scan, the second scan will not cause another
heavy full check.
While at it, remove the unecesary "extern" declaration of
sd_zbc_read_zones().
Link: https://lore.kernel.org/r/20200731054928.668547-1-damien.lemoal@wdc.com
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/sd.c | 10 ++++-
drivers/scsi/sd.h | 11 +++--
drivers/scsi/sd_zbc.c | 93 ++++++++++++++++++++-----------------------
3 files changed, 60 insertions(+), 54 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index acde0ca35769..95018e650f2d 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2578,8 +2578,6 @@ sd_print_capacity(struct scsi_disk *sdkp,
sd_printk(KERN_NOTICE, sdkp,
"%u-byte physical blocks\n",
sdkp->physical_block_size);
-
- sd_zbc_print_zones(sdkp);
}
/* called with buffer of length 512 */
@@ -3220,6 +3218,14 @@ static int sd_revalidate_disk(struct gendisk *disk)
sd_config_write_same(sdkp);
kfree(buffer);
+ /*
+ * For a zoned drive, revalidating the zones can be done only once
+ * the gendisk capacity is set. So if this fails, set back the gendisk
+ * capacity to 0.
+ */
+ if (sd_zbc_revalidate_zones(sdkp))
+ set_capacity_revalidate_and_notify(disk, 0, false);
+
out:
return 0;
}
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 27c0f4e9b1d4..4933e7daf17d 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -75,7 +75,9 @@ struct scsi_disk {
struct opal_dev *opal_dev;
#ifdef CONFIG_BLK_DEV_ZONED
u32 nr_zones;
+ u32 rev_nr_zones;
u32 zone_blocks;
+ u32 rev_zone_blocks;
u32 zones_optimal_open;
u32 zones_optimal_nonseq;
u32 zones_max_open;
@@ -215,8 +217,8 @@ static inline int sd_is_zoned(struct scsi_disk *sdkp)
int sd_zbc_init_disk(struct scsi_disk *sdkp);
void sd_zbc_release_disk(struct scsi_disk *sdkp);
-extern int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buffer);
-extern void sd_zbc_print_zones(struct scsi_disk *sdkp);
+int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buffer);
+int sd_zbc_revalidate_zones(struct scsi_disk *sdkp);
blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
unsigned char op, bool all);
unsigned int sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
@@ -242,7 +244,10 @@ static inline int sd_zbc_read_zones(struct scsi_disk *sdkp,
return 0;
}
-static inline void sd_zbc_print_zones(struct scsi_disk *sdkp) {}
+static inline int sd_zbc_revalidate_zones(struct scsi_disk *sdkp)
+{
+ return 0;
+}
static inline blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
unsigned char op,
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index 35d929b00a0b..fee0815d7e65 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -633,6 +633,23 @@ static int sd_zbc_check_capacity(struct scsi_disk *sdkp, unsigned char *buf,
return 0;
}
+static void sd_zbc_print_zones(struct scsi_disk *sdkp)
+{
+ if (!sd_is_zoned(sdkp) || !sdkp->capacity)
+ return;
+
+ if (sdkp->capacity & (sdkp->zone_blocks - 1))
+ sd_printk(KERN_NOTICE, sdkp,
+ "%u zones of %u logical blocks + 1 runt zone\n",
+ sdkp->nr_zones - 1,
+ sdkp->zone_blocks);
+ else
+ sd_printk(KERN_NOTICE, sdkp,
+ "%u zones of %u logical blocks\n",
+ sdkp->nr_zones,
+ sdkp->zone_blocks);
+}
+
static void sd_zbc_revalidate_zones_cb(struct gendisk *disk)
{
struct scsi_disk *sdkp = scsi_disk(disk);
@@ -640,36 +657,31 @@ static void sd_zbc_revalidate_zones_cb(struct gendisk *disk)
swap(sdkp->zones_wp_offset, sdkp->rev_wp_offset);
}
-static int sd_zbc_revalidate_zones(struct scsi_disk *sdkp,
- u32 zone_blocks,
- unsigned int nr_zones)
+int sd_zbc_revalidate_zones(struct scsi_disk *sdkp)
{
struct gendisk *disk = sdkp->disk;
+ struct request_queue *q = disk->queue;
+ u32 zone_blocks = sdkp->rev_zone_blocks;
+ unsigned int nr_zones = sdkp->rev_nr_zones;
+ u32 max_append;
int ret = 0;
+ if (!sd_is_zoned(sdkp))
+ return 0;
+
/*
* Make sure revalidate zones are serialized to ensure exclusive
* updates of the scsi disk data.
*/
mutex_lock(&sdkp->rev_mutex);
- /*
- * Revalidate the disk zones to update the device request queue zone
- * bitmaps and the zone write pointer offset array. Do this only once
- * the device capacity is set on the second revalidate execution for
- * disk scan or if something changed when executing a normal revalidate.
- */
- if (sdkp->first_scan) {
- sdkp->zone_blocks = zone_blocks;
- sdkp->nr_zones = nr_zones;
- goto unlock;
- }
-
if (sdkp->zone_blocks == zone_blocks &&
sdkp->nr_zones == nr_zones &&
disk->queue->nr_zones == nr_zones)
goto unlock;
+ sdkp->zone_blocks = zone_blocks;
+ sdkp->nr_zones = nr_zones;
sdkp->rev_wp_offset = kvcalloc(nr_zones, sizeof(u32), GFP_NOIO);
if (!sdkp->rev_wp_offset) {
ret = -ENOMEM;
@@ -681,6 +693,21 @@ static int sd_zbc_revalidate_zones(struct scsi_disk *sdkp,
kvfree(sdkp->rev_wp_offset);
sdkp->rev_wp_offset = NULL;
+ if (ret) {
+ sdkp->zone_blocks = 0;
+ sdkp->nr_zones = 0;
+ sdkp->capacity = 0;
+ goto unlock;
+ }
+
+ max_append = min_t(u32, logical_to_sectors(sdkp->device, zone_blocks),
+ q->limits.max_segments << (PAGE_SHIFT - 9));
+ max_append = min_t(u32, max_append, queue_max_hw_sectors(q));
+
+ blk_queue_max_zone_append_sectors(q, max_append);
+
+ sd_zbc_print_zones(sdkp);
+
unlock:
mutex_unlock(&sdkp->rev_mutex);
@@ -693,7 +720,6 @@ int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buf)
struct request_queue *q = disk->queue;
unsigned int nr_zones;
u32 zone_blocks = 0;
- u32 max_append;
int ret;
if (!sd_is_zoned(sdkp))
@@ -722,22 +748,8 @@ int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buf)
sdkp->device->use_16_for_rw = 1;
sdkp->device->use_10_for_rw = 0;
- ret = sd_zbc_revalidate_zones(sdkp, zone_blocks, nr_zones);
- if (ret)
- goto err;
-
- /*
- * On the first scan 'chunk_sectors' isn't setup yet, so calling
- * blk_queue_max_zone_append_sectors() will result in a WARN(). Defer
- * this setting to the second scan.
- */
- if (sdkp->first_scan)
- return 0;
-
- max_append = min_t(u32, logical_to_sectors(sdkp->device, zone_blocks),
- q->limits.max_segments << (PAGE_SHIFT - 9));
-
- blk_queue_max_zone_append_sectors(q, max_append);
+ sdkp->rev_nr_zones = nr_zones;
+ sdkp->rev_zone_blocks = zone_blocks;
return 0;
@@ -747,23 +759,6 @@ int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buf)
return ret;
}
-void sd_zbc_print_zones(struct scsi_disk *sdkp)
-{
- if (!sd_is_zoned(sdkp) || !sdkp->capacity)
- return;
-
- if (sdkp->capacity & (sdkp->zone_blocks - 1))
- sd_printk(KERN_NOTICE, sdkp,
- "%u zones of %u logical blocks + 1 runt zone\n",
- sdkp->nr_zones - 1,
- sdkp->zone_blocks);
- else
- sd_printk(KERN_NOTICE, sdkp,
- "%u zones of %u logical blocks\n",
- sdkp->nr_zones,
- sdkp->zone_blocks);
-}
-
int sd_zbc_init_disk(struct scsi_disk *sdkp)
{
if (!sd_is_zoned(sdkp))
--
2.29.2