From b00ac4c081387ccc3855de33fcea5f3d09e2e40e Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Wed, 15 Apr 2020 18:50:55 +0200
Subject: ARM/fbdev: sa11x0: Switch to use GPIO descriptors
Git-commit: 5e4096ef03dcabd39e1d98856cd92f7359bc13e0
Patch-mainline: v5.8-rc1
References: jsc#SLE-12680, jsc#SLE-12880, jsc#SLE-12882, jsc#SLE-12883, jsc#SLE-13496, jsc#SLE-15322

This converts the SA11x0 frame buffer driver to use
GPIO descriptors. Get the GPIO optional and register
a look-up table specifically for the Shannon machine.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415165055.193113-1-linus.walleij@linaro.org
Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de>
---
 drivers/video/fbdev/sa1100fb.c | 20 +++++++++-----------
 drivers/video/fbdev/sa1100fb.h |  3 +++
 2 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/video/fbdev/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
index 2d285cc384cf..3e6e13f7a831 100644
--- a/drivers/video/fbdev/sa1100fb.c
+++ b/drivers/video/fbdev/sa1100fb.c
@@ -173,7 +173,7 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/mutex.h>
@@ -799,8 +799,8 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
 	writel_relaxed(fbi->dbar2, fbi->base + DBAR2);
 	writel_relaxed(fbi->reg_lccr0 | LCCR0_LEN, fbi->base + LCCR0);
 
-	if (machine_is_shannon())
-		gpio_set_value(SHANNON_GPIO_DISP_EN, 1);
+	if (fbi->shannon_lcden)
+		gpiod_set_value(fbi->shannon_lcden, 1);
 
 	dev_dbg(fbi->dev, "DBAR1: 0x%08x\n", readl_relaxed(fbi->base + DBAR1));
 	dev_dbg(fbi->dev, "DBAR2: 0x%08x\n", readl_relaxed(fbi->base + DBAR2));
@@ -817,8 +817,8 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 
 	dev_dbg(fbi->dev, "Disabling LCD controller\n");
 
-	if (machine_is_shannon())
-		gpio_set_value(SHANNON_GPIO_DISP_EN, 0);
+	if (fbi->shannon_lcden)
+		gpiod_set_value(fbi->shannon_lcden, 0);
 
 	set_current_state(TASK_UNINTERRUPTIBLE);
 	add_wait_queue(&fbi->ctrlr_wait, &wait);
@@ -1173,12 +1173,10 @@ static int sa1100fb_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	if (machine_is_shannon()) {
-		ret = devm_gpio_request_one(&pdev->dev, SHANNON_GPIO_DISP_EN,
-			GPIOF_OUT_INIT_LOW, "display enable");
-		if (ret)
-			return ret;
-	}
+	fbi->shannon_lcden = gpiod_get_optional(&pdev->dev, "shannon-lcden",
+						GPIOD_OUT_LOW);
+	if (IS_ERR(fbi->shannon_lcden))
+		return PTR_ERR(fbi->shannon_lcden);
 
 	/* Initialize video memory */
 	ret = sa1100fb_map_video_memory(fbi);
diff --git a/drivers/video/fbdev/sa1100fb.h b/drivers/video/fbdev/sa1100fb.h
index d0aa33b0b88a..b4363444fa5d 100644
--- a/drivers/video/fbdev/sa1100fb.h
+++ b/drivers/video/fbdev/sa1100fb.h
@@ -10,6 +10,8 @@
  * for more details.
  */
 
+struct gpio_desc;
+
 #define LCCR0           0x0000          /* LCD Control Reg. 0 */
 #define LCSR            0x0004          /* LCD Status Reg. */
 #define DBAR1           0x0010          /* LCD DMA Base Address Reg. channel 1 */
@@ -33,6 +35,7 @@ struct sa1100fb_info {
 	struct device		*dev;
 	const struct sa1100fb_rgb *rgb[NR_RGB];
 	void __iomem		*base;
+	struct gpio_desc	*shannon_lcden;
 
 	/*
 	 * These are the addresses we mapped
-- 
2.28.0