From 504949a9e46894e9bad343aa658a2c6e91606613 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jos=C3=A9=20Roberto=20de=20Souza?= <jose.souza@intel.com>
Date: Thu, 5 Dec 2019 13:03:50 -0800
Subject: drm/i915/display: Refactor intel_commit_modeset_disables()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Git-commit: ad457191015a197b3daf1a259ed8e7f70bf68bb9
Patch-mainline: v5.6-rc1
References: jsc#SLE-12680, jsc#SLE-12880, jsc#SLE-12882, jsc#SLE-12883, jsc#SLE-13496, jsc#SLE-15322
Commit 9c722e17c1b9 ("drm/i915: Disable pipes in reverse order")
reverted the order that pipes gets disabled because of TGL
master/slave relationship between transcoders in MST mode.
But as stated in a comment in skl_commit_modeset_enables() the
enabling order is not always crescent, possibly causing previously
selected slave transcoder being enabled before master so another
approach will be needed to select a transcoder to master in MST mode.
It will be similar to the approach taken in port sync.
But instead of implement something like
intel_trans_port_sync_modeset_disables() to MST lets simply it and
iterate over all pipes 2 times, the first one disabling any slave and
then disabling everything else.
The MST bits will be added in another patch.
v2:
Not using crtc->active as it is deprecated
v3:
Removing is_trans_port_sync_mode() check, just check for
is_trans_port_sync_master() is enough
v4:
Adding and using is_trans_port_sync_slave(), otherwise non-port sync
pipes will be disabled in the first loop, what is not wrong but is
not what patch description promises
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v2)
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205210350.96795-3-jose.souza@intel.com
Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de>
---
drivers/gpu/drm/i915/display/intel_display.c | 88 +++++++-------------
1 file changed, 32 insertions(+), 56 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index f7d1284b434d..80c9168ec36f 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -561,6 +561,12 @@ is_trans_port_sync_master(const struct intel_crtc_state *crtc_state)
crtc_state->sync_mode_slaves_mask);
}
+static bool
+is_trans_port_sync_slave(const struct intel_crtc_state *crtc_state)
+{
+ return crtc_state->master_transcoder != INVALID_TRANSCODER;
+}
+
/*
* Platform specific helpers to calculate the port PLL loopback- (clock.m),
* and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
@@ -14388,77 +14394,47 @@ static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
dev_priv->display.initial_watermarks(state, crtc);
}
-static void intel_trans_port_sync_modeset_disables(struct intel_atomic_state *state,
- struct intel_crtc *crtc,
- struct intel_crtc_state *old_crtc_state,
- struct intel_crtc_state *new_crtc_state)
-{
- struct intel_crtc *slave_crtc = intel_get_slave_crtc(new_crtc_state);
- struct intel_crtc_state *new_slave_crtc_state =
- intel_atomic_get_new_crtc_state(state, slave_crtc);
- struct intel_crtc_state *old_slave_crtc_state =
- intel_atomic_get_old_crtc_state(state, slave_crtc);
-
- WARN_ON(!slave_crtc || !new_slave_crtc_state ||
- !old_slave_crtc_state);
-
- /* Disable Slave first */
- intel_pre_plane_update(state, slave_crtc);
- if (old_slave_crtc_state->hw.active)
- intel_old_crtc_state_disables(state,
- old_slave_crtc_state,
- new_slave_crtc_state,
- slave_crtc);
-
- /* Disable Master */
- intel_pre_plane_update(state, crtc);
- if (old_crtc_state->hw.active)
- intel_old_crtc_state_disables(state,
- old_crtc_state,
- new_crtc_state,
- crtc);
-}
-
static void intel_commit_modeset_disables(struct intel_atomic_state *state)
{
struct intel_crtc_state *new_crtc_state, *old_crtc_state;
struct intel_crtc *crtc;
+ u32 handled = 0;
int i;
- /*
- * Disable CRTC/pipes in reverse order because some features(MST in
- * TGL+) requires master and slave relationship between pipes, so it
- * should always pick the lowest pipe as master as it will be enabled
- * first and disable in the reverse order so the master will be the
- * last one to be disabled.
- */
- for_each_oldnew_intel_crtc_in_state_reverse(state, crtc, old_crtc_state,
- new_crtc_state, i) {
+ /* Only disable port sync slaves */
+ for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
+ new_crtc_state, i) {
if (!needs_modeset(new_crtc_state))
continue;
+ if (!old_crtc_state->hw.active)
+ continue;
+
/* In case of Transcoder port Sync master slave CRTCs can be
* assigned in any order and we need to make sure that
* slave CRTCs are disabled first and then master CRTC since
* Slave vblanks are masked till Master Vblanks.
*/
- if (is_trans_port_sync_mode(old_crtc_state)) {
- if (is_trans_port_sync_master(old_crtc_state))
- intel_trans_port_sync_modeset_disables(state,
- crtc,
- old_crtc_state,
- new_crtc_state);
- else
- continue;
- } else {
- intel_pre_plane_update(state, crtc);
+ if (!is_trans_port_sync_slave(old_crtc_state))
+ continue;
- if (old_crtc_state->hw.active)
- intel_old_crtc_state_disables(state,
- old_crtc_state,
- new_crtc_state,
- crtc);
- }
+ intel_pre_plane_update(state, crtc);
+ intel_old_crtc_state_disables(state, old_crtc_state,
+ new_crtc_state, crtc);
+ handled |= BIT(crtc->pipe);
+ }
+
+ /* Disable everything else left on */
+ for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
+ new_crtc_state, i) {
+ if (!needs_modeset(new_crtc_state) ||
+ (handled & BIT(crtc->pipe)))
+ continue;
+
+ intel_pre_plane_update(state, crtc);
+ if (old_crtc_state->hw.active)
+ intel_old_crtc_state_disables(state, old_crtc_state,
+ new_crtc_state, crtc);
}
}
--
2.28.0