From: Masahiro Yamada <yamada.masahiro@socionext.com>
Date: Fri, 23 Aug 2019 11:58:08 +0900
Subject: ARM: OMAP2+: move platform-specific asm-offset.h to
arch/arm/mach-omap2
Git-commit: ccf4975dca233b1d6a74752d6ab35c239edc0d58
Patch-mainline: 5.4-rc1
References: bnc#1151927 5.3.4
<generated/ti-pm-asm-offsets.h> is only generated and included by
arch/arm/mach-omap2/, so it does not need to reside in the globally
visible include/generated/.
I renamed it to arch/arm/mach-omap2/pm-asm-offsets.h since the prefix
'ti-' is just redundant in mach-omap2/.
My main motivation of this change is to avoid the race condition for
the parallel build (-j) when CONFIG_IKHEADERS is enabled.
When it is enabled, all the headers under include/ are archived into
kernel/kheaders_data.tar.xz and exposed in the sysfs.
In the parallel build, we have no idea in which order files are built.
- If ti-pm-asm-offsets.h is built before kheaders_data.tar.xz,
the header will be included in the archive. Probably nobody will
use it, but it is harmless except that it will increase the archive
size needlessly.
- If kheaders_data.tar.xz is built before ti-pm-asm-offsets.h,
the header will not be included in the archive. However, in the next
build, the archive will be re-generated to include the newly-found
ti-pm-asm-offsets.h. This is not nice from the build system point
of view.
- If ti-pm-asm-offsets.h and kheaders_data.tar.xz are built at the
same time, the corrupted header might be included in the archive,
which does not look nice either.
This commit fixes the race.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
arch/arm/mach-omap2/.gitignore | 1 +
arch/arm/mach-omap2/Makefile | 5 +++--
arch/arm/mach-omap2/sleep33xx.S | 2 +-
arch/arm/mach-omap2/sleep43xx.S | 2 +-
4 files changed, 6 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/mach-omap2/.gitignore
--- /dev/null
+++ b/arch/arm/mach-omap2/.gitignore
@@ -0,0 +1 @@
+pm-asm-offsets.h
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -223,11 +223,12 @@ obj-y += omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
-include/generated/ti-pm-asm-offsets.h: arch/arm/mach-omap2/pm-asm-offsets.s FORCE
+$(obj)/pm-asm-offsets.h: $(obj)/pm-asm-offsets.s FORCE
$(call filechk,offsets,__TI_PM_ASM_OFFSETS_H__)
-$(obj)/sleep33xx.o $(obj)/sleep43xx.o: include/generated/ti-pm-asm-offsets.h
+$(obj)/sleep33xx.o $(obj)/sleep43xx.o: $(obj)/pm-asm-offsets.h
targets += pm-asm-offsets.s
+clean-files += pm-asm-offsets.h
obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o
--- a/arch/arm/mach-omap2/sleep33xx.S
+++ b/arch/arm/mach-omap2/sleep33xx.S
@@ -6,7 +6,6 @@
* Dave Gerlach, Vaibhav Bedia
*/
-#include <generated/ti-pm-asm-offsets.h>
#include <linux/linkage.h>
#include <linux/platform_data/pm33xx.h>
#include <linux/ti-emif-sram.h>
@@ -15,6 +14,7 @@
#include "iomap.h"
#include "cm33xx.h"
+#include "pm-asm-offsets.h"
#define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED 0x00030000
#define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE 0x0003
--- a/arch/arm/mach-omap2/sleep43xx.S
+++ b/arch/arm/mach-omap2/sleep43xx.S
@@ -6,7 +6,6 @@
* Dave Gerlach, Vaibhav Bedia
*/
-#include <generated/ti-pm-asm-offsets.h>
#include <linux/linkage.h>
#include <linux/ti-emif-sram.h>
#include <linux/platform_data/pm33xx.h>
@@ -19,6 +18,7 @@
#include "iomap.h"
#include "omap-secure.h"
#include "omap44xx.h"
+#include "pm-asm-offsets.h"
#include "prm33xx.h"
#include "prcm43xx.h"