From: Jon Hunter <jonathanh@nvidia.com>
Date: Mon, 24 Aug 2020 15:59:07 +0100
Subject: cpufreq: tegra186: Fix initial frequency

Git-commit: b89c01c960511dcffe3666d89645c95445d00902
Patch-mainline: v5.10-rc1
References: jsc#SLE-15847

Commit 6cc3d0e9a097 ("cpufreq: tegra186: add
CPUFREQ_NEED_INITIAL_FREQ_CHECK flag") fixed CPUFREQ support for
Tegra186 but as a consequence the following warnings are now seen on
boot ...

 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 0 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 2035200 KHz
 cpufreq: cpufreq_online: CPU1: Running at unlisted freq: 0 KHz
 cpufreq: cpufreq_online: CPU1: Unlisted initial frequency changed to: 2035200 KHz
 cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 0 KHz
 cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 2035200 KHz
 cpufreq: cpufreq_online: CPU3: Running at unlisted freq: 0 KHz
 cpufreq: cpufreq_online: CPU3: Unlisted initial frequency changed to: 2035200 KHz
 cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 0 KHz
 cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 2035200 KHz
 cpufreq: cpufreq_online: CPU5: Running at unlisted freq: 0 KHz
 cpufreq: cpufreq_online: CPU5: Unlisted initial frequency changed to: 2035200 KHz

Fix this by adding a 'get' callback for the Tegra186 CPUFREQ driver to
retrieve the current operating frequency for a given CPU. The 'get'
callback uses the current 'ndiv' value that is programmed to determine
that current operating frequency.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
[ Viresh: Return 0 on error ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
---
 drivers/cpufreq/tegra186-cpufreq.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/cpufreq/tegra186-cpufreq.c b/drivers/cpufreq/tegra186-cpufreq.c
index 01e1f58ba422..4b4079f51559 100644
--- a/drivers/cpufreq/tegra186-cpufreq.c
+++ b/drivers/cpufreq/tegra186-cpufreq.c
@@ -14,6 +14,7 @@
 
 #define EDVD_CORE_VOLT_FREQ(core)		(0x20 + (core) * 0x4)
 #define EDVD_CORE_VOLT_FREQ_F_SHIFT		0
+#define EDVD_CORE_VOLT_FREQ_F_MASK		0xffff
 #define EDVD_CORE_VOLT_FREQ_V_SHIFT		16
 
 struct tegra186_cpufreq_cluster_info {
@@ -91,10 +92,39 @@ static int tegra186_cpufreq_set_target(struct cpufreq_policy *policy,
 	return 0;
 }
 
+static unsigned int tegra186_cpufreq_get(unsigned int cpu)
+{
+	struct cpufreq_frequency_table *tbl;
+	struct cpufreq_policy *policy;
+	void __iomem *edvd_reg;
+	unsigned int i, freq = 0;
+	u32 ndiv;
+
+	policy = cpufreq_cpu_get(cpu);
+	if (!policy)
+		return 0;
+
+	tbl = policy->freq_table;
+	edvd_reg = policy->driver_data;
+	ndiv = readl(edvd_reg) & EDVD_CORE_VOLT_FREQ_F_MASK;
+
+	for (i = 0; tbl[i].frequency != CPUFREQ_TABLE_END; i++) {
+		if ((tbl[i].driver_data & EDVD_CORE_VOLT_FREQ_F_MASK) == ndiv) {
+			freq = tbl[i].frequency;
+			break;
+		}
+	}
+
+	cpufreq_cpu_put(policy);
+
+	return freq;
+}
+
 static struct cpufreq_driver tegra186_cpufreq_driver = {
 	.name = "tegra186",
 	.flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
 			CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.get = tegra186_cpufreq_get,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = tegra186_cpufreq_set_target,
 	.init = tegra186_cpufreq_init,
-- 
2.26.2