From: Ioana Ciornei <ioana.ciornei@nxp.com>
Date: Fri, 15 May 2020 15:30:22 +0300
Subject: dpaa2-eth: properly handle buffer size restrictions
Git-commit: efa6a7d07523ffbbf6503c1a7eeb52201c15c0e3
Patch-mainline: 5.7-rc6
References: networking-stable-20_05_16
Depending on the WRIOP version, the buffer size on the RX path must by a
multiple of 64 or 256. Handle this restriction properly by aligning down
the buffer size to the necessary value. Also, use the new buffer size
dynamically computed instead of the compile time one.
Fixes: 27c874867c4e ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 29 +++++++++++++----------
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 1
2 files changed, 18 insertions(+), 12 deletions(-)
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -86,7 +86,7 @@ static void free_rx_fd(struct dpaa2_eth_
for (i = 1; i < DPAA2_ETH_MAX_SG_ENTRIES; i++) {
addr = dpaa2_sg_get_addr(&sgt[i]);
sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr);
- dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+ dma_unmap_page(dev, addr, priv->rx_buf_size,
DMA_BIDIRECTIONAL);
free_pages((unsigned long)sg_vaddr, 0);
@@ -144,7 +144,7 @@ static struct sk_buff *build_frag_skb(st
/* Get the address and length from the S/G entry */
sg_addr = dpaa2_sg_get_addr(sge);
sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, sg_addr);
- dma_unmap_page(dev, sg_addr, DPAA2_ETH_RX_BUF_SIZE,
+ dma_unmap_page(dev, sg_addr, priv->rx_buf_size,
DMA_BIDIRECTIONAL);
sg_length = dpaa2_sg_get_len(sge);
@@ -185,7 +185,7 @@ static struct sk_buff *build_frag_skb(st
(page_address(page) - page_address(head_page));
skb_add_rx_frag(skb, i - 1, head_page, page_offset,
- sg_length, DPAA2_ETH_RX_BUF_SIZE);
+ sg_length, priv->rx_buf_size);
}
if (dpaa2_sg_is_final(sge))
@@ -211,7 +211,7 @@ static void free_bufs(struct dpaa2_eth_p
for (i = 0; i < count; i++) {
vaddr = dpaa2_iova_to_virt(priv->iommu_domain, buf_array[i]);
- dma_unmap_page(dev, buf_array[i], DPAA2_ETH_RX_BUF_SIZE,
+ dma_unmap_page(dev, buf_array[i], priv->rx_buf_size,
DMA_BIDIRECTIONAL);
free_pages((unsigned long)vaddr, 0);
}
@@ -331,7 +331,7 @@ static u32 run_xdp(struct dpaa2_eth_priv
break;
case XDP_REDIRECT:
dma_unmap_page(priv->net_dev->dev.parent, addr,
- DPAA2_ETH_RX_BUF_SIZE, DMA_BIDIRECTIONAL);
+ priv->rx_buf_size, DMA_BIDIRECTIONAL);
ch->buf_count--;
xdp.data_hard_start = vaddr;
err = xdp_do_redirect(priv->net_dev, &xdp, xdp_prog);
@@ -370,7 +370,7 @@ static void dpaa2_eth_rx(struct dpaa2_et
trace_dpaa2_rx_fd(priv->net_dev, fd);
vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr);
- dma_sync_single_for_cpu(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+ dma_sync_single_for_cpu(dev, addr, priv->rx_buf_size,
DMA_BIDIRECTIONAL);
fas = dpaa2_get_fas(vaddr, false);
@@ -389,13 +389,13 @@ static void dpaa2_eth_rx(struct dpaa2_et
return;
}
- dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+ dma_unmap_page(dev, addr, priv->rx_buf_size,
DMA_BIDIRECTIONAL);
skb = build_linear_skb(ch, fd, vaddr);
} else if (fd_format == dpaa2_fd_sg) {
WARN_ON(priv->xdp_prog);
- dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+ dma_unmap_page(dev, addr, priv->rx_buf_size,
DMA_BIDIRECTIONAL);
skb = build_frag_skb(priv, ch, buf_data);
free_pages((unsigned long)vaddr, 0);
@@ -963,7 +963,7 @@ static int add_bufs(struct dpaa2_eth_pri
if (!page)
goto err_alloc;
- addr = dma_map_page(dev, page, 0, DPAA2_ETH_RX_BUF_SIZE,
+ addr = dma_map_page(dev, page, 0, priv->rx_buf_size,
DMA_BIDIRECTIONAL);
if (unlikely(dma_mapping_error(dev, addr)))
goto err_map;
@@ -973,7 +973,7 @@ static int add_bufs(struct dpaa2_eth_pri
/* tracing point */
trace_dpaa2_eth_buf_seed(priv->net_dev,
page, DPAA2_ETH_RX_BUF_RAW_SIZE,
- addr, DPAA2_ETH_RX_BUF_SIZE,
+ addr, priv->rx_buf_size,
bpid);
}
@@ -1617,7 +1617,7 @@ static bool xdp_mtu_valid(struct dpaa2_e
int mfl, linear_mfl;
mfl = DPAA2_ETH_L2_MAX_FRM(mtu);
- linear_mfl = DPAA2_ETH_RX_BUF_SIZE - DPAA2_ETH_RX_HWA_SIZE -
+ linear_mfl = priv->rx_buf_size - DPAA2_ETH_RX_HWA_SIZE -
dpaa2_eth_rx_head_room(priv) - XDP_PACKET_HEADROOM;
if (mfl > linear_mfl) {
@@ -2366,6 +2366,11 @@ static int set_buffer_layout(struct dpaa
else
rx_buf_align = DPAA2_ETH_RX_BUF_ALIGN;
+ /* We need to ensure that the buffer size seen by WRIOP is a multiple
+ * of 64 or 256 bytes depending on the WRIOP version.
+ */
+ priv->rx_buf_size = ALIGN_DOWN(DPAA2_ETH_RX_BUF_SIZE, rx_buf_align);
+
/* tx buffer */
buf_layout.private_data_size = DPAA2_ETH_SWA_SIZE;
buf_layout.pass_timestamp = true;
@@ -3006,7 +3011,7 @@ static int bind_dpni(struct dpaa2_eth_pr
pools_params.num_dpbp = 1;
pools_params.pools[0].dpbp_id = priv->dpbp_dev->obj_desc.id;
pools_params.pools[0].backup_pool = 0;
- pools_params.pools[0].buffer_size = DPAA2_ETH_RX_BUF_SIZE;
+ pools_params.pools[0].buffer_size = priv->rx_buf_size;
err = dpni_set_pools(priv->mc_io, 0, priv->mc_token, &pools_params);
if (err) {
dev_err(dev, "dpni_set_pools() failed\n");
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
@@ -373,6 +373,7 @@ struct dpaa2_eth_priv {
u16 tx_data_offset;
struct fsl_mc_device *dpbp_dev;
+ u16 rx_buf_size;
u16 bpid;
struct iommu_domain *iommu_domain;