From: Ard Biesheuvel <ardb@kernel.org>
Date: Sun, 7 Jun 2020 15:41:35 +0200
Subject: efi/libstub: arm: Print CPU boot mode and MMU state at boot
Patch-mainline: v5.8-rc3
Git-commit: 2a55280a3675203496d302463b941834228b9875
References: jsc#SLE-16407
On 32-bit ARM, we may boot at HYP mode, or with the MMU and caches off
(or both), even though the EFI spec does not actually support this.
While booting at HYP mode is something we might tolerate, fiddling
with the caches is a more serious issue, as disabling the caches is
tricky to do safely from C code, and running without the Dcache makes
it impossible to support unaligned memory accesses, which is another
explicit requirement imposed by the EFI spec.
So take note of the CPU mode and MMU state in the EFI stub diagnostic
output so that we can easily diagnose any issues that may arise from
this. E.g.,
EFI stub: Entering in SVC mode with MMU enabled
Also, capture the CPSR and SCTLR system register values at EFI stub
entry, and after ExitBootServices() returns, and check whether the
MMU and Dcache were disabled at any point. If this is the case, a
diagnostic message like the following will be emitted:
efi: [Firmware Bug]: EFI stub was entered with MMU and Dcache disabled, please fix your firmware!
efi: CPSR at EFI stub entry : 0x600001d3
efi: SCTLR at EFI stub entry : 0x00c51838
efi: CPSR after ExitBootServices() : 0x600001d3
efi: SCTLR after ExitBootServices(): 0x00c50838
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Lee, Chun-Yi <jlee@suse.com>
---
arch/arm/include/asm/efi.h | 7 +++
drivers/firmware/efi/arm-init.c | 34 +++++++++++++++++-
drivers/firmware/efi/libstub/arm32-stub.c | 54 +++++++++++++++++++++++++++++-
drivers/firmware/efi/libstub/efi-stub.c | 3 +
drivers/firmware/efi/libstub/efistub.h | 2 +
include/linux/efi.h | 1
6 files changed, 98 insertions(+), 3 deletions(-)
--- a/arch/arm/include/asm/efi.h
+++ b/arch/arm/include/asm/efi.h
@@ -88,4 +88,11 @@ static inline unsigned long efi_get_max_
return dram_base + SZ_512M;
}
+struct efi_arm_entry_state {
+ u32 cpsr_before_ebs;
+ u32 sctlr_before_ebs;
+ u32 cpsr_after_ebs;
+ u32 sctlr_after_ebs;
+};
+
#endif /* _ASM_ARM_EFI_H */
--- a/drivers/firmware/efi/arm-init.c
+++ b/drivers/firmware/efi/arm-init.c
@@ -52,9 +52,11 @@ static phys_addr_t __init efi_to_phys(un
}
static __initdata unsigned long screen_info_table = EFI_INVALID_TABLE_ADDR;
+static __initdata unsigned long cpu_state_table = EFI_INVALID_TABLE_ADDR;
static const efi_config_table_type_t arch_tables[] __initconst = {
{LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID, &screen_info_table},
+ {LINUX_EFI_ARM_CPU_STATE_TABLE_GUID, &cpu_state_table},
{}
};
@@ -240,9 +242,37 @@ void __init efi_init(void)
init_screen_info();
+#ifdef CONFIG_ARM
/* ARM does not permit early mappings to persist across paging_init() */
- if (IS_ENABLED(CONFIG_ARM))
- efi_memmap_unmap();
+ efi_memmap_unmap();
+
+ if (cpu_state_table != EFI_INVALID_TABLE_ADDR) {
+ struct efi_arm_entry_state *state;
+ bool dump_state = true;
+
+ state = early_memremap_ro(cpu_state_table,
+ sizeof(struct efi_arm_entry_state));
+ if (state == NULL) {
+ pr_warn("Unable to map CPU entry state table.\n");
+ return;
+ }
+
+ if ((state->sctlr_before_ebs & 1) == 0)
+ pr_warn(FW_BUG "EFI stub was entered with MMU and Dcache disabled, please fix your firmware!\n");
+ else if ((state->sctlr_after_ebs & 1) == 0)
+ pr_warn(FW_BUG "ExitBootServices() returned with MMU and Dcache disabled, please fix your firmware!\n");
+ else
+ dump_state = false;
+
+ if (dump_state || efi_enabled(EFI_DBG)) {
+ pr_info("CPSR at EFI stub entry : 0x%08x\n", state->cpsr_before_ebs);
+ pr_info("SCTLR at EFI stub entry : 0x%08x\n", state->sctlr_before_ebs);
+ pr_info("CPSR after ExitBootServices() : 0x%08x\n", state->cpsr_after_ebs);
+ pr_info("SCTLR after ExitBootServices(): 0x%08x\n", state->sctlr_after_ebs);
+ }
+ early_memunmap(state, sizeof(struct efi_arm_entry_state));
+ }
+#endif
}
static bool efifb_overlaps_pci_range(const struct of_pci_range *range)
--- a/drivers/firmware/efi/libstub/arm32-stub.c
+++ b/drivers/firmware/efi/libstub/arm32-stub.c
@@ -7,10 +7,49 @@
#include "efistub.h"
+static efi_guid_t cpu_state_guid = LINUX_EFI_ARM_CPU_STATE_TABLE_GUID;
+
+struct efi_arm_entry_state *efi_entry_state;
+
+static void get_cpu_state(u32 *cpsr, u32 *sctlr)
+{
+ asm("mrs %0, cpsr" : "=r"(*cpsr));
+ if ((*cpsr & MODE_MASK) == HYP_MODE)
+ asm("mrc p15, 4, %0, c1, c0, 0" : "=r"(*sctlr));
+ else
+ asm("mrc p15, 0, %0, c1, c0, 0" : "=r"(*sctlr));
+}
+
efi_status_t check_platform_features(void)
{
+ efi_status_t status;
+ u32 cpsr, sctlr;
int block;
+ get_cpu_state(&cpsr, &sctlr);
+
+ efi_info("Entering in %s mode with MMU %sabled\n",
+ ((cpsr & MODE_MASK) == HYP_MODE) ? "HYP" : "SVC",
+ (sctlr & 1) ? "en" : "dis");
+
+ status = efi_bs_call(allocate_pool, EFI_LOADER_DATA,
+ sizeof(*efi_entry_state),
+ (void **)&efi_entry_state);
+ if (status != EFI_SUCCESS) {
+ efi_err("allocate_pool() failed\n");
+ return status;
+ }
+
+ efi_entry_state->cpsr_before_ebs = cpsr;
+ efi_entry_state->sctlr_before_ebs = sctlr;
+
+ status = efi_bs_call(install_configuration_table, &cpu_state_guid,
+ efi_entry_state);
+ if (status != EFI_SUCCESS) {
+ efi_err("install_configuration_table() failed\n");
+ goto free_state;
+ }
+
/* non-LPAE kernels can run anywhere */
if (!IS_ENABLED(CONFIG_ARM_LPAE))
return EFI_SUCCESS;
@@ -19,9 +58,22 @@ efi_status_t check_platform_features(voi
block = cpuid_feature_extract(CPUID_EXT_MMFR0, 0);
if (block < 5) {
efi_err("This LPAE kernel is not supported by your CPU\n");
- return EFI_UNSUPPORTED;
+ status = EFI_UNSUPPORTED;
+ goto drop_table;
}
return EFI_SUCCESS;
+
+drop_table:
+ efi_bs_call(install_configuration_table, &cpu_state_guid, NULL);
+free_state:
+ efi_bs_call(free_pool, efi_entry_state);
+ return status;
+}
+
+void efi_handle_post_ebs_state(void)
+{
+ get_cpu_state(&efi_entry_state->cpsr_after_ebs,
+ &efi_entry_state->sctlr_after_ebs);
}
static efi_guid_t screen_info_guid = LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID;
--- a/drivers/firmware/efi/libstub/efi-stub.c
+++ b/drivers/firmware/efi/libstub/efi-stub.c
@@ -329,6 +329,9 @@ efi_status_t __efiapi efi_pe_entry(efi_h
if (status != EFI_SUCCESS)
goto fail_free_initrd;
+ if (IS_ENABLED(CONFIG_ARM))
+ efi_handle_post_ebs_state();
+
efi_enter_kernel(image_addr, fdt_addr, fdt_totalsize((void *)fdt_addr));
/* not reached */
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -777,4 +777,6 @@ efi_status_t efi_load_initrd(efi_loaded_
unsigned long soft_limit,
unsigned long hard_limit);
+void efi_handle_post_ebs_state(void);
+
#endif
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -350,6 +350,7 @@ void efi_native_runtime_setup(void);
* associated with ConOut
*/
#define LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID EFI_GUID(0xe03fc20a, 0x85dc, 0x406e, 0xb9, 0x0e, 0x4a, 0xb5, 0x02, 0x37, 0x1d, 0x95)
+#define LINUX_EFI_ARM_CPU_STATE_TABLE_GUID EFI_GUID(0xef79e4aa, 0x3c3d, 0x4989, 0xb9, 0x02, 0x07, 0xa9, 0x43, 0xe5, 0x50, 0xd2)
#define LINUX_EFI_LOADER_ENTRY_GUID EFI_GUID(0x4a67b082, 0x0a4c, 0x41cf, 0xb6, 0xc7, 0x44, 0x0b, 0x29, 0xbb, 0x8c, 0x4f)
#define LINUX_EFI_RANDOM_SEED_TABLE_GUID EFI_GUID(0x1ce1e5bc, 0x7ceb, 0x42f2, 0x81, 0xe5, 0x8a, 0xad, 0xf1, 0x80, 0xf5, 0x7b)
#define LINUX_EFI_TPM_EVENT_LOG_GUID EFI_GUID(0xb7799cb0, 0xeca2, 0x4943, 0x96, 0x67, 0x1f, 0xae, 0x07, 0xb7, 0x47, 0xfa)