From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Tue, 24 Mar 2020 14:32:16 +0200
Subject: i2c: drivers: Use generic definitions for bus frequencies
Git-commit: 90224e6468e15d5eb22a10ae1849cf8ca2e7360a
Patch-mainline: v5.7-rc1
References: jsc#SLE-16106
Since we have generic definitions for bus frequencies, let's use them.
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Robert Richter <rrichter@marvell.com>
Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com>
Acked-by: Elie Morisse <syniurge@gmail.com>
Acked-by: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
drivers/i2c/busses/i2c-altera.c | 6 ++--
drivers/i2c/busses/i2c-amd-mp2-plat.c | 27 ++++++++++++--------
drivers/i2c/busses/i2c-aspeed.c | 2 -
drivers/i2c/busses/i2c-axxia.c | 4 +--
drivers/i2c/busses/i2c-bcm-iproc.c | 14 +++++-----
drivers/i2c/busses/i2c-bcm-kona.c | 8 +++---
drivers/i2c/busses/i2c-bcm2835.c | 2 -
drivers/i2c/busses/i2c-cadence.c | 7 +----
drivers/i2c/busses/i2c-designware-platdrv.c | 37 ++++++++++++++++------------
drivers/i2c/busses/i2c-digicolor.c | 3 --
drivers/i2c/busses/i2c-diolan-u2c.c | 12 +++------
drivers/i2c/busses/i2c-efm32.c | 2 -
drivers/i2c/busses/i2c-exynos5.c | 18 +++++--------
drivers/i2c/busses/i2c-hix5hd2.c | 10 +++----
drivers/i2c/busses/i2c-img-scb.c | 4 +--
drivers/i2c/busses/i2c-imx-lpi2c.c | 16 +++---------
drivers/i2c/busses/i2c-imx.c | 5 ---
drivers/i2c/busses/i2c-lpc2k.c | 6 ++--
drivers/i2c/busses/i2c-mt65xx.c | 21 ++++++---------
drivers/i2c/busses/i2c-mt7621.c | 2 -
drivers/i2c/busses/i2c-mv64xxx.c | 6 ++--
drivers/i2c/busses/i2c-mxs.c | 4 +--
drivers/i2c/busses/i2c-nomadik.c | 8 +++---
drivers/i2c/busses/i2c-omap.c | 2 -
drivers/i2c/busses/i2c-owl.c | 9 ++----
drivers/i2c/busses/i2c-qup.c | 11 ++------
drivers/i2c/busses/i2c-riic.c | 6 ++--
drivers/i2c/busses/i2c-rk3x.c | 12 ++++-----
drivers/i2c/busses/i2c-s3c2410.c | 4 +--
drivers/i2c/busses/i2c-sh_mobile.c | 9 ++----
drivers/i2c/busses/i2c-sirf.c | 3 --
drivers/i2c/busses/i2c-sprd.c | 9 +++---
drivers/i2c/busses/i2c-st.c | 6 ++--
drivers/i2c/busses/i2c-stm32f4.c | 10 +++----
drivers/i2c/busses/i2c-stu300.c | 6 ++--
drivers/i2c/busses/i2c-sun6i-p2wi.c | 2 -
drivers/i2c/busses/i2c-synquacer.c | 6 ++--
drivers/i2c/busses/i2c-tegra.c | 18 +++++--------
drivers/i2c/busses/i2c-thunderx-pcidrv.c | 2 -
drivers/i2c/busses/i2c-uniphier-f.c | 6 +---
drivers/i2c/busses/i2c-uniphier.c | 7 +----
drivers/i2c/busses/i2c-wmt.c | 2 -
drivers/i2c/busses/i2c-xlp9xx.c | 8 ++----
drivers/i2c/busses/i2c-xlr.c | 2 -
44 files changed, 165 insertions(+), 199 deletions(-)
--- a/drivers/i2c/busses/i2c-altera.c
+++ b/drivers/i2c/busses/i2c-altera.c
@@ -147,7 +147,7 @@ static void altr_i2c_init(struct altr_i2
(ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_TCT_SHFT);
u32 t_high, t_low;
- if (idev->bus_clk_rate <= 100000) {
+ if (idev->bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ) {
tmp &= ~ALTR_I2C_CTRL_BSPEED;
/* Standard mode SCL 50/50 */
t_high = divisor * 1 / 2;
@@ -423,10 +423,10 @@ static int altr_i2c_probe(struct platfor
&idev->bus_clk_rate);
if (val) {
dev_err(&pdev->dev, "Default to 100kHz\n");
- idev->bus_clk_rate = 100000; /* default clock rate */
+ idev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ; /* default clock rate */
}
- if (idev->bus_clk_rate > 400000) {
+ if (idev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ) {
dev_err(&pdev->dev, "invalid clock-frequency %d\n",
idev->bus_clk_rate);
return -EINVAL;
--- a/drivers/i2c/busses/i2c-amd-mp2-plat.c
+++ b/drivers/i2c/busses/i2c-amd-mp2-plat.c
@@ -201,32 +201,37 @@ static int i2c_amd_resume(struct amd_i2c
}
#endif
+static const u32 supported_speeds[] = {
+ I2C_MAX_HIGH_SPEED_MODE_FREQ,
+ I2C_MAX_TURBO_MODE_FREQ,
+ I2C_MAX_FAST_MODE_PLUS_FREQ,
+ I2C_MAX_FAST_MODE_FREQ,
+ I2C_MAX_STANDARD_MODE_FREQ,
+};
+
static enum speed_enum i2c_amd_get_bus_speed(struct platform_device *pdev)
{
u32 acpi_speed;
int i;
- static const u32 supported_speeds[] = {
- 0, 100000, 400000, 1000000, 1400000, 3400000
- };
acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
/* round down to the lowest standard speed */
- for (i = 1; i < ARRAY_SIZE(supported_speeds); i++) {
- if (acpi_speed < supported_speeds[i])
+ for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
+ if (acpi_speed >= supported_speeds[i])
break;
}
- acpi_speed = supported_speeds[i - 1];
+ acpi_speed = i < ARRAY_SIZE(supported_speeds) ? supported_speeds[i] : 0;
switch (acpi_speed) {
- case 100000:
+ case I2C_MAX_STANDARD_MODE_FREQ:
return speed100k;
- case 400000:
+ case I2C_MAX_FAST_MODE_FREQ:
return speed400k;
- case 1000000:
+ case I2C_MAX_FAST_MODE_PLUS_FREQ:
return speed1000k;
- case 1400000:
+ case I2C_MAX_TURBO_MODE_FREQ:
return speed1400k;
- case 3400000:
+ case I2C_MAX_HIGH_SPEED_MODE_FREQ:
return speed3400k;
default:
return speed400k;
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -993,7 +993,7 @@ static int aspeed_i2c_probe_bus(struct p
if (ret < 0) {
dev_err(&pdev->dev,
"Could not read bus-frequency property\n");
- bus->bus_frequency = 100000;
+ bus->bus_frequency = I2C_MAX_STANDARD_MODE_FREQ;
}
match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node);
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -163,7 +163,7 @@ static int axxia_i2c_init(struct axxia_i
/* Enable Master Mode */
writel(0x1, idev->base + GLOBAL_CONTROL);
- if (idev->bus_clk_rate <= 100000) {
+ if (idev->bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ) {
/* Standard mode SCL 50/50, tSU:DAT = 250 ns */
t_high = divisor * 1 / 2;
t_low = divisor * 1 / 2;
@@ -629,7 +629,7 @@ static int axxia_i2c_probe(struct platfo
of_property_read_u32(np, "clock-frequency", &idev->bus_clk_rate);
if (idev->bus_clk_rate == 0)
- idev->bus_clk_rate = 100000; /* default clock rate */
+ idev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ; /* default clock rate */
ret = clk_prepare_enable(idev->i2c_clk);
if (ret) {
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -821,25 +821,25 @@ static int bcm_iproc_i2c_cfg_speed(struc
if (ret < 0) {
dev_info(iproc_i2c->device,
"unable to interpret clock-frequency DT property\n");
- bus_speed = 100000;
+ bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
}
- if (bus_speed < 100000) {
+ if (bus_speed < I2C_MAX_STANDARD_MODE_FREQ) {
dev_err(iproc_i2c->device, "%d Hz bus speed not supported\n",
bus_speed);
dev_err(iproc_i2c->device,
"valid speeds are 100khz and 400khz\n");
return -EINVAL;
- } else if (bus_speed < 400000) {
- bus_speed = 100000;
+ } else if (bus_speed < I2C_MAX_FAST_MODE_FREQ) {
+ bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
} else {
- bus_speed = 400000;
+ bus_speed = I2C_MAX_FAST_MODE_FREQ;
}
iproc_i2c->bus_speed = bus_speed;
val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET);
val &= ~BIT(TIM_CFG_MODE_400_SHIFT);
- val |= (bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT;
+ val |= (bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT;
iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val);
dev_info(iproc_i2c->device, "bus set to %u Hz\n", bus_speed);
@@ -990,7 +990,7 @@ static int bcm_iproc_i2c_resume(struct d
/* configure to the desired bus speed */
val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET);
val &= ~BIT(TIM_CFG_MODE_400_SHIFT);
- val |= (iproc_i2c->bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT;
+ val |= (iproc_i2c->bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT;
iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val);
bcm_iproc_i2c_enable_disable(iproc_i2c, true);
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -722,16 +722,16 @@ static int bcm_kona_i2c_assign_bus_speed
}
switch (bus_speed) {
- case 100000:
+ case I2C_MAX_STANDARD_MODE_FREQ:
dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
break;
- case 400000:
+ case I2C_MAX_FAST_MODE_FREQ:
dev->std_cfg = &std_cfg_table[BCM_SPD_400K];
break;
- case 1000000:
+ case I2C_MAX_FAST_MODE_PLUS_FREQ:
dev->std_cfg = &std_cfg_table[BCM_SPD_1MHZ];
break;
- case 3400000:
+ case I2C_MAX_HIGH_SPEED_MODE_FREQ:
/* Send mastercode at 100k */
dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
dev->hs_cfg = &hs_cfg_table[BCM_SPD_3P4MHZ];
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -438,7 +438,7 @@ static int bcm2835_i2c_probe(struct plat
if (ret < 0) {
dev_warn(&pdev->dev,
"Could not read clock-frequency property\n");
- bus_clk_rate = 100000;
+ bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;
}
ret = clk_set_rate_exclusive(i2c_dev->bus_clk, bus_clk_rate);
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -104,9 +104,6 @@
#define DRIVER_NAME "cdns-i2c"
-#define CDNS_I2C_SPEED_MAX 400000
-#define CDNS_I2C_SPEED_DEFAULT 100000
-
#define CDNS_I2C_DIVA_MAX 4
#define CDNS_I2C_DIVB_MAX 64
@@ -940,8 +937,8 @@ static int cdns_i2c_probe(struct platfor
ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
&id->i2c_clk);
- if (ret || (id->i2c_clk > CDNS_I2C_SPEED_MAX))
- id->i2c_clk = CDNS_I2C_SPEED_DEFAULT;
+ if (ret || (id->i2c_clk > I2C_MAX_FAST_MODE_FREQ))
+ id->i2c_clk = I2C_MAX_STANDARD_MODE_FREQ;
cdns_i2c_writereg(CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS,
CDNS_I2C_CR_OFFSET);
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -99,16 +99,16 @@ static int dw_i2c_acpi_configure(struct
dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
switch (t->bus_freq_hz) {
- case 100000:
+ case I2C_MAX_STANDARD_MODE_FREQ:
dev->sda_hold_time = ss_ht;
break;
- case 1000000:
+ case I2C_MAX_FAST_MODE_PLUS_FREQ:
dev->sda_hold_time = fp_ht;
break;
- case 3400000:
+ case I2C_MAX_HIGH_SPEED_MODE_FREQ:
dev->sda_hold_time = hs_ht;
break;
- case 400000:
+ case I2C_MAX_FAST_MODE_FREQ:
default:
dev->sda_hold_time = fs_ht;
break;
@@ -197,10 +197,10 @@ static void i2c_dw_configure_master(stru
dev->mode = DW_IC_MASTER;
switch (t->bus_freq_hz) {
- case 100000:
+ case I2C_MAX_STANDARD_MODE_FREQ:
dev->master_cfg |= DW_IC_CON_SPEED_STD;
break;
- case 3400000:
+ case I2C_MAX_HIGH_SPEED_MODE_FREQ:
dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
break;
default:
@@ -248,6 +248,13 @@ static void dw_i2c_plat_pm_cleanup(struc
pm_runtime_put_noidle(dev->dev);
}
+static const u32 supported_speeds[] = {
+ I2C_MAX_HIGH_SPEED_MODE_FREQ,
+ I2C_MAX_FAST_MODE_PLUS_FREQ,
+ I2C_MAX_FAST_MODE_FREQ,
+ I2C_MAX_STANDARD_MODE_FREQ,
+};
+
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -257,9 +264,6 @@ static int dw_i2c_plat_probe(struct plat
u32 acpi_speed;
struct resource *mem;
int i, irq, ret;
- static const int supported_speeds[] = {
- 0, 100000, 400000, 1000000, 3400000
- };
irq = platform_get_irq(pdev, 0);
if (irq < 0)
@@ -297,11 +301,11 @@ static int dw_i2c_plat_probe(struct plat
* Some DSTDs use a non standard speed, round down to the lowest
* standard speed.
*/
- for (i = 1; i < ARRAY_SIZE(supported_speeds); i++) {
- if (acpi_speed < supported_speeds[i])
+ for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
+ if (acpi_speed >= supported_speeds[i])
break;
}
- acpi_speed = supported_speeds[i - 1];
+ acpi_speed = i < ARRAY_SIZE(supported_speeds) ? supported_speeds[i] : 0;
/*
* Find bus speed from the "clock-frequency" device property, ACPI
@@ -312,7 +316,7 @@ static int dw_i2c_plat_probe(struct plat
else if (acpi_speed || t->bus_freq_hz)
t->bus_freq_hz = max(t->bus_freq_hz, acpi_speed);
else
- t->bus_freq_hz = 400000;
+ t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev);
@@ -326,8 +330,11 @@ static int dw_i2c_plat_probe(struct plat
* Only standard mode at 100kHz, fast mode at 400kHz,
* fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
*/
- if (t->bus_freq_hz != 100000 && t->bus_freq_hz != 400000 &&
- t->bus_freq_hz != 1000000 && t->bus_freq_hz != 3400000) {
+ for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
+ if (t->bus_freq_hz == supported_speeds[i])
+ break;
+ }
+ if (i == ARRAY_SIZE(supported_speeds)) {
dev_err(&pdev->dev,
"%d Hz is unsupported, only 100kHz, 400kHz, 1MHz and 3.4MHz are supported\n",
t->bus_freq_hz);
--- a/drivers/i2c/busses/i2c-digicolor.c
+++ b/drivers/i2c/busses/i2c-digicolor.c
@@ -18,7 +18,6 @@
#include <linux/of.h>
#include <linux/platform_device.h>
-#define DEFAULT_FREQ 100000
#define TIMEOUT_MS 100
#define II_CONTROL 0x0
@@ -300,7 +299,7 @@ static int dc_i2c_probe(struct platform_
if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
&i2c->frequency))
- i2c->frequency = DEFAULT_FREQ;
+ i2c->frequency = I2C_MAX_STANDARD_MODE_FREQ;
i2c->dev = &pdev->dev;
platform_set_drvdata(pdev, i2c);
--- a/drivers/i2c/busses/i2c-diolan-u2c.c
+++ b/drivers/i2c/busses/i2c-diolan-u2c.c
@@ -64,8 +64,6 @@
#define U2C_I2C_SPEED_2KHZ 242 /* 2 kHz, minimum speed */
#define U2C_I2C_SPEED(f) ((DIV_ROUND_UP(1000000, (f)) - 10) / 2 + 1)
-#define U2C_I2C_FREQ_FAST 400000
-#define U2C_I2C_FREQ_STD 100000
#define U2C_I2C_FREQ(s) (1000000 / (2 * (s - 1) + 10))
#define DIOLAN_USB_TIMEOUT 100 /* in ms */
@@ -87,7 +85,7 @@ struct i2c_diolan_u2c {
int ocount; /* Number of enqueued messages */
};
-static uint frequency = U2C_I2C_FREQ_STD; /* I2C clock frequency in Hz */
+static uint frequency = I2C_MAX_STANDARD_MODE_FREQ; /* I2C clock frequency in Hz */
module_param(frequency, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(frequency, "I2C clock frequency in hertz");
@@ -299,12 +297,12 @@ static int diolan_init(struct i2c_diolan
{
int speed, ret;
- if (frequency >= 200000) {
+ if (frequency >= 2 * I2C_MAX_STANDARD_MODE_FREQ) {
speed = U2C_I2C_SPEED_FAST;
- frequency = U2C_I2C_FREQ_FAST;
- } else if (frequency >= 100000 || frequency == 0) {
+ frequency = I2C_MAX_FAST_MODE_FREQ;
+ } else if (frequency >= I2C_MAX_STANDARD_MODE_FREQ || frequency == 0) {
speed = U2C_I2C_SPEED_STD;
- frequency = U2C_I2C_FREQ_STD;
+ frequency = I2C_MAX_STANDARD_MODE_FREQ;
} else {
speed = U2C_I2C_SPEED(frequency);
if (speed > U2C_I2C_SPEED_2KHZ)
--- a/drivers/i2c/busses/i2c-efm32.c
+++ b/drivers/i2c/busses/i2c-efm32.c
@@ -388,7 +388,7 @@ static int efm32_i2c_probe(struct platfo
if (!ret) {
dev_dbg(&pdev->dev, "using frequency %u\n", frequency);
} else {
- frequency = 100000;
+ frequency = I2C_MAX_STANDARD_MODE_FREQ;
dev_info(&pdev->dev, "defaulting to 100 kHz\n");
}
ddata->frequency = frequency;
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -164,13 +164,6 @@
#define HSI2C_MASTER_ID(x) ((x & 0xff) << 24)
#define MASTER_ID(x) ((x & 0x7) + 0x08)
-/*
- * Controller operating frequency, timing values for operation
- * are calculated against this frequency
- */
-#define HSI2C_HS_TX_CLOCK 1000000
-#define HSI2C_FS_TX_CLOCK 100000
-
#define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(100))
enum i2c_type_exynos {
@@ -264,6 +257,9 @@ static void exynos5_i2c_clr_pend_irq(str
* exynos5_i2c_set_timing: updates the registers with appropriate
* timing values calculated
*
+ * Timing values for operation are calculated against either 100kHz
+ * or 1MHz controller operating frequency.
+ *
* Returns 0 on success, -EINVAL if the cycle length cannot
* be calculated.
*/
@@ -281,7 +277,7 @@ static int exynos5_i2c_set_timing(struct
unsigned int t_ftl_cycle;
unsigned int clkin = clk_get_rate(i2c->clk);
unsigned int op_clk = hs_timings ? i2c->op_clock :
- (i2c->op_clock >= HSI2C_HS_TX_CLOCK) ? HSI2C_FS_TX_CLOCK :
+ (i2c->op_clock >= I2C_MAX_FAST_MODE_PLUS_FREQ) ? I2C_MAX_STANDARD_MODE_FREQ :
i2c->op_clock;
int div, clk_cycle, temp;
@@ -353,7 +349,7 @@ static int exynos5_hsi2c_clock_setup(str
/* always set Fast Speed timings */
int ret = exynos5_i2c_set_timing(i2c, false);
- if (ret < 0 || i2c->op_clock < HSI2C_HS_TX_CLOCK)
+ if (ret < 0 || i2c->op_clock < I2C_MAX_FAST_MODE_PLUS_FREQ)
return ret;
return exynos5_i2c_set_timing(i2c, true);
@@ -376,7 +372,7 @@ static void exynos5_i2c_init(struct exyn
i2c->regs + HSI2C_CTL);
writel(HSI2C_TRAILING_COUNT, i2c->regs + HSI2C_TRAILIG_CTL);
- if (i2c->op_clock >= HSI2C_HS_TX_CLOCK) {
+ if (i2c->op_clock >= I2C_MAX_FAST_MODE_PLUS_FREQ) {
writel(HSI2C_MASTER_ID(MASTER_ID(i2c->adap.nr)),
i2c->regs + HSI2C_ADDR);
i2c_conf |= HSI2C_HS_MODE;
@@ -748,7 +744,7 @@ static int exynos5_i2c_probe(struct plat
return -ENOMEM;
if (of_property_read_u32(np, "clock-frequency", &i2c->op_clock))
- i2c->op_clock = HSI2C_FS_TX_CLOCK;
+ i2c->op_clock = I2C_MAX_STANDARD_MODE_FREQ;
strlcpy(i2c->adap.name, "exynos5-i2c", sizeof(i2c->adap.name));
i2c->adap.owner = THIS_MODULE;
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -68,8 +68,6 @@
#define I2C_ARBITRATE_INTR BIT(1)
#define I2C_OVER_INTR BIT(0)
-#define HIX5I2C_MAX_FREQ 400000 /* 400k */
-
enum hix5hd2_i2c_state {
HIX5I2C_STAT_RW_ERR = -1,
HIX5I2C_STAT_INIT,
@@ -400,12 +398,12 @@ static int hix5hd2_i2c_probe(struct plat
if (of_property_read_u32(np, "clock-frequency", &freq)) {
/* use 100k as default value */
- priv->freq = 100000;
+ priv->freq = I2C_MAX_STANDARD_MODE_FREQ;
} else {
- if (freq > HIX5I2C_MAX_FREQ) {
- priv->freq = HIX5I2C_MAX_FREQ;
+ if (freq > I2C_MAX_FAST_MODE_FREQ) {
+ priv->freq = I2C_MAX_FAST_MODE_FREQ;
dev_warn(priv->dev, "use max freq %d instead\n",
- HIX5I2C_MAX_FREQ);
+ I2C_MAX_FAST_MODE_FREQ);
} else {
priv->freq = freq;
}
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -304,7 +304,7 @@ static struct img_i2c_timings timings[]
/* Standard mode */
{
.name = "standard",
- .max_bitrate = 100000,
+ .max_bitrate = I2C_MAX_STANDARD_MODE_FREQ,
.tckh = 4000,
.tckl = 4700,
.tsdh = 4700,
@@ -316,7 +316,7 @@ static struct img_i2c_timings timings[]
/* Fast mode */
{
.name = "fast",
- .max_bitrate = 400000,
+ .max_bitrate = I2C_MAX_FAST_MODE_FREQ,
.tckh = 600,
.tckl = 1300,
.tsdh = 600,
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -75,12 +75,6 @@
#define I2C_CLK_RATIO 2
#define CHUNK_DATA 256
-#define LPI2C_DEFAULT_RATE 100000
-#define STARDARD_MAX_BITRATE 400000
-#define FAST_MAX_BITRATE 1000000
-#define FAST_PLUS_MAX_BITRATE 3400000
-#define HIGHSPEED_MAX_BITRATE 5000000
-
#define I2C_PM_TIMEOUT 10 /* ms */
enum lpi2c_imx_mode {
@@ -152,13 +146,13 @@ static void lpi2c_imx_set_mode(struct lp
unsigned int bitrate = lpi2c_imx->bitrate;
enum lpi2c_imx_mode mode;
- if (bitrate < STARDARD_MAX_BITRATE)
+ if (bitrate < I2C_MAX_FAST_MODE_FREQ)
mode = STANDARD;
- else if (bitrate < FAST_MAX_BITRATE)
+ else if (bitrate < I2C_MAX_FAST_MODE_PLUS_FREQ)
mode = FAST;
- else if (bitrate < FAST_PLUS_MAX_BITRATE)
+ else if (bitrate < I2C_MAX_HIGH_SPEED_MODE_FREQ)
mode = FAST_PLUS;
- else if (bitrate < HIGHSPEED_MAX_BITRATE)
+ else if (bitrate < I2C_MAX_ULTRA_FAST_MODE_FREQ)
mode = HS;
else
mode = ULTRA_FAST;
@@ -580,7 +574,7 @@ static int lpi2c_imx_probe(struct platfo
ret = of_property_read_u32(pdev->dev.of_node,
"clock-frequency", &lpi2c_imx->bitrate);
if (ret)
- lpi2c_imx->bitrate = LPI2C_DEFAULT_RATE;
+ lpi2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ;
ret = devm_request_irq(&pdev->dev, irq, lpi2c_imx_isr, 0,
pdev->name, lpi2c_imx);
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -49,9 +49,6 @@
/* This will be the driver name the kernel reports */
#define DRIVER_NAME "imx-i2c"
-/* Default value */
-#define IMX_I2C_BIT_RATE 100000 /* 100kHz */
-
/*
* Enable DMA if transfer byte size is bigger than this threshold.
* As the hardware request, it must bigger than 4 bytes.\
@@ -1193,7 +1190,7 @@ static int i2c_imx_probe(struct platform
goto rpm_disable;
/* Set up clock divider */
- i2c_imx->bitrate = IMX_I2C_BIT_RATE;
+ i2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ;
ret = of_property_read_u32(pdev->dev.of_node,
"clock-frequency", &i2c_imx->bitrate);
if (ret < 0 && pdata && pdata->bitrate)
--- a/drivers/i2c/busses/i2c-lpc2k.c
+++ b/drivers/i2c/busses/i2c-lpc2k.c
@@ -396,7 +396,7 @@ static int i2c_lpc2k_probe(struct platfo
ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
&bus_clk_rate);
if (ret)
- bus_clk_rate = 100000; /* 100 kHz default clock rate */
+ bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;
clkrate = clk_get_rate(i2c->clk);
if (clkrate == 0) {
@@ -407,9 +407,9 @@ static int i2c_lpc2k_probe(struct platfo
/* Setup I2C dividers to generate clock with proper duty cycle */
clkrate = clkrate / bus_clk_rate;
- if (bus_clk_rate <= 100000)
+ if (bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ)
scl_high = (clkrate * I2C_STD_MODE_DUTY) / 100;
- else if (bus_clk_rate <= 400000)
+ else if (bus_clk_rate <= I2C_MAX_FAST_MODE_FREQ)
scl_high = (clkrate * I2C_FAST_MODE_DUTY) / 100;
else
scl_high = (clkrate * I2C_FAST_MODE_PLUS_DUTY) / 100;
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -56,9 +56,6 @@
#define I2C_DMA_4G_MODE 0x0001
#define I2C_DEFAULT_CLK_DIV 5
-#define I2C_DEFAULT_SPEED 100000 /* hz */
-#define MAX_FS_MODE_SPEED 400000
-#define MAX_HS_MODE_SPEED 3400000
#define MAX_SAMPLE_CNT_DIV 8
#define MAX_STEP_CNT_DIV 64
#define MAX_HS_STEP_CNT_DIV 8
@@ -450,10 +447,10 @@ static int mtk_i2c_calculate_speed(struc
unsigned int best_mul;
unsigned int cnt_mul;
- if (target_speed > MAX_HS_MODE_SPEED)
- target_speed = MAX_HS_MODE_SPEED;
+ if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ)
+ target_speed = I2C_MAX_FAST_MODE_PLUS_FREQ;
- if (target_speed > MAX_FS_MODE_SPEED)
+ if (target_speed > I2C_MAX_FAST_MODE_FREQ)
max_step_cnt = MAX_HS_STEP_CNT_DIV;
else
max_step_cnt = MAX_STEP_CNT_DIV;
@@ -514,9 +511,9 @@ static int mtk_i2c_set_speed(struct mtk_
clk_src = parent_clk / i2c->clk_src_div;
target_speed = i2c->speed_hz;
- if (target_speed > MAX_FS_MODE_SPEED) {
+ if (target_speed > I2C_MAX_FAST_MODE_FREQ) {
/* Set master code speed register */
- ret = mtk_i2c_calculate_speed(i2c, clk_src, MAX_FS_MODE_SPEED,
+ ret = mtk_i2c_calculate_speed(i2c, clk_src, I2C_MAX_FAST_MODE_FREQ,
&l_step_cnt, &l_sample_cnt);
if (ret < 0)
return ret;
@@ -581,7 +578,7 @@ static int mtk_i2c_do_transfer(struct mt
control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) &
~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
- if ((i2c->speed_hz > MAX_FS_MODE_SPEED) || (left_num >= 1))
+ if ((i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ) || (left_num >= 1))
control_reg |= I2C_CONTROL_RS;
if (i2c->op == I2C_MASTER_WRRD)
@@ -590,7 +587,7 @@ static int mtk_i2c_do_transfer(struct mt
mtk_i2c_writew(i2c, control_reg, OFFSET_CONTROL);
/* set start condition */
- if (i2c->speed_hz <= I2C_DEFAULT_SPEED)
+ if (i2c->speed_hz <= I2C_MAX_STANDARD_MODE_FREQ)
mtk_i2c_writew(i2c, I2C_ST_START_CON, OFFSET_EXT_CONF);
else
mtk_i2c_writew(i2c, I2C_FS_START_CON, OFFSET_EXT_CONF);
@@ -798,7 +795,7 @@ static int mtk_i2c_transfer(struct i2c_a
}
}
- if (i2c->auto_restart && num >= 2 && i2c->speed_hz > MAX_FS_MODE_SPEED)
+ if (i2c->auto_restart && num >= 2 && i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ)
/* ignore the first restart irq after the master code,
* otherwise the first transfer will be discarded.
*/
@@ -893,7 +890,7 @@ static int mtk_i2c_parse_dt(struct devic
ret = of_property_read_u32(np, "clock-frequency", &i2c->speed_hz);
if (ret < 0)
- i2c->speed_hz = I2C_DEFAULT_SPEED;
+ i2c->speed_hz = I2C_MAX_STANDARD_MODE_FREQ;
ret = of_property_read_u32(np, "clock-div", &i2c->clk_src_div);
if (ret < 0)
--- a/drivers/i2c/busses/i2c-mt7621.c
+++ b/drivers/i2c/busses/i2c-mt7621.c
@@ -300,7 +300,7 @@ static int mtk_i2c_probe(struct platform
if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
&i2c->bus_freq))
- i2c->bus_freq = 100000;
+ i2c->bus_freq = I2C_MAX_STANDARD_MODE_FREQ;
if (i2c->bus_freq == 0) {
dev_warn(i2c->dev, "clock-frequency 0 not supported\n");
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -810,7 +810,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_dat
tclk = clk_get_rate(drv_data->clk);
if (of_property_read_u32(np, "clock-frequency", &bus_freq))
- bus_freq = 100000; /* 100kHz by default */
+ bus_freq = I2C_MAX_STANDARD_MODE_FREQ; /* 100kHz by default */
if (of_device_is_compatible(np, "allwinner,sun4i-a10-i2c") ||
of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
@@ -846,14 +846,14 @@ mv64xxx_of_config(struct mv64xxx_i2c_dat
if (of_device_is_compatible(np, "marvell,mv78230-i2c")) {
drv_data->offload_enabled = true;
/* The delay is only needed in standard mode (100kHz) */
- if (bus_freq <= 100000)
+ if (bus_freq <= I2C_MAX_STANDARD_MODE_FREQ)
drv_data->errata_delay = true;
}
if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) {
drv_data->offload_enabled = false;
/* The delay is only needed in standard mode (100kHz) */
- if (bus_freq <= 100000)
+ if (bus_freq <= I2C_MAX_STANDARD_MODE_FREQ)
drv_data->errata_delay = true;
}
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -731,7 +731,7 @@ static void mxs_i2c_derive_timing(struct
* This is compensated for by subtracting the respective constants
* from the values written to the timing registers.
*/
- if (speed > 100000) {
+ if (speed > I2C_MAX_STANDARD_MODE_FREQ) {
/* fast mode */
low_count = DIV_ROUND_CLOSEST(divider * 13, (13 + 6));
high_count = DIV_ROUND_CLOSEST(divider * 6, (13 + 6));
@@ -769,7 +769,7 @@ static int mxs_i2c_get_ofdata(struct mxs
ret = of_property_read_u32(node, "clock-frequency", &speed);
if (ret) {
dev_warn(dev, "No I2C speed selected, using 100kHz\n");
- speed = 100000;
+ speed = I2C_MAX_STANDARD_MODE_FREQ;
}
mxs_i2c_derive_timing(i2c, speed);
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -396,7 +396,7 @@ static void setup_i2c_controller(struct
* 2 whereas it is 3 for fast and fastplus mode of
* operation. TODO - high speed support.
*/
- div = (dev->clk_freq > 100000) ? 3 : 2;
+ div = (dev->clk_freq > I2C_MAX_STANDARD_MODE_FREQ) ? 3 : 2;
/*
* generate the mask for baud rate counters. The controller
@@ -420,7 +420,7 @@ static void setup_i2c_controller(struct
if (dev->sm > I2C_FREQ_MODE_FAST) {
dev_err(&dev->adev->dev,
"do not support this mode defaulting to std. mode\n");
- brcr2 = i2c_clk/(100000 * 2) & 0xffff;
+ brcr2 = i2c_clk / (I2C_MAX_STANDARD_MODE_FREQ * 2) & 0xffff;
writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
writel(I2C_FREQ_MODE_STANDARD << 4,
dev->virtbase + I2C_CR);
@@ -949,10 +949,10 @@ static void nmk_i2c_of_probe(struct devi
{
/* Default to 100 kHz if no frequency is given in the node */
if (of_property_read_u32(np, "clock-frequency", &nmk->clk_freq))
- nmk->clk_freq = 100000;
+ nmk->clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
/* This driver only supports 'standard' and 'fast' modes of operation. */
- if (nmk->clk_freq <= 100000)
+ if (nmk->clk_freq <= I2C_MAX_STANDARD_MODE_FREQ)
nmk->sm = I2C_FREQ_MODE_STANDARD;
else
nmk->sm = I2C_FREQ_MODE_FAST;
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1382,7 +1382,7 @@ omap_i2c_probe(struct platform_device *p
match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev);
if (match) {
- u32 freq = 100000; /* default to 100000 Hz */
+ u32 freq = I2C_MAX_STANDARD_MODE_FREQ;
pdata = match->data;
omap->flags = pdata->flags;
--- a/drivers/i2c/busses/i2c-owl.c
+++ b/drivers/i2c/busses/i2c-owl.c
@@ -87,9 +87,6 @@
#define OWL_I2C_MAX_RETRIES 50
-#define OWL_I2C_DEF_SPEED_HZ 100000
-#define OWL_I2C_MAX_SPEED_HZ 400000
-
struct owl_i2c_dev {
struct i2c_adapter adap;
struct i2c_msg *msg;
@@ -419,11 +416,11 @@ static int owl_i2c_probe(struct platform
if (of_property_read_u32(dev->of_node, "clock-frequency",
&i2c_dev->bus_freq))
- i2c_dev->bus_freq = OWL_I2C_DEF_SPEED_HZ;
+ i2c_dev->bus_freq = I2C_MAX_STANDARD_MODE_FREQ;
/* We support only frequencies of 100k and 400k for now */
- if (i2c_dev->bus_freq != OWL_I2C_DEF_SPEED_HZ &&
- i2c_dev->bus_freq != OWL_I2C_MAX_SPEED_HZ) {
+ if (i2c_dev->bus_freq != I2C_MAX_STANDARD_MODE_FREQ &&
+ i2c_dev->bus_freq != I2C_MAX_FAST_MODE_FREQ) {
dev_err(dev, "invalid clock-frequency %d\n", i2c_dev->bus_freq);
return -EINVAL;
}
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -136,13 +136,8 @@
*/
#define TOUT_MIN 2
-/* I2C Frequency Modes */
-#define I2C_STANDARD_FREQ 100000
-#define I2C_FAST_MODE_FREQ 400000
-#define I2C_FAST_MODE_PLUS_FREQ 1000000
-
/* Default values. Use these if FW query fails */
-#define DEFAULT_CLK_FREQ I2C_STANDARD_FREQ
+#define DEFAULT_CLK_FREQ I2C_MAX_STANDARD_MODE_FREQ
#define DEFAULT_SRC_CLK 20000000
/*
@@ -1756,7 +1751,7 @@ static int qup_i2c_probe(struct platform
nodma:
/* We support frequencies up to FAST Mode Plus (1MHz) */
- if (!clk_freq || clk_freq > I2C_FAST_MODE_PLUS_FREQ) {
+ if (!clk_freq || clk_freq > I2C_MAX_FAST_MODE_PLUS_FREQ) {
dev_err(qup->dev, "clock frequency not supported %d\n",
clk_freq);
return -EINVAL;
@@ -1861,7 +1856,7 @@ nodma:
qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
hs_div = 3;
- if (clk_freq <= I2C_STANDARD_FREQ) {
+ if (clk_freq <= I2C_MAX_STANDARD_MODE_FREQ) {
fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
} else {
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -287,10 +287,10 @@ static int riic_init_hw(struct riic_dev
pm_runtime_get_sync(riic->adapter.dev.parent);
- if (t->bus_freq_hz > 400000) {
+ if (t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ) {
dev_err(&riic->adapter.dev,
- "unsupported bus speed (%dHz). 400000 max\n",
- t->bus_freq_hz);
+ "unsupported bus speed (%dHz). %d max\n",
+ t->bus_freq_hz, I2C_MAX_FAST_MODE_FREQ);
ret = -EINVAL;
goto out;
}
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -539,9 +539,9 @@ out:
*/
static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed)
{
- if (speed <= 100000)
+ if (speed <= I2C_MAX_STANDARD_MODE_FREQ)
return &standard_mode_spec;
- else if (speed <= 400000)
+ else if (speed <= I2C_MAX_FAST_MODE_FREQ)
return &fast_mode_spec;
else
return &fast_mode_plus_spec;
@@ -578,8 +578,8 @@ static int rk3x_i2c_v0_calc_timings(unsi
int ret = 0;
/* Only support standard-mode and fast-mode */
- if (WARN_ON(t->bus_freq_hz > 400000))
- t->bus_freq_hz = 400000;
+ if (WARN_ON(t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ))
+ t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
/* prevent scl_rate_khz from becoming 0 */
if (WARN_ON(t->bus_freq_hz < 1000))
@@ -758,8 +758,8 @@ static int rk3x_i2c_v1_calc_timings(unsi
int ret = 0;
/* Support standard-mode, fast-mode and fast-mode plus */
- if (WARN_ON(t->bus_freq_hz > 1000000))
- t->bus_freq_hz = 1000000;
+ if (WARN_ON(t->bus_freq_hz > I2C_MAX_FAST_MODE_PLUS_FREQ))
+ t->bus_freq_hz = I2C_MAX_FAST_MODE_PLUS_FREQ;
/* prevent scl_rate_khz from becoming 0 */
if (WARN_ON(t->bus_freq_hz < 1000))
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -835,11 +835,11 @@ static int s3c24xx_i2c_clockrate(struct
int freq;
i2c->clkrate = clkin;
- clkin /= 1000; /* clkin now in KHz */
+ clkin /= 1000; /* clkin now in KHz */
dev_dbg(i2c->dev, "pdata desired frequency %lu\n", pdata->frequency);
- target_frequency = pdata->frequency ? pdata->frequency : 100000;
+ target_frequency = pdata->frequency ?: I2C_MAX_STANDARD_MODE_FREQ;
target_frequency /= 1000; /* Target frequency now in KHz */
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -145,9 +145,6 @@ struct sh_mobile_dt_config {
#define IIC_FLAG_HAS_ICIC67 (1 << 0)
-#define STANDARD_MODE 100000
-#define FAST_MODE 400000
-
/* Register offsets */
#define ICDR 0x00
#define ICCR 0x04
@@ -270,11 +267,11 @@ static int sh_mobile_i2c_init(struct sh_
i2c_clk_khz = clk_get_rate(pd->clk) / 1000 / pd->clks_per_count;
- if (pd->bus_speed == STANDARD_MODE) {
+ if (pd->bus_speed == I2C_MAX_STANDARD_MODE_FREQ) {
tLOW = 47; /* tLOW = 4.7 us */
tHIGH = 40; /* tHD;STA = tHIGH = 4.0 us */
tf = 3; /* tf = 0.3 us */
- } else if (pd->bus_speed == FAST_MODE) {
+ } else if (pd->bus_speed == I2C_MAX_FAST_MODE_FREQ) {
tLOW = 13; /* tLOW = 1.3 us */
tHIGH = 6; /* tHD;STA = tHIGH = 0.6 us */
tf = 3; /* tf = 0.3 us */
@@ -851,7 +848,7 @@ static int sh_mobile_i2c_probe(struct pl
return PTR_ERR(pd->reg);
ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed);
- pd->bus_speed = (ret || !bus_speed) ? STANDARD_MODE : bus_speed;
+ pd->bus_speed = (ret || !bus_speed) ? I2C_MAX_STANDARD_MODE_FREQ : bus_speed;
pd->clks_per_count = 1;
/* Newer variants come with two new bits in ICIC */
--- a/drivers/i2c/busses/i2c-sirf.c
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -62,7 +62,6 @@
#define SIRFSOC_I2C_STOP BIT(6)
#define SIRFSOC_I2C_START BIT(7)
-#define SIRFSOC_I2C_DEFAULT_SPEED 100000
#define SIRFSOC_I2C_ERR_NOACK 1
#define SIRFSOC_I2C_ERR_TIMEOUT 2
@@ -353,7 +352,7 @@ static int i2c_sirfsoc_probe(struct plat
err = of_property_read_u32(pdev->dev.of_node,
"clock-frequency", &bitrate);
if (err < 0)
- bitrate = SIRFSOC_I2C_DEFAULT_SPEED;
+ bitrate = I2C_MAX_STANDARD_MODE_FREQ;
/*
* Due to some hardware design issues, we need to tune the formula.
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -336,9 +336,9 @@ static void sprd_i2c_set_clk(struct sprd
writel(div1, i2c_dev->base + ADDR_DVD1);
/* Start hold timing = hold time(us) * source clock */
- if (freq == 400000)
+ if (freq == I2C_MAX_FAST_MODE_FREQ)
writel((6 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD);
- else if (freq == 100000)
+ else if (freq == I2C_MAX_STANDARD_MODE_FREQ)
writel((4 * apb_clk) / 1000000, i2c_dev->base + ADDR_STA0_DVD);
}
@@ -503,7 +503,7 @@ static int sprd_i2c_probe(struct platfor
snprintf(i2c_dev->adap.name, sizeof(i2c_dev->adap.name),
"%s", "sprd-i2c");
- i2c_dev->bus_freq = 100000;
+ i2c_dev->bus_freq = I2C_MAX_STANDARD_MODE_FREQ;
i2c_dev->adap.owner = THIS_MODULE;
i2c_dev->dev = dev;
i2c_dev->adap.retries = 3;
@@ -517,7 +517,8 @@ static int sprd_i2c_probe(struct platfor
i2c_dev->bus_freq = prop;
/* We only support 100k and 400k now, otherwise will return error. */
- if (i2c_dev->bus_freq != 100000 && i2c_dev->bus_freq != 400000)
+ if (i2c_dev->bus_freq != I2C_MAX_STANDARD_MODE_FREQ &&
+ i2c_dev->bus_freq != I2C_MAX_FAST_MODE_FREQ)
return -EINVAL;
sprd_i2c_clk_init(i2c_dev);
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -213,7 +213,7 @@ static inline void st_i2c_clr_bits(void
*/
static struct st_i2c_timings i2c_timings[] = {
[I2C_MODE_STANDARD] = {
- .rate = 100000,
+ .rate = I2C_MAX_STANDARD_MODE_FREQ,
.rep_start_hold = 4400,
.rep_start_setup = 5170,
.start_hold = 4400,
@@ -222,7 +222,7 @@ static struct st_i2c_timings i2c_timings
.bus_free_time = 5170,
},
[I2C_MODE_FAST] = {
- .rate = 400000,
+ .rate = I2C_MAX_FAST_MODE_FREQ,
.rep_start_hold = 660,
.rep_start_setup = 660,
.start_hold = 660,
@@ -836,7 +836,7 @@ static int st_i2c_probe(struct platform_
i2c_dev->mode = I2C_MODE_STANDARD;
ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
- if ((!ret) && (clk_rate == 400000))
+ if (!ret && (clk_rate == I2C_MAX_FAST_MODE_FREQ))
i2c_dev->mode = I2C_MODE_FAST;
i2c_dev->dev = &pdev->dev;
--- a/drivers/i2c/busses/i2c-stm32f4.c
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -232,10 +232,10 @@ static void stm32f4_i2c_set_speed_mode(s
* In standard mode:
* t_scl_high = t_scl_low = CCR * I2C parent clk period
* So to reach 100 kHz, we have:
- * CCR = I2C parent rate / 100 kHz >> 1
+ * CCR = I2C parent rate / (100 kHz * 2)
*
* For example with parent rate = 2 MHz:
- * CCR = 2000000 / (100000 << 1) = 10
+ * CCR = 2000000 / (100000 * 2) = 10
* t_scl_high = t_scl_low = 10 * (1 / 2000000) = 5000 ns
* t_scl_high + t_scl_low = 10000 ns so 100 kHz is reached
*
@@ -243,7 +243,7 @@ static void stm32f4_i2c_set_speed_mode(s
* parent rate is not higher than 46 MHz . As a result val
* is at most 8 bits wide and so fits into the CCR bits [11:0].
*/
- val = i2c_dev->parent_rate / (100000 << 1);
+ val = i2c_dev->parent_rate / (I2C_MAX_STANDARD_MODE_FREQ * 2);
} else {
/*
* In fast mode, we compute CCR with duty = 0 as with low
@@ -263,7 +263,7 @@ static void stm32f4_i2c_set_speed_mode(s
* parent rate is not higher than 46 MHz . As a result val
* is at most 6 bits wide and so fits into the CCR bits [11:0].
*/
- val = DIV_ROUND_UP(i2c_dev->parent_rate, 400000 * 3);
+ val = DIV_ROUND_UP(i2c_dev->parent_rate, I2C_MAX_FAST_MODE_FREQ * 3);
/* Select Fast mode */
ccr |= STM32F4_I2C_CCR_FS;
@@ -807,7 +807,7 @@ static int stm32f4_i2c_probe(struct plat
i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
- if (!ret && clk_rate >= 400000)
+ if (!ret && clk_rate >= I2C_MAX_FAST_MODE_FREQ)
i2c_dev->speed = STM32_I2C_SPEED_FAST;
i2c_dev->dev = &pdev->dev;
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -132,7 +132,7 @@ enum stu300_error {
#define NUM_ADDR_RESEND_ATTEMPTS 12
/* I2C clock speed, in Hz 0-400kHz*/
-static unsigned int scl_frequency = 100000;
+static unsigned int scl_frequency = I2C_MAX_STANDARD_MODE_FREQ;
module_param(scl_frequency, uint, 0644);
/**
@@ -497,7 +497,7 @@ static int stu300_set_clk(struct stu300_
dev_dbg(&dev->pdev->dev, "Clock rate %lu Hz, I2C bus speed %d Hz "
"virtbase %p\n", clkrate, dev->speed, dev->virtbase);
- if (dev->speed > 100000)
+ if (dev->speed > I2C_MAX_STANDARD_MODE_FREQ)
/* Fast Mode I2C */
val = ((clkrate/dev->speed) - 9)/3 + 1;
else
@@ -518,7 +518,7 @@ static int stu300_set_clk(struct stu300_
return -EINVAL;
}
- if (dev->speed > 100000) {
+ if (dev->speed > I2C_MAX_STANDARD_MODE_FREQ) {
/* CC6..CC0 */
stu300_wr8((val & I2C_CCR_CC_MASK) | I2C_CCR_FMSM,
dev->virtbase + I2C_CCR);
--- a/drivers/i2c/busses/i2c-sun6i-p2wi.c
+++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c
@@ -186,7 +186,7 @@ static int p2wi_probe(struct platform_de
struct device_node *np = dev->of_node;
struct device_node *childnp;
unsigned long parent_clk_freq;
- u32 clk_freq = 100000;
+ u32 clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
struct resource *r;
struct p2wi *p2wi;
u32 slave_addr;
--- a/drivers/i2c/busses/i2c-synquacer.c
+++ b/drivers/i2c/busses/i2c-synquacer.c
@@ -67,10 +67,10 @@
/* STANDARD MODE frequency */
#define SYNQUACER_I2C_CLK_MASTER_STD(rate) \
- DIV_ROUND_UP(DIV_ROUND_UP((rate), 100000) - 2, 2)
+ DIV_ROUND_UP(DIV_ROUND_UP((rate), I2C_MAX_STANDARD_MODE_FREQ) - 2, 2)
/* FAST MODE frequency */
#define SYNQUACER_I2C_CLK_MASTER_FAST(rate) \
- DIV_ROUND_UP((DIV_ROUND_UP((rate), 400000) - 2) * 2, 3)
+ DIV_ROUND_UP((DIV_ROUND_UP((rate), I2C_MAX_FAST_MODE_FREQ) - 2) * 2, 3)
/* (clkrate <= 18000000) */
/* calculate the value of CS bits in CCR register on standard mode */
@@ -602,7 +602,7 @@ static int synquacer_i2c_probe(struct pl
i2c->adapter.nr = pdev->id;
init_completion(&i2c->completion);
- if (bus_speed < 400000)
+ if (bus_speed < I2C_MAX_FAST_MODE_FREQ)
i2c->speed_khz = SYNQUACER_I2C_SPEED_SM;
else
i2c->speed_khz = SYNQUACER_I2C_SPEED_FM;
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -123,10 +123,6 @@
#define I2C_THIGH_SHIFT 8
#define I2C_INTERFACE_TIMING_1 0x98
-#define I2C_STANDARD_MODE 100000
-#define I2C_FAST_MODE 400000
-#define I2C_FAST_PLUS_MODE 1000000
-
/* Packet header size in bytes */
#define I2C_PACKET_HEADER_SIZE 12
@@ -737,8 +733,8 @@ static int tegra_i2c_init(struct tegra_i
I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT;
i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
- if (i2c_dev->bus_clk_rate > I2C_STANDARD_MODE &&
- i2c_dev->bus_clk_rate <= I2C_FAST_PLUS_MODE) {
+ if (i2c_dev->bus_clk_rate > I2C_MAX_STANDARD_MODE_FREQ &&
+ i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_PLUS_FREQ) {
tlow = i2c_dev->hw->tlow_fast_fastplus_mode;
thigh = i2c_dev->hw->thigh_fast_fastplus_mode;
tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode;
@@ -1341,7 +1337,7 @@ static void tegra_i2c_parse_dt(struct te
ret = of_property_read_u32(np, "clock-frequency",
&i2c_dev->bus_clk_rate);
if (ret)
- i2c_dev->bus_clk_rate = 100000; /* default clock rate */
+ i2c_dev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ; /* default clock rate */
multi_mode = of_property_read_bool(np, "multi-master");
i2c_dev->is_multimaster_mode = multi_mode;
@@ -1640,12 +1636,12 @@ static int tegra_i2c_probe(struct platfo
}
}
- if (i2c_dev->bus_clk_rate > I2C_FAST_MODE &&
- i2c_dev->bus_clk_rate <= I2C_FAST_PLUS_MODE)
+ if (i2c_dev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ &&
+ i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_PLUS_FREQ)
i2c_dev->clk_divisor_non_hs_mode =
i2c_dev->hw->clk_divisor_fast_plus_mode;
- else if (i2c_dev->bus_clk_rate > I2C_STANDARD_MODE &&
- i2c_dev->bus_clk_rate <= I2C_FAST_MODE)
+ else if (i2c_dev->bus_clk_rate > I2C_MAX_STANDARD_MODE_FREQ &&
+ i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_FREQ)
i2c_dev->clk_divisor_non_hs_mode =
i2c_dev->hw->clk_divisor_fast_mode;
else
--- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -178,7 +178,7 @@ static int thunder_i2c_probe_pci(struct
thunder_i2c_clock_enable(dev, i2c);
ret = device_property_read_u32(dev, "clock-frequency", &i2c->twsi_freq);
if (ret)
- i2c->twsi_freq = 100000;
+ i2c->twsi_freq = I2C_MAX_STANDARD_MODE_FREQ;
init_waitqueue_head(&i2c->queue);
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -73,8 +73,6 @@
#define UNIPHIER_FI2C_BYTE_WISE BIT(3)
#define UNIPHIER_FI2C_DEFER_STOP_COMP BIT(4)
-#define UNIPHIER_FI2C_DEFAULT_SPEED 100000
-#define UNIPHIER_FI2C_MAX_SPEED 400000
#define UNIPHIER_FI2C_FIFO_SIZE 8
struct uniphier_fi2c_priv {
@@ -559,9 +557,9 @@ static int uniphier_fi2c_probe(struct pl
}
if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
- bus_speed = UNIPHIER_FI2C_DEFAULT_SPEED;
+ bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
- if (!bus_speed || bus_speed > UNIPHIER_FI2C_MAX_SPEED) {
+ if (!bus_speed || bus_speed > I2C_MAX_FAST_MODE_FREQ) {
dev_err(dev, "invalid clock-frequency %d\n", bus_speed);
return -EINVAL;
}
--- a/drivers/i2c/busses/i2c-uniphier.c
+++ b/drivers/i2c/busses/i2c-uniphier.c
@@ -35,9 +35,6 @@
#define UNIPHIER_I2C_NOISE 0x1c /* noise filter control */
#define UNIPHIER_I2C_SETUP 0x20 /* setup time control */
-#define UNIPHIER_I2C_DEFAULT_SPEED 100000
-#define UNIPHIER_I2C_MAX_SPEED 400000
-
struct uniphier_i2c_priv {
struct completion comp;
struct i2c_adapter adap;
@@ -347,9 +344,9 @@ static int uniphier_i2c_probe(struct pla
}
if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
- bus_speed = UNIPHIER_I2C_DEFAULT_SPEED;
+ bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
- if (!bus_speed || bus_speed > UNIPHIER_I2C_MAX_SPEED) {
+ if (!bus_speed || bus_speed > I2C_MAX_FAST_MODE_FREQ) {
dev_err(dev, "invalid clock-frequency %d\n", bus_speed);
return -EINVAL;
}
--- a/drivers/i2c/busses/i2c-wmt.c
+++ b/drivers/i2c/busses/i2c-wmt.c
@@ -399,7 +399,7 @@ static int wmt_i2c_probe(struct platform
i2c_dev->mode = I2C_MODE_STANDARD;
err = of_property_read_u32(np, "clock-frequency", &clk_rate);
- if ((!err) && (clk_rate == 400000))
+ if (!err && (clk_rate == I2C_MAX_FAST_MODE_FREQ))
i2c_dev->mode = I2C_MODE_FAST;
i2c_dev->dev = &pdev->dev;
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -71,8 +71,6 @@
#define XLP9XX_I2C_SLAVEADDR_ADDR_SHIFT 1
#define XLP9XX_I2C_IP_CLK_FREQ 133000000UL
-#define XLP9XX_I2C_DEFAULT_FREQ 100000
-#define XLP9XX_I2C_HIGH_FREQ 400000
#define XLP9XX_I2C_FIFO_SIZE 0x80U
#define XLP9XX_I2C_TIMEOUT_MS 1000
#define XLP9XX_I2C_BUSY_TIMEOUT 50
@@ -476,12 +474,12 @@ static int xlp9xx_i2c_get_frequency(stru
err = device_property_read_u32(&pdev->dev, "clock-frequency", &freq);
if (err) {
- freq = XLP9XX_I2C_DEFAULT_FREQ;
+ freq = I2C_MAX_STANDARD_MODE_FREQ;
dev_dbg(&pdev->dev, "using default frequency %u\n", freq);
- } else if (freq == 0 || freq > XLP9XX_I2C_HIGH_FREQ) {
+ } else if (freq == 0 || freq > I2C_MAX_FAST_MODE_FREQ) {
dev_warn(&pdev->dev, "invalid frequency %u, using default\n",
freq);
- freq = XLP9XX_I2C_DEFAULT_FREQ;
+ freq = I2C_MAX_STANDARD_MODE_FREQ;
}
priv->clk_hz = freq;
--- a/drivers/i2c/busses/i2c-xlr.c
+++ b/drivers/i2c/busses/i2c-xlr.c
@@ -404,7 +404,7 @@ static int xlr_i2c_probe(struct platform
if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
&busfreq))
- busfreq = 100000;
+ busfreq = I2C_MAX_STANDARD_MODE_FREQ;
clk = devm_clk_get(&pdev->dev, NULL);
if (!IS_ERR(clk)) {